INFORMANT-ADV DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Gauge32 FROM SNMPv2-SMI InstanceName, informant FROM WTCS; advanced MODULE-IDENTITY LAST-UPDATED "200807112351Z" ORGANIZATION "Informant Systems, Inc." CONTACT-INFO "Garth Williams 11135-23A Ave Edmonton, AB T6J4W5 Canada Tel: +1 780 434 4113 E-mail: garth.williams@wtcs.org" DESCRIPTION "The MIB module for SNMP Informant Advanced performance counter entries." REVISION "200807112351Z" DESCRIPTION "Multiplied lDiskAvgDiskSecPerRead, lDiskAvgDiskSecPerTransfer, lDiskAvgDiskSecPerWrite, pDiskAvgDiskSecPerRead, pDiskAvgDiskSecPerTransfer, and pDiskAvgDiskSecPerWrite by 1000000 since these values are commonly fractional (less than 1)." REVISION "200804182358Z" DESCRIPTION "Added additional entries which are available in Windows Server 2008." REVISION "200803212339Z" DESCRIPTION "Updated the description fields based on the description in Microsoft Windows Server 2008." REVISION "200802251835Z" DESCRIPTION "Added memoryCommitLimitKBytes and memoryCommitLimitMBytes to support greater than 32-bit memoryCommitLimits." REVISION "200707080543Z" DESCRIPTION "Multiplied lDiskAvgDiskQueueLength, lDiskAvgDiskReadQueueLength, lDiskAvgDiskWriteQueueLength, lDiskAvgDiskSecPerRead, lDiskAvgDiskSecPerTransfer, lDiskAvgDiskSecPerWrite, pDiskAvgDiskQueueLength, pDiskAvgDiskReadQueueLength, pDiskAvgDiskWriteQueueLength, pDiskAvgDiskSecPerRead, pDiskAvgDiskSecPerTransfer, and pDiskAvgDiskSecPerWrite by 1000 since these values are commonly fractional (less than 1)." REVISION "200704121105Z" DESCRIPTION "Added new performance counters which are in Windows Vista." REVISION "200606122258Z" DESCRIPTION ".NET CLR Data is an instance type counter. Changed dotNETCLRData to a SNMP table." REVISION "200506182315Z" DESCRIPTION ".NET CLR Networking is an instance type counter. Changed dotNETCLRNetworking to a SNMP table." REVISION "200402290703Z" DESCRIPTION "Changed the syntax of the datapoints from integer to gauge." REVISION "200401200850Z" DESCRIPTION "The initial revision of this MIB module." ::= { informant 2 } acsPerRsvpServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF ACSPerRSVPServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACS/RSVP Service performance object counters report statistics about Resource Reservation Protocol (RSVP) and Quality of Service (QoS) Admission Control (ACS) activity, flow, bandwidth, RSVP messages sent, and so on. The ACS/RSVP Service object is available if QoS Admission Control is installed, even if the service is not running." ::= { advanced 1 } acsPerRsvpServiceEntry OBJECT-TYPE SYNTAX ACSPerRSVPServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'ACS/RSVP Service' object." INDEX { acsPerRsvpSvcInstance } ::= { acsPerRsvpServiceTable 1 } ACSPerRSVPServiceEntry ::= SEQUENCE { acsPerRsvpSvcInstance InstanceName, acsPerRsvpSvcBytesInQoSNotify Gauge32, acsPerRsvpSvcFailedQoSRequests Gauge32, acsPerRsvpSvcFailedQoSSends Gauge32, acsPerRsvpSvcNetworkInterfaces Gauge32, acsPerRsvpSvcNetworkSockets Gauge32, acsPerRsvpSvcQoSNotifications Gauge32, acsPerRsvpSvcQoSSockets Gauge32, acsPerRsvpSvcQoSEnabledReceivers Gauge32, acsPerRsvpSvcQoSEnabledSenders Gauge32, acsPerRsvpSvcRSVPSessions Gauge32, acsPerRsvpSvcTimers Gauge32 } acsPerRsvpSvcInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { acsPerRsvpServiceEntry 1 } acsPerRsvpSvcBytesInQoSNotify OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A running total of the number of bytes delivered in QoS Notifications to QoS-enabled applications." ::= { acsPerRsvpServiceEntry 2 } acsPerRsvpSvcFailedQoSRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of QoS requests generated by QoS-enabled applications that have been rejected by the ACS/RSVP service. Failed QoS requests can be caused by invalid QoS requests." ::= { acsPerRsvpServiceEntry 3 } acsPerRsvpSvcFailedQoSSends OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of QoS notifications the ACS/RSVP service that could not be sent to the QoS applications. Failed QoS sends can be caused by terminated applications." ::= { acsPerRsvpServiceEntry 4 } acsPerRsvpSvcNetworkInterfaces OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local network interfaces visible to, and used by the RSVP service." ::= { acsPerRsvpServiceEntry 5 } acsPerRsvpSvcNetworkSockets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of raw sockets opened for the purpose of RSVP signaling." ::= { acsPerRsvpServiceEntry 6 } acsPerRsvpSvcQoSNotifications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of QoS notifications delivered to QoS-enabled applications by the QoS RSVP service." ::= { acsPerRsvpServiceEntry 7 } acsPerRsvpSvcQoSSockets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sockets that are currently QoS enabled." ::= { acsPerRsvpServiceEntry 8 } acsPerRsvpSvcQoSEnabledReceivers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of RESV messages sent for QoS-enabled receivers. This number increments each time a RESV is refreshed." ::= { acsPerRsvpServiceEntry 9 } acsPerRsvpSvcQoSEnabledSenders OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of PATH messages sent for QoS-enabled senders. This number increments each time a PATH is refreshed." ::= { acsPerRsvpServiceEntry 10 } acsPerRsvpSvcRSVPSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of active RSVP sessions on the ACS/RSVP service." ::= { acsPerRsvpServiceEntry 11 } acsPerRsvpSvcTimers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of timer events scheduled to take place. Shows the activity level of the ACS/RSVP service." ::= { acsPerRsvpServiceEntry 12 } activeServerPages OBJECT-IDENTITY STATUS current DESCRIPTION "The Active Server Pages performance object monitors errors, requests, sessions, or other data generated from Active Server Pages (ASP) applications." ::= { advanced 2 } aspDebuggingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of debugging document requests." ::= { activeServerPages 1 } aspEngineFlushNotifications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of engines invalidated in the cache due to change notification." ::= { activeServerPages 2 } aspErrorsDuringScriptRuntime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests failed due to runtime errors." ::= { activeServerPages 3 } aspErrorsFromASPPreprocessor OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests failed due to preprocessor errors." ::= { activeServerPages 4 } aspErrorsFromScriptCompilers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests failed due to script compilation errors." ::= { activeServerPages 5 } aspErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of errors per second." ::= { activeServerPages 6 } aspInMemoryTemplateCacheHitRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of requests found in cached in memory." ::= { activeServerPages 7 } aspInMemoryTemplatesCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of compiled templates cached in memory." ::= { activeServerPages 8 } aspRequestBytesInTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of all requests." ::= { activeServerPages 9 } aspRequestBytesOutTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of responses sent to clients. This does not include standard HTTP response headers." ::= { activeServerPages 10 } aspRequestExecutionTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds that it took to execute the most recent request." ::= { activeServerPages 11 } aspRequestWaitTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds the most recent request was waiting in the queue." ::= { activeServerPages 12 } aspRequestsDisconnected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that were disconnected due to communication failure." ::= { activeServerPages 13 } aspRequestsExecuting OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests currently executing." ::= { activeServerPages 14 } aspRequestsFailedTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests failed due to errors, authorization failure, and rejections." ::= { activeServerPages 15 } aspRequestsNotAuthorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests failed due to insufficient access rights." ::= { activeServerPages 16 } aspRequestsNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests for files that were no found." ::= { activeServerPages 17 } aspRequestsQueued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests waiting for service from the queue." ::= { activeServerPages 18 } aspRequestsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests not executed because there were insufficient resources to process them." ::= { activeServerPages 19 } aspRequestsSucceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that executed successfully." ::= { activeServerPages 20 } aspRequestsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that timed out." ::= { activeServerPages 21 } aspRequestsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests since the service was started." ::= { activeServerPages 22 } aspRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests executed per second." ::= { activeServerPages 23 } aspScriptEngineCacheHitRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of requests found in script engine cache." ::= { activeServerPages 24 } aspScriptEnginesCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of script engines in cache." ::= { activeServerPages 25 } aspSessionDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds that the most recent session persisted." ::= { activeServerPages 26 } aspSessionsCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions being serviced." ::= { activeServerPages 27 } aspSessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { activeServerPages 28 } aspSessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sessions since the service was started." ::= { activeServerPages 29 } aspTemplateCacheHitRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percent of requests found in template cache." ::= { activeServerPages 30 } aspTemplateNotifications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of templates invalidated in the cache due to change notification." ::= { activeServerPages 31 } aspTemplatesCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of templates currently cached." ::= { activeServerPages 32 } aspTransactionsAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions aborted." ::= { activeServerPages 33 } aspTransactionsCommitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions committed." ::= { activeServerPages 34 } aspTransactionsPending OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transactions in progress." ::= { activeServerPages 35 } aspTransactionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transactions since the service was started." ::= { activeServerPages 36 } aspTransactionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transactions started per second." ::= { activeServerPages 37 } appleTalkTable OBJECT-TYPE SYNTAX SEQUENCE OF AppleTalkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The AppleTalk performance object consists of counters that monitor traffic on the AppleTalk network." ::= { advanced 3 } appleTalkEntry OBJECT-TYPE SYNTAX AppleTalkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'AppleTalk' object." INDEX { atInstance } ::= { appleTalkTable 1 } AppleTalkEntry ::= SEQUENCE { atInstance InstanceName, atAARPPacketsPerSec Gauge32, atATPALOResponsePerSec Gauge32, atATPPacketsPerSec Gauge32, atATPRecvdReleasePerSec Gauge32, atATPResponseTimouts Gauge32, atATPRetriesLocal Gauge32, atATPRetriesRemote Gauge32, atATPXOResponsePerSec Gauge32, atAverageTimePerAARPPacket Gauge32, atAverageTimePerATPPacket Gauge32, atAverageTimePerDDPPacket Gauge32, atAverageTimePerNBPPacket Gauge32, atAverageTimePerRTMPPacket Gauge32, atAverageTimePerZIPPacket Gauge32, atBytesInPerSec Gauge32, atBytesOutPerSec Gauge32, atCurrentNonPagedPool Gauge32, atDDPPacketsPerSec Gauge32, atNBPPacketsPerSec Gauge32, atPacketsInPerSec Gauge32, atPacketsOutPerSec Gauge32, atPacketsRoutedInPerSec Gauge32, atPacketsRoutedOutPerSec Gauge32, atPacketsDropped Gauge32, atRTMPPacketsPerSec Gauge32, atZIPPacketsPerSec Gauge32 } atInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { appleTalkEntry 1 } atAARPPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AARP packets per second received by Appletalk on this port." ::= { appleTalkEntry 2 } atATPALOResponsePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ATP At-least-once transaction responses per second on this port." ::= { appleTalkEntry 3 } atATPPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ATP packets per second received by Appletalk on this port." ::= { appleTalkEntry 4 } atATPRecvdReleasePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ATP transaction release packets per second received on this port." ::= { appleTalkEntry 5 } atATPResponseTimouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ATP release timers that have expired on this port." ::= { appleTalkEntry 6 } atATPRetriesLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ATP requests retransmitted on this port." ::= { appleTalkEntry 7 } atATPRetriesRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ATP requests retransmitted to this port." ::= { appleTalkEntry 8 } atATPXOResponsePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ATP Exactly-once transaction responses per second on this port." ::= { appleTalkEntry 9 } atAverageTimePerAARPPacket OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds to process an AARP packet on this port." ::= { appleTalkEntry 10 } atAverageTimePerATPPacket OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds to process an ATP packet on this port." ::= { appleTalkEntry 11 } atAverageTimePerDDPPacket OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds to process a DDP packet on this port." ::= { appleTalkEntry 12 } atAverageTimePerNBPPacket OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds to process an NBP packet on this port." ::= { appleTalkEntry 13 } atAverageTimePerRTMPPacket OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds to process an RTMP packet on this port." ::= { appleTalkEntry 14 } atAverageTimePerZIPPacket OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds to process a ZIP packet on this port." ::= { appleTalkEntry 15 } atBytesInPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes received per second by Appletalk on this port." ::= { appleTalkEntry 16 } atBytesOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes sent per second by Appletalk on this port." ::= { appleTalkEntry 17 } atCurrentNonPagedPool OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current amount of nonpaged memory resources used by AppleTalk." ::= { appleTalkEntry 18 } atDDPPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DDP packets per second received by Appletalk on this port." ::= { appleTalkEntry 19 } atNBPPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of NBP packets per second received by Appletalk on this port." ::= { appleTalkEntry 20 } atPacketsInPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets received per second by Appletalk on this port." ::= { appleTalkEntry 21 } atPacketsOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets sent per second by Appletalk on this port." ::= { appleTalkEntry 22 } atPacketsRoutedInPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets routed in on this port." ::= { appleTalkEntry 23 } atPacketsRoutedOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets routed out on this port." ::= { appleTalkEntry 24 } atPacketsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of packets dropped due to resource limitations on this port." ::= { appleTalkEntry 25 } atRTMPPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of RTMP packets per second received by Appletalk on this port." ::= { appleTalkEntry 26 } atZIPPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ZIP packets per second received by Appletalk on this port." ::= { appleTalkEntry 27 } aspDotNET OBJECT-IDENTITY STATUS current DESCRIPTION "ASP.NET supports the following ASP.NET system performance counters. These aggregate information for all ASP.NET applications on a Web server computer, or they apply generally to a system of ASP.NET servers running the same applications. These can include Web farms and Web gardens." ::= { advanced 4 } adnApplicationRestarts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the application has been restarted during the web server's lifetime." ::= { aspDotNET 1 } adnApplicationsRunning OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of currently running web applications." ::= { aspDotNET 2 } adnRequestExecutionTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds that it took to execute the most recent request." ::= { aspDotNET 3 } adnRequestWaitTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds the most recent request was waiting in the queue." ::= { aspDotNET 4 } adnRequestsCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of requests, including those that are queued, currently executing, or waiting to be written to the client. Under the ASP.NET process model, when this counter exceeds the requestQueueLimit defined in the processModel configuration section, ASP.NET will begin rejecting requests." ::= { aspDotNET 5 } adnRequestsDisconnected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests disconnected due to communication errors or user terminated." ::= { aspDotNET 6 } adnRequestsQueued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests waiting to be processed." ::= { aspDotNET 7 } adnRequestsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests rejected because the request queue was full." ::= { aspDotNET 8 } adnStateServerSessionsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been explicitly abandoned." ::= { aspDotNET 9 } adnStateServerSessionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions currently active." ::= { aspDotNET 10 } adnStateServerSessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { aspDotNET 11 } adnStateServerSessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions total." ::= { aspDotNET 12 } adnWorkerProcessRestarts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a worker process has restarted on the machine." ::= { aspDotNET 13 } adnWorkerProcessesRunning OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of worker processes running on the machine." ::= { aspDotNET 14 } adnAuditFailureEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit failures in the application since it was started." ::= { aspDotNET 15 } adnAuditSuccessEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit successes in the application since it was started." ::= { aspDotNET 16 } adnErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error events raised since the application was started." ::= { aspDotNET 17 } adnInfrastructErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HTTP error events raised since the application was started." ::= { aspDotNET 18 } adnRequestErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of runtime error events raised since the application was started." ::= { aspDotNET 19 } aspDotNETApplicationsTable OBJECT-TYPE SYNTAX SEQUENCE OF ASPNETApplicationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ASP.NET supports the following application performance counters, which you can use to monitor the performance of a single instance of an ASP.NET application. A unique instance appears for these counters, named __Total__, which aggregates counters for all applications on a Web server (similar to the global counters described in the first section of this topic). The __Total__ instance is always available. The counters will display zero when no applications are present on the server." ::= { advanced 5 } aspDotNETApplicationsEntry OBJECT-TYPE SYNTAX ASPNETApplicationsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'ASP.NET Applications' object." INDEX { adnApplInstance } ::= { aspDotNETApplicationsTable 1 } ASPNETApplicationsEntry ::= SEQUENCE { adnApplInstance InstanceName, adnApplAnonymousRequests Gauge32, adnApplAnonymousRequestsPerSec Gauge32, adnApplCacheAPIEntries Gauge32, adnApplCacheAPIHitRatio Gauge32, adnApplCacheAPIHits Gauge32, adnApplCacheAPIMisses Gauge32, adnApplCacheAPITurnoverRate Gauge32, adnApplCacheTotalEntries Gauge32, adnApplCacheTotalHitRatio Gauge32, adnApplCacheTotalHits Gauge32, adnApplCacheTotalMisses Gauge32, adnApplCacheTotalTurnoverRate Gauge32, adnApplCompilationsTotal Gauge32, adnApplDebuggingRequests Gauge32, adnApplErrorsCompilation Gauge32, adnApplErrorsExecution Gauge32, adnApplErrorsPreprocessing Gauge32, adnApplErrorsTotal Gauge32, adnApplErrorsTotalPerSec Gauge32, adnApplErrorsUnhandledExec Gauge32, adnApplErrorsUnhandledExecPerSec Gauge32, adnApplOutputCacheEntries Gauge32, adnApplOutputCacheHitRatio Gauge32, adnApplOutputCacheHits Gauge32, adnApplOutputCacheMisses Gauge32, adnApplOutputCacheTurnoverRate Gauge32, adnApplPipelineInstanceCount Gauge32, adnApplRequestBytesInTotal Gauge32, adnApplRequestBytesOutTotal Gauge32, adnApplRequestsExecuting Gauge32, adnApplRequestsFailed Gauge32, adnApplRequestsInApplQueue Gauge32, adnApplRequestsNotAuthorized Gauge32, adnApplRequestsNotFound Gauge32, adnApplRequestsSucceeded Gauge32, adnApplRequestsTimedOut Gauge32, adnApplRequestsTotal Gauge32, adnApplRequestsPerSec Gauge32, adnApplSessionSQLSrvrConnTotal Gauge32, adnApplSessionStateSrvrConnTotal Gauge32, adnApplSessionsAbandoned Gauge32, adnApplSessionsActive Gauge32, adnApplSessionsTimedOut Gauge32, adnApplSessionsTotal Gauge32, adnApplTransactionsAborted Gauge32, adnApplTransactionsCommitted Gauge32, adnApplTransactionsPending Gauge32, adnApplTransactionsTotal Gauge32, adnApplTransactionsPerSec Gauge32, adnApplApplicationLifetimeEvents Gauge32, adnApplApplLifetimeEventsPerSec Gauge32, adnApplAuditFailureEventsRaised Gauge32, adnApplAuditSuccessEventsRaised Gauge32, adnApplErrorEventsRaised Gauge32, adnApplErrorEventsRaisedPerSec Gauge32, adnApplEventsRaised Gauge32, adnApplEventsRaisedPerSec Gauge32, adnApplFormAuthenticationFailure Gauge32, adnApplFormAuthenticationSuccess Gauge32, adnApplInfraErrEventRaised Gauge32, adnApplInfraErrEventRaisedPerSec Gauge32, adnApplMembershipAuthFailure Gauge32, adnApplMembershipAuthSuccess Gauge32, adnApplReqErrorEventRaised Gauge32, adnApplReqErrorEventRaisedPerSec Gauge32, adnApplRequestEventsRaised Gauge32, adnApplRequestEventsRaisedPerSec Gauge32, adnApplRequestExecutionTime Gauge32, adnApplRequestWaitTime Gauge32, adnApplRequestsDisconnected Gauge32, adnApplRequestsRejected Gauge32, adnApplViewstateMACValidFailure Gauge32, adnApplCachePrcntMchneMemLimUsed Gauge32, adnApplCachePrcntPrcMemLimitUsed Gauge32, adnApplCacheAPITrims Gauge32, adnApplCacheTotalTrims Gauge32, adnApplOutputCacheTrims Gauge32 } adnApplInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { aspDotNETApplicationsEntry 1 } adnApplAnonymousRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests utilizing anonymous authentication." ::= { aspDotNETApplicationsEntry 2 } adnApplAnonymousRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Authentication Anonymous Requests/Sec" ::= { aspDotNETApplicationsEntry 3 } adnApplCacheAPIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries within the cache added by the user." ::= { aspDotNETApplicationsEntry 4 } adnApplCacheAPIHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits called from user code." ::= { aspDotNETApplicationsEntry 5 } adnApplCacheAPIHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cache hits from user code." ::= { aspDotNETApplicationsEntry 6 } adnApplCacheAPIMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cache misses called from user code." ::= { aspDotNETApplicationsEntry 7 } adnApplCacheAPITurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the API cache per second." ::= { aspDotNETApplicationsEntry 8 } adnApplCacheTotalEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries within the cache (both internal and user added)" ::= { aspDotNETApplicationsEntry 9 } adnApplCacheTotalHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits from all cache calls." ::= { aspDotNETApplicationsEntry 10 } adnApplCacheTotalHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hits from the cache." ::= { aspDotNETApplicationsEntry 11 } adnApplCacheTotalMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of cache misses." ::= { aspDotNETApplicationsEntry 12 } adnApplCacheTotalTurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the total cache per second." ::= { aspDotNETApplicationsEntry 13 } adnApplCompilationsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of .asax, .ascx, .ashx, .asmx, or .aspx source files dynamically compiled." ::= { aspDotNETApplicationsEntry 14 } adnApplDebuggingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of debugging requests processed." ::= { aspDotNETApplicationsEntry 15 } adnApplErrorsCompilation OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during compilation." ::= { aspDotNETApplicationsEntry 16 } adnApplErrorsExecution OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during the processing of a request." ::= { aspDotNETApplicationsEntry 17 } adnApplErrorsPreprocessing OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during parsing and configuration." ::= { aspDotNETApplicationsEntry 18 } adnApplErrorsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of errors occurred." ::= { aspDotNETApplicationsEntry 19 } adnApplErrorsTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of errors occurred." ::= { aspDotNETApplicationsEntry 20 } adnApplErrorsUnhandledExec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors not handled by user code, but by the default error handler." ::= { aspDotNETApplicationsEntry 21 } adnApplErrorsUnhandledExecPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of unhandled errors." ::= { aspDotNETApplicationsEntry 22 } adnApplOutputCacheEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries in the output cache." ::= { aspDotNETApplicationsEntry 23 } adnApplOutputCacheHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits to requests for output cacheable requests." ::= { aspDotNETApplicationsEntry 24 } adnApplOutputCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of output cacheable requests served from the output cache." ::= { aspDotNETApplicationsEntry 25 } adnApplOutputCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of output cacheable requests not served from the output cache." ::= { aspDotNETApplicationsEntry 26 } adnApplOutputCacheTurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the output cache per second." ::= { aspDotNETApplicationsEntry 27 } adnApplPipelineInstanceCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active pipeline instances." ::= { aspDotNETApplicationsEntry 28 } adnApplRequestBytesInTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of all requests." ::= { aspDotNETApplicationsEntry 29 } adnApplRequestBytesOutTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of responses sent to a client. This does not include standard HTTP response headers." ::= { aspDotNETApplicationsEntry 30 } adnApplRequestsExecuting OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests currently executing." ::= { aspDotNETApplicationsEntry 31 } adnApplRequestsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of failed requests." ::= { aspDotNETApplicationsEntry 32 } adnApplRequestsInApplQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests in the application request queue." ::= { aspDotNETApplicationsEntry 33 } adnApplRequestsNotAuthorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests failed due to unauthorized access." ::= { aspDotNETApplicationsEntry 34 } adnApplRequestsNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests for resources that were not found." ::= { aspDotNETApplicationsEntry 35 } adnApplRequestsSucceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that executed successfully." ::= { aspDotNETApplicationsEntry 36 } adnApplRequestsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that timed out." ::= { aspDotNETApplicationsEntry 37 } adnApplRequestsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests since the application was started." ::= { aspDotNETApplicationsEntry 38 } adnApplRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests executed per second." ::= { aspDotNETApplicationsEntry 39 } adnApplSessionSQLSrvrConnTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections to the SQL Server used by session state." ::= { aspDotNETApplicationsEntry 40 } adnApplSessionStateSrvrConnTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections to the State Server used by session state." ::= { aspDotNETApplicationsEntry 41 } adnApplSessionsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been explicitly abandoned." ::= { aspDotNETApplicationsEntry 42 } adnApplSessionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions currently active." ::= { aspDotNETApplicationsEntry 43 } adnApplSessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { aspDotNETApplicationsEntry 44 } adnApplSessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of sessions since the application was started." ::= { aspDotNETApplicationsEntry 45 } adnApplTransactionsAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions aborted." ::= { aspDotNETApplicationsEntry 46 } adnApplTransactionsCommitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions committed." ::= { aspDotNETApplicationsEntry 47 } adnApplTransactionsPending OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transactions in progress." ::= { aspDotNETApplicationsEntry 48 } adnApplTransactionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transactions since the application was started." ::= { aspDotNETApplicationsEntry 49 } adnApplTransactionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transactions started per second." ::= { aspDotNETApplicationsEntry 50 } adnApplApplicationLifetimeEvents OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of application events raised since the application was started." ::= { aspDotNETApplicationsEntry 51 } adnApplApplLifetimeEventsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of application events raised per second." ::= { aspDotNETApplicationsEntry 52 } adnApplAuditFailureEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit failures in the application since it was started." ::= { aspDotNETApplicationsEntry 53 } adnApplAuditSuccessEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit successes in the application since it was started." ::= { aspDotNETApplicationsEntry 54 } adnApplErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error events raised since the application was started." ::= { aspDotNETApplicationsEntry 55 } adnApplErrorEventsRaisedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error events per second." ::= { aspDotNETApplicationsEntry 56 } adnApplEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of instrumentation events raised since the application was started." ::= { aspDotNETApplicationsEntry 57 } adnApplEventsRaisedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of instrumentation events per second." ::= { aspDotNETApplicationsEntry 58 } adnApplFormAuthenticationFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failed forms authentication ticket validations since the application was started." ::= { aspDotNETApplicationsEntry 59 } adnApplFormAuthenticationSuccess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful forms authentication ticket validations since the application was started." ::= { aspDotNETApplicationsEntry 60 } adnApplInfraErrEventRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HTTP error events raised since the application was started." ::= { aspDotNETApplicationsEntry 61 } adnApplInfraErrEventRaisedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HTTP error events raised per second." ::= { aspDotNETApplicationsEntry 62 } adnApplMembershipAuthFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failed membership credential validations since the application was started." ::= { aspDotNETApplicationsEntry 63 } adnApplMembershipAuthSuccess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful membership credential validations since the application was started." ::= { aspDotNETApplicationsEntry 64 } adnApplReqErrorEventRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of runtime error events raised since the application was started." ::= { aspDotNETApplicationsEntry 65 } adnApplReqErrorEventRaisedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of runtime error events per second." ::= { aspDotNETApplicationsEntry 66 } adnApplRequestEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of request events raised since the application was started" ::= { aspDotNETApplicationsEntry 67 } adnApplRequestEventsRaisedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of request events raised per second." ::= { aspDotNETApplicationsEntry 68 } adnApplRequestExecutionTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds that it took to execute the most recent request." ::= { aspDotNETApplicationsEntry 69 } adnApplRequestWaitTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds the most recent request was waiting in the queue." ::= { aspDotNETApplicationsEntry 70 } adnApplRequestsDisconnected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests disconnected due to communication errors or user terminated." ::= { aspDotNETApplicationsEntry 71 } adnApplRequestsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests rejected because the application request queue was full." ::= { aspDotNETApplicationsEntry 72 } adnApplViewstateMACValidFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of viewstate MAC validations that failed since the application was started." ::= { aspDotNETApplicationsEntry 73 } adnApplCachePrcntMchneMemLimUsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of physical memory used by the machine divided by the physical memory limit for the cache, as a percentage. When this reaches 100%, half of the cache entries will be forcibly removed. The __Total__ instance is the average of all instances, and therefore cannot be used to determine when cache entries will be forcibly removed." ::= { aspDotNETApplicationsEntry 74 } adnApplCachePrcntPrcMemLimitUsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of private bytes for the worker process divided by the private bytes memory limit for the cache, as a percentage. When this reaches 100%, half of the cache entries will be forcibly removed. The __Total__ instance is the average of all instances, and therefore cannot be used to determine when cache entries will be forcibly removed." ::= { aspDotNETApplicationsEntry 75 } adnApplCacheAPITrims OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries forcibly removed from the cache due to memory pressure that were originally inserted into the cache using one of the public cache APIs." ::= { aspDotNETApplicationsEntry 76 } adnApplCacheTotalTrims OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries forcibly removed from the cache due to memory pressure." ::= { aspDotNETApplicationsEntry 77 } adnApplOutputCacheTrims OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries forcibly removed from the cache due to memory pressure that were originally inserted into the cache by the output cache feature." ::= { aspDotNETApplicationsEntry 78 } browser OBJECT-IDENTITY STATUS current DESCRIPTION "The Browser performance object consists of counters that measure the rates of announcements, enumerations, and other browser transmissions." ::= { advanced 6 } browserAnnouncementsDomainPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Announcements Domain/sec is the rate at which a domain has announced itself to the network." ::= { browser 1 } browserAnnouncementsServerPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Announcements Server/sec is the rate at which the servers in this domain have announced themselves to this server." ::= { browser 2 } browserAnnouncementsTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Announcements Total/sec is the sum of Announcements Server/sec and Announcements Domain/sec." ::= { browser 3 } browserDuplicateMasterAnnounce OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duplicate Master Announcements indicates the number of times that the master browser has detected another master browser on the same domain." ::= { browser 4 } browserElectionPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Election Packets/sec is the rate at which browser election packets have been received by this workstation." ::= { browser 5 } browserEnumerationsDomainPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerations Domain/sec is the rate at which domain browse requests have been processed by this workstation." ::= { browser 6 } browserEnumerationsOtherPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerations Other/sec is the rate at which browse requests processed by this workstation are not domain or server browse requests." ::= { browser 7 } browserEnumerationsServerPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerations Server/sec is the rate at which server browse requests have been processed by this workstation." ::= { browser 8 } browserEnumerationsTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerations Total/sec is the rate at which browse requests have been processed by this workstation. This is the sum of Enumerations Server/sec, Enumerations Domain/sec, and Enumerations Other/sec." ::= { browser 9 } browserIllegalDatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Illegal Datagrams/sec is the rate at which incorrectly formatted datagrams have been received by the workstation." ::= { browser 10 } browserMailslotAllocationsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mailslot Allocations Failed is the number of times the datagram receiver has failed to allocate a buffer to hold a user mailslot write." ::= { browser 11 } browserMailslotOpensFailedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mailslot Opens Failed/sec indicates the rate at which mailslot messages to be delivered to mailslots that are not present are received by this workstation." ::= { browser 12 } browserMailslotReceivesFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mailslot Receives Failed indicates the number of mailslot messages that could not be received due to transport failures." ::= { browser 13 } browserMailslotWritesFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mailslot Writes Failed is the total number of mailslot messages that have been successfully received, but that could not be written to the mailslot." ::= { browser 14 } browserMailslotWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mailslot Writes/sec is the rate at which mailslot messages have been successfully received." ::= { browser 15 } browserMissedMailslotDatagrams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Missed Mailslot Datagrams is the number of Mailslot Datagrams that have been discarded due to configuration or allocation limits." ::= { browser 16 } browserMissedServerAnnouncements OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Missed Server Announcements is the number of server announcements that have been missed due to configuration or allocation limits." ::= { browser 17 } browserMissedServerListRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Missed Server List Requests is the number of requests to retrieve a list of browser servers that were received by this workstation, but could not be processed." ::= { browser 18 } browserServerAllocFailedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Announce Allocations Failed/sec is the rate at which server (or domain) announcements have failed due to lack of memory." ::= { browser 19 } browserServerListRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server List Requests/sec is the rate at which requests to retrieve a list of browser servers have been processed by this workstation." ::= { browser 20 } cache OBJECT-IDENTITY STATUS current DESCRIPTION "The Cache performance object consists of counters that monitor the file system cache, an area of physical memory that stores recently used data as long as possible to permit access to the data without having to read from the disk. Because applications typically use the cache, the cache is monitored as an indicator of application input/output (I/O) operations. When memory is plentiful, the cache can grow, but when memory is scarce, the cache can become too small to be effective." ::= { advanced 7 } cacheAsyncCopyReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Async Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer. The application will regain control immediately even if the disk must be accessed to retrieve the page." ::= { cache 1 } cacheAsyncDataMapsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Async Data Maps/sec is the frequency that an application using a file system, such as NTFS, to map a page of a file into the file system cache to read the page, and does not wait for the page to be retrieved if it is not in main memory." ::= { cache 2 } cacheAsyncFastReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Async Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache. Normally, file I/O requests will invoke the appropriate file system to retrieve data from a file, but this path permits data to be retrieved from the cache directly (without file system involvement) if the data is in the cache. Even if the data is not in the cache, one invocation of the file system is avoided. If the data is not in the cache, the request (application program call) will not wait until the data has been retrieved from disk, but will get control immediately." ::= { cache 3 } cacheAsyncMDLReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Async MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the pages. The MDL contains the physical address of each page in the transfer, thus permitting Direct Memory Access (DMA) of the pages. If the accessed page(s) are not in main memory, the calling application program will not wait for the pages to fault in from disk." ::= { cache 4 } cacheAsyncPinReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Async Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk. Pages read in this fashion are pinned in memory at the completion of the read. The file system will regain control immediately even if the disk must be accessed to retrieve the page. While pinned, a page's physical address will not be altered." ::= { cache 5 } cacheCopyReadHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Copy Read Hits is the percentage of cache copy read requests that hit the cache, that is, they did not require a disk read in order to provide access to the page in the cache. A copy read is a file read operation that is satisfied by a memory copy from a page in the cache to the application's buffer. The LAN Redirector uses this method for retrieving information from the cache, as does the LAN Server for small transfers. This is a method used by the disk file systems as well." ::= { cache 6 } cacheCopyReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer. The LAN Redirector uses this method for retrieving information from the file system cache, as does the LAN Server for small transfers. This is a method used by the disk file systems as well." ::= { cache 7 } cacheDataFlushPagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data Flush Pages/sec is the number of pages the file system cache has flushed to disk as a result of a request to flush or to satisfy a write-through file write request. More than one page can be transferred on each flush operation." ::= { cache 8 } cacheDataFlushesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data Flushes/sec is the rate at which the file system cache has flushed its contents to disk as the result of a request to flush or to satisfy a write-through file write request. More than one page can be transferred on each flush operation." ::= { cache 9 } cacheDataMapHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data Map Hits is the percentage of data maps in the file system cache that could be resolved without having to retrieve a page from the disk, because the page was already in physical memory." ::= { cache 10 } cacheDataMapPinsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data Map Pins/sec is the frequency of data maps in the file system cache that resulted in pinning a page in main memory, an action usually preparatory to writing to the file on disk. While pinned, a page's physical address in main memory and virtual address in the file system cache will not be altered." ::= { cache 11 } cacheDataMapsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Data Maps/sec is the frequency that a file system such as NTFS, maps a page of a file into the file system cache to read the page." ::= { cache 12 } cacheFastReadNotPossiblesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fast Read Not Possibles/sec is the frequency of attempts by an Application Program Interface (API) function call to bypass the file system to get to data in the file system cache that could not be honored without invoking the file system." ::= { cache 13 } cacheFastReadResourceMissPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fast Read Resource Misses/sec is the frequency of cache misses necessitated by the lack of available resources to satisfy the request." ::= { cache 14 } cacheFastReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache. Normally, file I/O requests invoke the appropriate file system to retrieve data from a file, but this path permits direct retrieval of data from the cache without file system involvement if the data is in the cache. Even if the data is not in the cache, one invocation of the file system is avoided." ::= { cache 15 } cacheLazyWriteFlushesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lazy Write Flushes/sec is the rate at which the Lazy Writer thread has written to disk. Lazy Writing is the process of updating the disk after the page has been changed in memory, so that the application that changed the file does not have to wait for the disk write to be complete before proceeding. More than one page can be transferred by each write operation." ::= { cache 16 } cacheLazyWritePagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lazy Write Pages/sec is the rate at which the Lazy Writer thread has written to disk. Lazy Writing is the process of updating the disk after the page has been changed in memory, so that the application that changed the file does not have to wait for the disk write to be complete before proceeding. More than one page can be transferred on a single disk write operation." ::= { cache 17 } cacheMDLReadHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "MDL Read Hits is the percentage of Memory Descriptor List (MDL) Read requests to the file system cache that hit the cache, i.e., did not require disk accesses in order to provide memory access to the page(s) in the cache." ::= { cache 18 } cacheMDLReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the data. The MDL contains the physical address of each page involved in the transfer, and thus can employ a hardware Direct Memory Access (DMA) device to effect the copy. The LAN Server uses this method for large transfers out of the server." ::= { cache 19 } cachePinReadHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pin Read Hits is the percentage of pin read requests that hit the file system cache, i.e., did not require a disk read in order to provide access to the page in the file system cache. While pinned, a page's physical address in the file system cache will not be altered. The LAN Redirector uses this method for retrieving data from the cache, as does the LAN Server for small transfers. This is usually the method used by the disk file systems as well." ::= { cache 20 } cachePinReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk. Pages read in this fashion are pinned in memory at the completion of the read. While pinned, a page's physical address in the file system cache will not be altered." ::= { cache 21 } cacheReadAheadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Aheads/sec is the frequency of reads from the file system cache in which the Cache detects sequential access to a file. The read aheads permit the data to be transferred in larger blocks than those being requested by the application, reducing the overhead per access." ::= { cache 22 } cacheSyncCopyReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sync Copy Reads/sec is the frequency of reads from pages of the file system cache that involve a memory copy of the data from the cache to the application's buffer. The file system will not regain control until the copy operation is complete, even if the disk must be accessed to retrieve the page." ::= { cache 23 } cacheSyncDataMapsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sync Data Maps/sec counts the frequency that a file system, such as NTFS, maps a page of a file into the file system cache to read the page, and wishes to wait for the page to be retrieved if it is not in main memory." ::= { cache 24 } cacheSyncFastReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sync Fast Reads/sec is the frequency of reads from the file system cache that bypass the installed file system and retrieve the data directly from the cache. Normally, file I/O requests invoke the appropriate file system to retrieve data from a file, but this path permits direct retrieval of data from the cache without file system involvement if the data is in the cache. Even if the data is not in the cache, one invocation of the file system is avoided. If the data is not in the cache, the request (application program call) will wait until the data has been retrieved from disk." ::= { cache 25 } cacheSyncMDLReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sync MDL Reads/sec is the frequency of reads from the file system cache that use a Memory Descriptor List (MDL) to access the pages. The MDL contains the physical address of each page in the transfer, thus permitting Direct Memory Access (DMA) of the pages. If the accessed page(s) are not in main memory, the caller will wait for the pages to fault in from the disk." ::= { cache 26 } cacheSyncPinReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sync Pin Reads/sec is the frequency of reading data into the file system cache preparatory to writing the data back to disk. Pages read in this fashion are pinned in memory at the completion of the read. The file system will not regain control until the page is pinned in the file system cache, in particular if the disk must be accessed to retrieve the page. While pinned, a page's physical address in the file system cache will not be altered." ::= { cache 27 } dhcpServer OBJECT-IDENTITY STATUS current DESCRIPTION "The DHCP Server performance object provides counters for monitoring DHCP service activity. The DHCP service enables the server to perform as a DHCP server and configure DHCP-enabled client computers on your network as described in the DHCP standard. This object is available when the service is running. The following table describes the counters provided by the DHCP Server object and how to interpret the values when monitoring DHCP service performance." ::= { advanced 8 } dhcpSrvAcksPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Acks sent by the DHCP server." ::= { dhcpServer 1 } dhcpSrvActiveQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of packets in the processing queue of the DHCP server." ::= { dhcpServer 2 } dhcpSrvConflictCheckQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Number of packets in the DHCP server queue waiting on conflict detection (ping)." ::= { dhcpServer 3 } dhcpSrvDeclinesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Declines received by the DHCP server." ::= { dhcpServer 4 } dhcpSrvDiscoversPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Discovers received by the DHCP server." ::= { dhcpServer 5 } dhcpSrvDuplicatesDroppedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duplicates Dropped/sec is the rate at which the DHCP server received duplicate packets." ::= { dhcpServer 6 } dhcpSrvInformsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Informs received by the DHCP server." ::= { dhcpServer 7 } dhcpSrvMillisecondsPerPacketAvg OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average time per packet taken by the DHCP server to send a response." ::= { dhcpServer 8 } dhcpSrvNacksPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Nacks sent by the DHCP server." ::= { dhcpServer 9 } dhcpSrvOffersPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Offers sent out by the DHCP server." ::= { dhcpServer 10 } dhcpSrvPacketsExpiredPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Expired/sec is the rate at which packets get expired in the DHCP server message queue." ::= { dhcpServer 11 } dhcpSrvPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which packets are received by the DHCP server." ::= { dhcpServer 12 } dhcpSrvReleasesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Releases received by the DHCP server." ::= { dhcpServer 13 } dhcpSrvRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of DHCP Requests received by the DHCP server." ::= { dhcpServer 14 } distributeTransactionCoordinator OBJECT-IDENTITY STATUS current DESCRIPTION "The Distributed Transaction Coordinator performance object provides statistics about Distributed Transaction Coordinator (MS DTC), part of Component Services (formerly known as Transaction Server) that coordinates external, or two-phase transactions. Among other things, MS DTC is used to coordinate two-phase transactions by Message Queuing." ::= { advanced 9 } dtcAbortedTransactions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of aborted transactions" ::= { distributeTransactionCoordinator 1 } dtcAbortedTransactionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transactions aborted per second" ::= { distributeTransactionCoordinator 2 } dtcActiveTransactions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of currently active transactions" ::= { distributeTransactionCoordinator 3 } dtcActiveTransactionsMaximum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of transactions ever concurrently active" ::= { distributeTransactionCoordinator 4 } dtcCommittedTransactions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of committed transactions" ::= { distributeTransactionCoordinator 5 } dtcCommittedTransactionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transactions committed per second" ::= { distributeTransactionCoordinator 6 } dtcForceAbortedTransactions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transactions aborted by the system administrator" ::= { distributeTransactionCoordinator 7 } dtcForceCommittedTransactions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transactions committed by the system administrator" ::= { distributeTransactionCoordinator 8 } dtcInDoubtTransactions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of in doubt transactions" ::= { distributeTransactionCoordinator 9 } dtcResponseTimeAverage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time delta between transaction begin and commit" ::= { distributeTransactionCoordinator 10 } dtcResponseTimeMaximum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum time delta between transaction begin and commit" ::= { distributeTransactionCoordinator 11 } dtcResponseTimeMinimum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum time delta between transaction begin and commit" ::= { distributeTransactionCoordinator 12 } dtcTransactionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transactions performed per second" ::= { distributeTransactionCoordinator 13 } dns OBJECT-IDENTITY STATUS current DESCRIPTION "The DNS performance object provides counters for monitoring various areas of performance of the DNS service that enables client computers on your network to register and resolve DNS domain names. These names are used to find and access resources offered by other computers on your network or other networks, such as the Internet. The data reported by the DNS object includes the number of overall queries and responses processed by a DNS server, the number of DNS queries and responses processed using either the User Datagram Protocol (UDP) or the Transmission Control Protocol (TCP), the number of queries and responses that used recursion to look up and fully resolve DNS names on behalf of requesting clients, and the number of queries and responses made to servers using the WINS lookup integration features of the DNS service." ::= { advanced 10 } dnsAXFRRequestReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AXFR Request Received is the total number of full zone transfer requests received by the master DNS server." ::= { dns 1 } dnsAXFRRequestSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AXFR Request Sent is the total number of full zone transfer requests sent by the secondary DNS server." ::= { dns 2 } dnsAXFRResponseReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AXFR Response Received is the total number of full zone transfer responses received by the secondary DNS server." ::= { dns 3 } dnsAXFRSuccessReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AXFR Success Received is the total number of successful full zone transfers received by the secondary DNS server." ::= { dns 4 } dnsAXFRSuccessSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AXFR Success Sent is the total number of successful full zone transfers of the master DNS server." ::= { dns 5 } dnsCachingMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Caching Memory is the total caching memory used by DNS server." ::= { dns 6 } dnsDatabaseNodeMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Node Memory is the total database node memory used by DNS server." ::= { dns 7 } dnsDynamicUpdateNoOperation OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update NoOperation is the total number of No-operation/Empty dynamic update requests received by the DNS server." ::= { dns 8 } dnsDynamicUpdateNoOpPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update NoOperation/sec is the average number of No-operation/Empty dynamic update requests received by the DNS server in each second." ::= { dns 9 } dnsDynamicUpdateQueued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update Queued is the total number of dynamic updates queued by the DNS server." ::= { dns 10 } dnsDynamicUpdateReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update Received is the total number of dynamic update requests received by the DNS server." ::= { dns 11 } dnsDynamicUpdateReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update Received/sec is the average number of dynamic update requests received by the DNS server in each second." ::= { dns 12 } dnsDynamicUpdateRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update Rejected is the total number of dynamic updates rejected by the DNS server." ::= { dns 13 } dnsDynamicUpdateTimeOuts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update TimeOuts is the total number of dynamic update timeouts of the DNS server." ::= { dns 14 } dnsDynamicUpdateWriteToDB OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update Written to Database is the total number of dynamic updates written to the database by the DNS server." ::= { dns 15 } dnsDynamicUpdateWriteToDBPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dynamic Update Written to Database/sec is the average number of dynamic updates written to the database by the DNS server in each second." ::= { dns 16 } dnsIXFRRequestReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IXFR Request Received is the total number of incremental zone transfer requests received by the master DNS server." ::= { dns 17 } dnsIXFRRequestSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IXFR Request Sent is the total number of incremental zone transfer requests sent by the secondary DNS server." ::= { dns 18 } dnsIXFRResponseReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IXFR Response Received is the total number of incrementalzone transfer responses received by the secondary DNS server." ::= { dns 19 } dnsIXFRSuccessReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IXFR Success Received is the total number of successful incremental zone transfers received by the secondary DNS server." ::= { dns 20 } dnsIXFRSuccessSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IXFR Success Sent is the total number of successful incremental zone transfers of the master DNS server." ::= { dns 21 } dnsIXFRTCPSuccessReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IXFR TCP Success Received is the total number of successful TCP incremental zone transfers received by the secondary DNS server." ::= { dns 22 } dnsIXFRUDPSuccessReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IXFR UDP Success Received is the total number of successful UDP incremental zone transfers received by the secondary DNS server." ::= { dns 23 } dnsNbstatMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Nbstat Memory is the total Nbstat memory used by DNS server." ::= { dns 24 } dnsNotifyReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Notify Received is the total number of notifies received by the secondary DNS server." ::= { dns 25 } dnsNotifySent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Notify Sent is the total number of notifies sent by the master DNS server." ::= { dns 26 } dnsRecordFlowMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Record Flow Memory is the total record flow memory used by DNS server." ::= { dns 27 } dnsRecursiveQueries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Recursive Queries is the total number of recursive queries received by DNS server." ::= { dns 28 } dnsRecursiveQueriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Recursive Queries/sec is the average number of recursive queries received by DNS server in each sencond." ::= { dns 29 } dnsRecursiveQueryFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Recursive Query Failure is the total number of recursive query failures." ::= { dns 30 } dnsRecursiveQueryFailurePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Recursive Query Failure/sec is the average number of recursive query failures in each second." ::= { dns 31 } dnsRecursiveSendTimeOuts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Recursive TimeOuts is the total number of recursive query sending timeouts." ::= { dns 32 } dnsRecursiveTimeOutPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Recursive TimeOut/sec is the average number of recursive query sending timeouts in each second." ::= { dns 33 } dnsSecureUpdateFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Secure Update Failure is the total number of secure updates failed of the DNS server." ::= { dns 34 } dnsSecureUpdateReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Secure Update Received is the total number of secure update requests received by the DNS server." ::= { dns 35 } dnsSecureUpdateReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Secure Update Received/sec is the average number of secure update requests received by the DNS server in each second." ::= { dns 36 } dnsTCPMessageMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP Message Memory is the total TCP message memory used by DNS server." ::= { dns 37 } dnsTCPQueryReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP Query Received is the total number of TCP queries received by DNS server." ::= { dns 38 } dnsTCPQueryReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP Query Received/sec is the average number of TCP queries received by DNS server in each second." ::= { dns 39 } dnsTCPResponseSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP Response Sent is the total number of TCP reponses sent by DNS server." ::= { dns 40 } dnsTCPResponseSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "TCP Response Sent/sec is the average number of TCP reponses sent by DNS server in each second." ::= { dns 41 } dnsTotalQueryReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Query Received is the total number of queries received by DNS server." ::= { dns 42 } dnsTotalQueryReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Query Received/sec is the average number of queries received by DNS server in each second." ::= { dns 43 } dnsTotalResponseSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Response Sent is the total number of reponses sent by DNS server." ::= { dns 44 } dnsTotalResponseSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Response Sent/sec is the average number of reponses sent by DNS server in each second." ::= { dns 45 } dnsUDPMessageMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP Message Memory is the total UDP message memory used by DNS server." ::= { dns 46 } dnsUDPQueryReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP Query Received is the total number of UDP queries received by DNS server." ::= { dns 47 } dnsUDPQueryReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP Query Received/sec is the average number of UDP queries received by DNS server in each second." ::= { dns 48 } dnsUDPResponseSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP Response Sent is the total number of UDP reponses sent by DNS server." ::= { dns 49 } dnsUDPResponseSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "UDP Response Sent/sec is the average number of UDP reponses sent by DNS server in each second." ::= { dns 50 } dnsWINSLookupReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Lookup Received is the total number of WINS lookup requests received by the server." ::= { dns 51 } dnsWINSLookupReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Lookup Received/sec is the average number of WINS lookup requests received by the server in each second." ::= { dns 52 } dnsWINSResponseSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Response Sent is the total number of WINS lookup responses sent by the server." ::= { dns 53 } dnsWINSResponseSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Response Sent/sec is the average number of WINS lookup responses sent by the server in each second." ::= { dns 54 } dnsWINSReverseLookupReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Reverse Lookup Received is the total number of WINS reverse lookup requests received by the server." ::= { dns 55 } dnsWINSReverseLookupRcvPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Reverse Lookup Received/sec is the average number of WINS reverse lookup requests received by the server in each second." ::= { dns 56 } dnsWINSReverseResponseSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Reverse Response Sent is the total number of WINS Reverse lookup responses sent by the server." ::= { dns 57 } dnsWINSReverseResponseSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "WINS Reverse Response Sent/sec is the average number of WINS Reverse lookup responses sent by the server in each second." ::= { dns 58 } dnsZoneTransferFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Zone Transfer Failure is the total number of failed zone transfers of the master DNS server." ::= { dns 59 } dnsZoneTransferRequestReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Zone Transfer Request Received is the total number of zone transfer requests received by the master DNS server." ::= { dns 60 } dnsZoneTransferSOARequestSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Zone Transfer SOA Request Sent is the total number of zone transfer SOA requests sent by the secondary DNS server." ::= { dns 61 } dnsZoneTransferSuccess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Zone Transfer Success is the total number of successful zone transfers of the master DNS server." ::= { dns 62 } dotNETCLRDataTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Data category includes counters that provide information about the exceptions thrown by an application." ::= { advanced 11 } dotNETCLRDataEntry OBJECT-TYPE SYNTAX DotNETCLRDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Data' object." INDEX { ncdInstance } ::= { dotNETCLRDataTable 1 } DotNETCLRDataEntry ::= SEQUENCE { ncdInstance InstanceName, ncdSQLClntCurNumConnPools Gauge32, ncdSQLClntCurNumConns Gauge32, ncdSQLClntCurNumPoolConns Gauge32, ncdSQLClntPeakNumPoolConns Gauge32, ncdSQLClntTotalNumFailedCommands Gauge32, ncdSQLClntTotalNumFailedConnects Gauge32 } ncdInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRDataEntry 1 } ncdSQLClntCurNumConnPools OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of pools associated with the process." ::= { dotNETCLRDataEntry 2 } ncdSQLClntCurNumConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of connections, pooled or not." ::= { dotNETCLRDataEntry 3 } ncdSQLClntCurNumPoolConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of connections in all pools associated with the process." ::= { dotNETCLRDataEntry 4 } ncdSQLClntPeakNumPoolConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of connections in all pools since the process started." ::= { dotNETCLRDataEntry 5 } ncdSQLClntTotalNumFailedCommands OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of command executes that have failed for any reason." ::= { dotNETCLRDataEntry 6 } ncdSQLClntTotalNumFailedConnects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connection open attempts that have failed for any reason." ::= { dotNETCLRDataEntry 7 } dotNETCLRExceptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRExceptionsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Exceptions category includes counters that provide information about the exceptions thrown by an application." ::= { advanced 12 } dotNETCLRExceptionsEntry OBJECT-TYPE SYNTAX DotNETCLRExceptionsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Exceptions' object." INDEX { nceInstance } ::= { dotNETCLRExceptionsTable 1 } DotNETCLRExceptionsEntry ::= SEQUENCE { nceInstance InstanceName, nceNumOfExcepsThrown Gauge32, nceNumOfExcepsThrownPerSec Gauge32, nceNumOfFiltersPerSec Gauge32, nceNumOfFinallysPerSec Gauge32, nceThrowToCatchDepthPerSec Gauge32 } nceInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRExceptionsEntry 1 } nceNumOfExcepsThrown OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of exceptions thrown since the start of the application. These include both .NET exceptions and unmanaged exceptions that get converted into .NET exceptions e.g. null pointer reference exception in unmanaged code would get re-thrown in managed code as a .NET System.NullReferenceException; this counter includes both handled and unhandled exceptions. Exceptions that are re-thrown would get counted again. Exceptions should only occur in rare situations and not in the normal control flow of the program." ::= { dotNETCLRExceptionsEntry 2 } nceNumOfExcepsThrownPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of exceptions thrown per second. These include both .NET exceptions and unmanaged exceptions that get converted into .NET exceptions e.g. null pointer reference exception in unmanaged code would get re-thrown in managed code as a .NET System.NullReferenceException; this counter includes both handled and unhandled exceptions. Exceptions should only occur in rare situations and not in the normal control flow of the program; this counter was designed as an indicator of potential performance problems due to large (>100s) rate of exceptions thrown. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRExceptionsEntry 3 } nceNumOfFiltersPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of .NET exception filters executed per second. An exception filter evaluates whether an exception should be handled or not. This counter tracks the rate of exception filters evaluated; irrespective of whether the exception was handled or not. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRExceptionsEntry 4 } nceNumOfFinallysPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of finally blocks executed per second. A finally block is guaranteed to be executed regardless of how the try block was exited. Only the finally blocks that are executed for an exception are counted; finally blocks on normal code paths are not counted by this counter. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRExceptionsEntry 5 } nceThrowToCatchDepthPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of stack frames traversed from the frame that threw the .NET exception to the frame that handled the exception per second. This counter resets to 0 when an exception handler is entered; so nested exceptions would show the handler to handler stack depth. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRExceptionsEntry 6 } dotNETCLRInteropTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRInteropEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Interop category includes counters that provide information about an application's interaction with COM components, COM+ services, and external type libraries." ::= { advanced 13 } dotNETCLRInteropEntry OBJECT-TYPE SYNTAX DotNETCLRInteropEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Interop' object." INDEX { nciInstance } ::= { dotNETCLRInteropTable 1 } DotNETCLRInteropEntry ::= SEQUENCE { nciInstance InstanceName, nciNumOfCCWs Gauge32, nciNumOfStubs Gauge32, nciNumOfTLBExportsPerSec Gauge32, nciNumOfTLBImportsPerSec Gauge32, nciNumOfMarshalling Gauge32 } nciInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRInteropEntry 1 } nciNumOfCCWs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of Com-Callable-Wrappers (CCWs). A CCW is a proxy for the .NET managed object being referenced from unmanaged COM client(s). This counter was designed to indicate the number of managed objects being referenced by unmanaged COM code." ::= { dotNETCLRInteropEntry 2 } nciNumOfStubs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of stubs created by the CLR. Stubs are responsible for marshalling arguments and return values from managed to unmanaged code and vice versa; during a COM Interop call or PInvoke call." ::= { dotNETCLRInteropEntry 3 } nciNumOfTLBExportsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reserved for future use." ::= { dotNETCLRInteropEntry 4 } nciNumOfTLBImportsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reserved for future use." ::= { dotNETCLRInteropEntry 5 } nciNumOfMarshalling OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of times arguments and return values have been marshaled from managed to unmanaged code and vice versa since the start of the application. This counter is not incremented if the stubs are inlined. (Stubs are responsible for marshalling arguments and return values). Stubs usually get inlined if the marshalling overhead is small." ::= { dotNETCLRInteropEntry 6 } dotNETCLRJitTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRJitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR JIT category includes counters that provide information about code that has been JIT-compiled." ::= { advanced 14 } dotNETCLRJitEntry OBJECT-TYPE SYNTAX DotNETCLRJitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Jit' object." INDEX { ncjInstance } ::= { dotNETCLRJitTable 1 } DotNETCLRJitEntry ::= SEQUENCE { ncjInstance InstanceName, ncjNumOfILBytesJitted Gauge32, ncjNumOfMethodsJitted Gauge32, ncjPercentTimeInJit Gauge32, ncjILBytesJittedPerSec Gauge32, ncjStandardJitFailures Gauge32, ncjTotalNumOfILBytesJitted Gauge32 } ncjInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRJitEntry 1 } ncjNumOfILBytesJitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total IL bytes jitted since the start of the application. This counter is exactly equivalent to the 'Total # of IL Bytes Jitted' counter." ::= { dotNETCLRJitEntry 2 } ncjNumOfMethodsJitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of methods compiled Just-In-Time (JIT) by the CLR JIT compiler since the start of the application. This counter does not include the pre-jitted methods." ::= { dotNETCLRJitEntry 3 } ncjPercentTimeInJit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the percentage of elapsed time spent in JIT compilation since the last JIT compilation phase. This counter is updated at the end of every JIT compilation phase. A JIT compilation phase is the phase when a method and its dependencies are being compiled." ::= { dotNETCLRJitEntry 4 } ncjILBytesJittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the rate at which IL bytes are jitted per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRJitEntry 5 } ncjStandardJitFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the peak number of methods the JIT compiler has failed to JIT since the start of the application. This failure can occur if the IL cannot be verified or if there was an internal error in the JIT compiler." ::= { dotNETCLRJitEntry 6 } ncjTotalNumOfILBytesJitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total IL bytes jitted since the start of the application. This counter is exactly equivalent to the '# of IL Bytes Jitted' counter." ::= { dotNETCLRJitEntry 7 } dotNETCLRLoadingTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRLoadingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Loading category includes counters that provide information about assemblies, classes, and application domains that are loaded." ::= { advanced 15 } dotNETCLRLoadingEntry OBJECT-TYPE SYNTAX DotNETCLRLoadingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Loading' object." INDEX { nclInstance } ::= { dotNETCLRLoadingTable 1 } DotNETCLRLoadingEntry ::= SEQUENCE { nclInstance InstanceName, nclPercentTimeLoading Gauge32, nclAssemblySearchLength Gauge32, nclBytesInLoaderHeap Gauge32, nclCurrentAssemblies Gauge32, nclCurrentClassesLoaded Gauge32, nclCurrentAppdomains Gauge32, nclRateOfAssemblies Gauge32, nclRateOfClassesLoaded Gauge32, nclRateOfLoadFailures Gauge32, nclRateOfAppdomains Gauge32, nclRateOfAppdomainsUnloaded Gauge32, nclTotalNumOfLoadFailures Gauge32, nclTotalAppdomains Gauge32, nclTotalAssemblies Gauge32, nclTotalClassesLoaded Gauge32, nclTotalAppdomainsUnloaded Gauge32 } nclInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRLoadingEntry 1 } nclPercentTimeLoading OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reserved for future use." ::= { dotNETCLRLoadingEntry 2 } nclAssemblySearchLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reserved for future use." ::= { dotNETCLRLoadingEntry 3 } nclBytesInLoaderHeap OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current size (in bytes) of the memory committed by the class loader across all AppDomains. (Committed memory is the physical memory for which space has been reserved on the disk paging file.)" ::= { dotNETCLRLoadingEntry 4 } nclCurrentAssemblies OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of Assemblies loaded across all AppDomains in this application. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain." ::= { dotNETCLRLoadingEntry 5 } nclCurrentClassesLoaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of classes loaded in all Assemblies." ::= { dotNETCLRLoadingEntry 6 } nclCurrentAppdomains OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of AppDomains loaded in this application. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process." ::= { dotNETCLRLoadingEntry 7 } nclRateOfAssemblies OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of Assemblies loaded across all AppDomains per second. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRLoadingEntry 8 } nclRateOfClassesLoaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of classes loaded per second in all Assemblies. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRLoadingEntry 9 } nclRateOfLoadFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of classes that failed to load per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval. These load failures could be due to many reasons like inadequate security or illegal format. Full details can be found in the profiling services help." ::= { dotNETCLRLoadingEntry 10 } nclRateOfAppdomains OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of AppDomains loaded per second. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRLoadingEntry 11 } nclRateOfAppdomainsUnloaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of AppDomains unloaded per second. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRLoadingEntry 12 } nclTotalNumOfLoadFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the peak number of classes that have failed to load since the start of the application. These load failures could be due to many reasons like inadequate security or illegal format. Full details can be found in the profiling services help." ::= { dotNETCLRLoadingEntry 13 } nclTotalAppdomains OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the peak number of AppDomains loaded since the start of this application. AppDomains (application domains) provide a secure and versatile unit of processing that the CLR can use to provide isolation between applications running in the same process." ::= { dotNETCLRLoadingEntry 14 } nclTotalAssemblies OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of Assemblies loaded since the start of this application. If the Assembly is loaded as domain-neutral from multiple AppDomains then this counter is incremented once only. Assemblies can be loaded as domain-neutral when their code can be shared by all AppDomains or they can be loaded as domain-specific when their code is private to the AppDomain." ::= { dotNETCLRLoadingEntry 15 } nclTotalClassesLoaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the cumulative number of classes loaded in all Assemblies since the start of this application." ::= { dotNETCLRLoadingEntry 16 } nclTotalAppdomainsUnloaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of AppDomains unloaded since the start of the application. If an AppDomain is loaded and unloaded multiple times this counter would count each of those unloads as separate." ::= { dotNETCLRLoadingEntry 17 } dotNETCLRLocksAndThreadsTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRLocksAndThreadsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR LocksAndThreads category includes counters that provide information about managed locks and threads that an application uses." ::= { advanced 16 } dotNETCLRLocksAndThreadsEntry OBJECT-TYPE SYNTAX DotNETCLRLocksAndThreadsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR LocksAndThreads' object." INDEX { ncltInstance } ::= { dotNETCLRLocksAndThreadsTable 1 } DotNETCLRLocksAndThreadsEntry ::= SEQUENCE { ncltInstance InstanceName, ncltNumOfCurrentLogicalThread Gauge32, ncltNumOfCurrentPhysicalThread Gauge32, ncltNumOfCurrentRecognizedThread Gauge32, ncltNumOfTotalRecognizedThread Gauge32, ncltContentionRatePerSec Gauge32, ncltCurrentQueueLength Gauge32, ncltQueueLengthPerSec Gauge32, ncltQueueLengthPeak Gauge32, ncltTotalNumOfContentions Gauge32, ncltRateOfRecognizedThreadPerSec Gauge32 } ncltInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRLocksAndThreadsEntry 1 } ncltNumOfCurrentLogicalThread OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of current .NET thread objects in the application. A .NET thread object is created either by new System.Threading.Thread or when an unmanaged thread enters the managed environment. This counters maintains the count of both running and stopped threads. This counter is not an average over time; it just displays the last observed value." ::= { dotNETCLRLocksAndThreadsEntry 2 } ncltNumOfCurrentPhysicalThread OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of native OS threads created and owned by the CLR to act as underlying threads for .NET thread objects. This counters value does not include the threads used by the CLR in its internal operations; it is a subset of the threads in the OS process." ::= { dotNETCLRLocksAndThreadsEntry 3 } ncltNumOfCurrentRecognizedThread OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of threads that are currently recognized by the CLR; they have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice." ::= { dotNETCLRLocksAndThreadsEntry 4 } ncltNumOfTotalRecognizedThread OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of threads that have been recognized by the CLR since the start of this application; these threads have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice." ::= { dotNETCLRLocksAndThreadsEntry 5 } ncltContentionRatePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate at which threads in the runtime attempt to acquire a managed lock unsuccessfully. Managed locks can be acquired in many ways; by the 'lock' statement in C# or by calling System.Monitor.Enter or by using MethodImplOptions.Synchronized custom attribute." ::= { dotNETCLRLocksAndThreadsEntry 6 } ncltCurrentQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of threads currently waiting to acquire some managed lock in the application. This counter is not an average over time; it displays the last observed value." ::= { dotNETCLRLocksAndThreadsEntry 7 } ncltQueueLengthPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of threads per second waiting to acquire some lock in the application. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRLocksAndThreadsEntry 8 } ncltQueueLengthPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of threads that waited to acquire some managed lock since the start of the application." ::= { dotNETCLRLocksAndThreadsEntry 9 } ncltTotalNumOfContentions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of times threads in the CLR have attempted to acquire a managed lock unsuccessfully. Managed locks can be acquired in many ways; by the 'lock' statement in C# or by calling System.Monitor.Enter or by using MethodImplOptions.Synchronized custom attribute." ::= { dotNETCLRLocksAndThreadsEntry 10 } ncltRateOfRecognizedThreadPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of threads per second that have been recognized by the CLR; these threads have a corresponding .NET thread object associated with them. These threads are not created by the CLR; they are created outside the CLR but have since run inside the CLR at least once. Only unique threads are tracked; threads with same thread ID re-entering the CLR or recreated after thread exit are not counted twice. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRLocksAndThreadsEntry 11 } dotNETCLRMemoryTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRMemoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Memory category includes counters that provide information about the garbage collector." ::= { advanced 17 } dotNETCLRMemoryEntry OBJECT-TYPE SYNTAX DotNETCLRMemoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Memory' object." INDEX { ncmInstance } ::= { dotNETCLRMemoryTable 1 } DotNETCLRMemoryEntry ::= SEQUENCE { ncmInstance InstanceName, ncmNumBytesInAllHeaps Gauge32, ncmNumGCHandles Gauge32, ncmNumGen0Collections Gauge32, ncmNumGen1Collections Gauge32, ncmNumGen2Collections Gauge32, ncmNumInducedGC Gauge32, ncmNumTotalCommittedBytes Gauge32, ncmNumTotalReservedBytes Gauge32, ncmNumOfPinnedObjects Gauge32, ncmNumOfSinkBlocksInUse Gauge32, ncmPercentTimeInGC Gauge32, ncmAllocatedBytesPerSec Gauge32, ncmFinalizationSurvivors Gauge32, ncmGen0PromotedBytesPerSec Gauge32, ncmGen0HeapSize Gauge32, ncmGen1PromotedBytesPerSec Gauge32, ncmGen1HeapSize Gauge32, ncmGen2HeapSize Gauge32, ncmLargeObjectHeapSize Gauge32, ncmPromotFinalizationMemoryGen0 Gauge32, ncmPromotFinalizationMemoryGen1 Gauge32, ncmPromotedMemoryFromGen0 Gauge32, ncmPromotedMemoryFromGen1 Gauge32, ncmProcessID Gauge32 } ncmInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRMemoryEntry 1 } ncmNumBytesInAllHeaps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is the sum of four other counters; Gen 0 Heap Size; Gen 1 Heap Size; Gen 2 Heap Size and the Large Object Heap Size. This counter indicates the current memory allocated in bytes on the GC Heaps." ::= { dotNETCLRMemoryEntry 2 } ncmNumGCHandles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of GC Handles in use. GCHandles are handles to resources external to the CLR and the managed environment. Handles occupy small amounts of memory in the GCHeap but potentially expensive unmanaged resources." ::= { dotNETCLRMemoryEntry 3 } ncmNumGen0Collections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of times the generation 0 objects (youngest; most recently allocated) are garbage collected (Gen 0 GC) since the start of the application. Gen 0 GC occurs when the available memory in generation 0 is not sufficient to satisfy an allocation request. This counter is incremented at the end of a Gen 0 GC. Higher generation GCs include all lower generation GCs. This counter is explicitly incremented when a higher generation (Gen 1 or Gen 2) GC occurs. _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value." ::= { dotNETCLRMemoryEntry 4 } ncmNumGen1Collections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of times the generation 1 objects are garbage collected since the start of the application. The counter is incremented at the end of a Gen 1 GC. Higher generation GCs include all lower generation GCs. This counter is explicitly incremented when a higher generation (Gen 2) GC occurs. _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value." ::= { dotNETCLRMemoryEntry 5 } ncmNumGen2Collections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of times the generation 2 objects (older) are garbage collected since the start of the application. The counter is incremented at the end of a Gen 2 GC (also called full GC). _Global_ counter value is not accurate and should be ignored. This counter displays the last observed value." ::= { dotNETCLRMemoryEntry 6 } ncmNumInducedGC OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the peak number of times a garbage collection was performed because of an explicit call to GC.Collect. Its a good practice to let the GC tune the frequency of its collections." ::= { dotNETCLRMemoryEntry 7 } ncmNumTotalCommittedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the amount of virtual memory (in bytes) currently committed by the Garbage Collector. (Committed memory is the physical memory for which space has been reserved on the disk paging file)." ::= { dotNETCLRMemoryEntry 8 } ncmNumTotalReservedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the amount of virtual memory (in bytes) currently reserved by the Garbage Collector. (Reserved memory is the virtual memory space reserved for the application but no disk or main memory pages have been used.)" ::= { dotNETCLRMemoryEntry 9 } ncmNumOfPinnedObjects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of pinned objects encountered in the last GC. This counter tracks the pinned objects only in the heaps that were garbage collected e.g. a Gen 0 GC would cause enumeration of pinned objects in the generation 0 heap only. A pinned object is one that the Garbage Collector cannot move in memory." ::= { dotNETCLRMemoryEntry 10 } ncmNumOfSinkBlocksInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of sync blocks in use. Sync blocks are per-object data structures allocated for storing synchronization information. Sync blocks hold weak references to managed objects and need to be scanned by the Garbage Collector. Sync blocks are not limited to storing synchronization information and can also store COM interop metadata. This counter was designed to indicate performance problems with heavy use of synchronization primitives." ::= { dotNETCLRMemoryEntry 11 } ncmPercentTimeInGC OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Time in GC is the percentage of elapsed time that was spent in performing a garbage collection (GC) since the last GC cycle. This counter is usually an indicator of the work done by the Garbage Collector on behalf of the application to collect and compact memory. This counter is updated only at the end of every GC and the counter value reflects the last observed value; its not an average." ::= { dotNETCLRMemoryEntry 12 } ncmAllocatedBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the rate of bytes per second allocated on the GC Heap. This counter is updated at the end of every GC; not at each allocation. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRMemoryEntry 13 } ncmFinalizationSurvivors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of garbage collected objects that survive a collection because they are waiting to be finalized. If these objects hold references to other objects then those objects also survive but are not counted by this counter; the 'Promoted Finalization-Memory from Gen 0' and 'Promoted Finalization-Memory from Gen 1' counters represent all the memory that survived due to finalization. This counter is not a cumulative counter; its updated at the end of every GC with count of the survivors during that particular GC only. This counter was designed to indicate the extra overhead that the application might incur because of finalization." ::= { dotNETCLRMemoryEntry 14 } ncmGen0PromotedBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the bytes per second that are promoted from generation 0 (youngest) to generation 1; objects that are promoted just because they are waiting to be finalized are not included in this counter. Memory is promoted when it survives a garbage collection. This counter was designed as an indicator of relatively long-lived objects being created per sec. This counter displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRMemoryEntry 15 } ncmGen0HeapSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the maximum bytes that can be allocated in generation 0 (Gen 0); its does not indicate the current number of bytes allocated in Gen 0. A Gen 0 GC is triggered when the allocations since the last GC exceed this size. The Gen 0 size is tuned by the Garbage Collector and can change during the execution of the application. At the end of a Gen 0 collection the size of the Gen 0 heap is infact 0 bytes; this counter displays the size (in bytes) of allocations that would trigger the next Gen 0 GC. This counter is updated at the end of a GC; its not updated on every allocation." ::= { dotNETCLRMemoryEntry 16 } ncmGen1PromotedBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the bytes per second that are promoted from generation 1 to generation 2 (oldest); objects that are promoted just because they are waiting to be finalized are not included in this counter. Memory is promoted when it survives a garbage collection. Nothing is promoted from generation 2 since it is the oldest. This counter was designed as an indicator of very long-lived objects being created per sec. This counter displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRMemoryEntry 17 } ncmGen1HeapSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of bytes in generation 1 (Gen 1); this counter does not display the maximum size of Gen 1. Objects are not directly allocated in this generation; they are promoted from previous Gen 0 GCs. This counter is updated at the end of a GC; its not updated on every allocation." ::= { dotNETCLRMemoryEntry 18 } ncmGen2HeapSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of bytes in generation 2 (Gen 2). Objects are not directly allocated in this generation; they are promoted from Gen 1 during previous Gen 1 GCs. This counter is updated at the end of a GC; its not updated on every allocation." ::= { dotNETCLRMemoryEntry 19 } ncmLargeObjectHeapSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current size of the Large Object Heap in bytes. Objects greater than 20 KBytes are treated as large objects by the Garbage Collector and are directly allocated in a special heap; they are not promoted through the generations. This counter is updated at the end of a GC; its not updated on every allocation." ::= { dotNETCLRMemoryEntry 20 } ncmPromotFinalizationMemoryGen0 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the bytes of memory that are promoted from generation 0 to generation 1 just because they are waiting to be finalized. This counter displays the value observed at the end of the last GC; its not a cumulative counter." ::= { dotNETCLRMemoryEntry 21 } ncmPromotFinalizationMemoryGen1 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the bytes of memory that are promoted from generation 1 to generation 2 just because they are waiting to be finalized. This counter displays the value observed at the end of the last GC; its not a cumulative counter. This counter is reset to 0 if the last GC was a Gen 0 GC only." ::= { dotNETCLRMemoryEntry 22 } ncmPromotedMemoryFromGen0 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the bytes of memory that survive garbage collection (GC) and are promoted from generation 0 to generation 1; objects that are promoted just because they are waiting to be finalized are not included in this counter. This counter displays the value observed at the end of the last GC; its not a cumulative counter." ::= { dotNETCLRMemoryEntry 23 } ncmPromotedMemoryFromGen1 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the bytes of memory that survive garbage collection (GC) and are promoted from generation 1 to generation 2; objects that are promoted just because they are waiting to be finalized are not included in this counter. This counter displays the value observed at the end of the last GC; its not a cumulative counter. This counter is reset to 0 if the last GC was a Gen 0 GC only." ::= { dotNETCLRMemoryEntry 24 } ncmProcessID OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the process ID of the CLR process instance being monitored." ::= { dotNETCLRMemoryEntry 25 } dotNETCLRNetworkingTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRNetworkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Networking category includes counters that provide information about data that an application sends and receives over the network." ::= { advanced 18 } dotNETCLRNetworkingEntry OBJECT-TYPE SYNTAX DotNETCLRNetworkingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Networking' object." INDEX { ncnInstance } ::= { dotNETCLRNetworkingTable 1 } DotNETCLRNetworkingEntry ::= SEQUENCE { ncnInstance InstanceName, ncnBytesReceived Gauge32, ncnBytesSent Gauge32, ncnConnectionsEstablished Gauge32, ncnDatagramsReceived Gauge32, ncnDatagramsSent Gauge32 } ncnInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRNetworkingEntry 1 } ncnBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative total number of bytes received over all open socket connections since the process was started. This number includes data and any protocol information that is not defined by the TCP/IP protocol." ::= { dotNETCLRNetworkingEntry 2 } ncnBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative total number of bytes sent over all open socket connections since the process was started. This number includes data and any protocol information that is not defined by the TCP/IP protocol." ::= { dotNETCLRNetworkingEntry 3 } ncnConnectionsEstablished OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative total number of socket connections established for this process since the process was started." ::= { dotNETCLRNetworkingEntry 4 } ncnDatagramsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative total number of datagram packets received since the process was started." ::= { dotNETCLRNetworkingEntry 5 } ncnDatagramsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative total number of datagram packets sent since the process was started." ::= { dotNETCLRNetworkingEntry 6 } dotNETCLRRemotingTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRRemotingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Remoting category includes counters that provide information about the remoted objects that an application uses." ::= { advanced 19 } dotNETCLRRemotingEntry OBJECT-TYPE SYNTAX DotNETCLRRemotingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Remoting' object." INDEX { ncrInstance } ::= { dotNETCLRRemotingTable 1 } DotNETCLRRemotingEntry ::= SEQUENCE { ncrInstance InstanceName, ncrChannels Gauge32, ncrContextProxies Gauge32, ncrContextBoundClassesLoaded Gauge32, ncrContextBoundObjsAllocPerSec Gauge32, ncrContexts Gauge32, ncrRemoteCallsPerSec Gauge32, ncrTotalRemoteCalls Gauge32 } ncrInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRRemotingEntry 1 } ncrChannels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of remoting channels registered across all AppDomains since the start of the application. Channels are used to transport messages to and from remote objects." ::= { dotNETCLRRemotingEntry 2 } ncrContextProxies OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of remoting proxy objects created in this process since the start of the process. Proxy object acts as a representative of the remote objects and ensures that all calls made on the proxy are forwarded to the correct remote object instance." ::= { dotNETCLRRemotingEntry 3 } ncrContextBoundClassesLoaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of context-bound classes loaded. Classes that can be bound to a context are called context-bound classes; context-bound classes are marked with Context Attributes which provide usage rules for synchronization; thread affinity; transactions etc." ::= { dotNETCLRRemotingEntry 4 } ncrContextBoundObjsAllocPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of context-bound objects allocated per second. Instances of classes that can be bound to a context are called context-bound objects; context-bound classes are marked with Context Attributes which provide usage rules for synchronization; thread affinity; transactions etc. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRRemotingEntry 5 } ncrContexts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the current number of remoting contexts in the application. A context is a boundary containing a collection of objects with the same usage rules like synchronization; thread affinity; transactions etc." ::= { dotNETCLRRemotingEntry 6 } ncrRemoteCallsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of remote procedure calls invoked per second. A remote procedure call is a call on any object outside the caller;s AppDomain. This counter is not an average over time; it displays the difference between the values observed in the last two samples divided by the duration of the sample interval." ::= { dotNETCLRRemotingEntry 7 } ncrTotalRemoteCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of remote procedure calls invoked since the start of this application. A remote procedure call is a call on any object outside the caller;s AppDomain." ::= { dotNETCLRRemotingEntry 8 } dotNETCLRSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF DotNETCLRSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Performance console .NET CLR Security category includes counters that provide information about the security checks that the common language runtime performs for an application." ::= { advanced 20 } dotNETCLRSecurityEntry OBJECT-TYPE SYNTAX DotNETCLRSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of '.NET CLR Security' object." INDEX { ncsInstance } ::= { dotNETCLRSecurityTable 1 } DotNETCLRSecurityEntry ::= SEQUENCE { ncsInstance InstanceName, ncsNumLinkTimeChecks Gauge32, ncsPercentTimeSigAuthenticating Gauge32, ncsPercentTimeInRTChecks Gauge32, ncsStackWalkDepth Gauge32, ncsTotalRuntimeChecks Gauge32 } ncsInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { dotNETCLRSecurityEntry 1 } ncsNumLinkTimeChecks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of linktime Code Access Security (CAS) checks since the start of the application. Linktime CAS checks are performed when a caller makes a call to a callee demanding a particular permission at JIT compile time; linktime check is performed once per caller. This count is not indicative of serious performance issues; its indicative of the security system activity." ::= { dotNETCLRSecurityEntry 2 } ncsPercentTimeSigAuthenticating OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reserved for future use." ::= { dotNETCLRSecurityEntry 3 } ncsPercentTimeInRTChecks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the percentage of elapsed time spent in performing runtime Code Access Security (CAS) checks since the last such check. CAS allows code to be trusted to varying degrees and enforces these varying levels of trust depending on code identity. This counter is updated at the end of a runtime security check; it represents the last observed value; its not an average." ::= { dotNETCLRSecurityEntry 4 } ncsStackWalkDepth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the depth of the stack during that last runtime Code Access Security check. Runtime Code Access Security check is performed by crawling the stack. This counter is not an average; it just displays the last observed value." ::= { dotNETCLRSecurityEntry 5 } ncsTotalRuntimeChecks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the total number of runtime Code Access Security (CAS) checks performed since the start of the application. Runtime CAS checks are performed when a caller makes a call to a callee demanding a particular permission; the runtime check is made on every call by the caller; the check is done by examining the current thread stack of the caller. This counter used together with 'Stack Walk Depth' is indicative of performance penalty for security checks." ::= { dotNETCLRSecurityEntry 6 } fileReplicaConnTable OBJECT-TYPE SYNTAX SEQUENCE OF FileReplicaConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FileReplicaConn performance object displays performance statistics of the REPLICACONN object that defines replica connections to distributed file system (Dfs) roots." ::= { advanced 21 } fileReplicaConnEntry OBJECT-TYPE SYNTAX FileReplicaConnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'FileReplicaConn' object." INDEX { frcInstance } ::= { fileReplicaConnTable 1 } FileReplicaConnEntry ::= SEQUENCE { frcInstance InstanceName, frcAuthentications Gauge32, frcAuthenticationsInError Gauge32, frcBindings Gauge32, frcBindingsInError Gauge32, frcCommunicationTimeouts Gauge32, frcFetchBlocksReceived Gauge32, frcFetchBlocksReceivedInBytes Gauge32, frcFetchBlocksSent Gauge32, frcFetchBlocksSentInBytes Gauge32, frcFetchRequestsReceived Gauge32, frcFetchRequestsSent Gauge32, frcInboundChangeOrdersDampened Gauge32, frcJoinNotificationsReceived Gauge32, frcJoinNotificationsSent Gauge32, frcJoins Gauge32, frcLocalChangeOrdersSent Gauge32, frcLocalChangeOrdersSentAtJoin Gauge32, frcOutboundChangeOrdersDampened Gauge32, frcPacketsSent Gauge32, frcPacketsSentInBytes Gauge32, frcPacketsSentInError Gauge32, frcRemoteChangeOrdersReceived Gauge32, frcRemoteChangeOrdersSent Gauge32, frcUnjoins Gauge32 } frcInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { fileReplicaConnEntry 1 } frcAuthentications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful authentication checks made on packets received from the partner associated with this connection." ::= { fileReplicaConnEntry 2 } frcAuthenticationsInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of authentication check failures detected on packets received from the partner associated with this connection." ::= { fileReplicaConnEntry 3 } frcBindings OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful RPC bind requests to the FRS server on the partner associated with this connection." ::= { fileReplicaConnEntry 4 } frcBindingsInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of unsuccessful RPC bind requests to the FRS server on the partner associated with this connection." ::= { fileReplicaConnEntry 5 } frcCommunicationTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of times a communication request has taken too long to the partner associated with this connection." ::= { fileReplicaConnEntry 6 } frcFetchBlocksReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of blocks of staging file data received from the partner associated with this connection. The underlying transport may break a block into a smaller number of packets on the wire." ::= { fileReplicaConnEntry 7 } frcFetchBlocksReceivedInBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes of staging file data received from the partner associated with this connection." ::= { fileReplicaConnEntry 8 } frcFetchBlocksSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of blocks of staging file data sent to the partner associated with this connection. The underlying transport may break a block into a smaller number of packets on the wire." ::= { fileReplicaConnEntry 9 } frcFetchBlocksSentInBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes of staging file data sent to the partner associated with this connection." ::= { fileReplicaConnEntry 10 } frcFetchRequestsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of staging files received from the partner associated with this connection." ::= { fileReplicaConnEntry 11 } frcFetchRequestsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of staging files requested from the partner associated with this connection." ::= { fileReplicaConnEntry 12 } frcInboundChangeOrdersDampened OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of change orders received from the partner associated with this connection that have been filtered out by the inbound dampening check." ::= { fileReplicaConnEntry 13 } frcJoinNotificationsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of partner join notifications received from the partner associated with this connection." ::= { fileReplicaConnEntry 14 } frcJoinNotificationsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of partner join requests (if this is an inbound connection) or ready-to-join notifications (if this is an outbound connection) sent to the partner associated with this connection." ::= { fileReplicaConnEntry 15 } frcJoins OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful joins with the partner associated with this connection." ::= { fileReplicaConnEntry 16 } frcLocalChangeOrdersSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated replication change orders that have been sent to the partner associated with this connection." ::= { fileReplicaConnEntry 17 } frcLocalChangeOrdersSentAtJoin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated replication change orders produced by a partner induced version vector scan that have been sent to the partner associated with this connection." ::= { fileReplicaConnEntry 18 } frcOutboundChangeOrdersDampened OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of change orders sent to the partner associated with this connection that have been filtered out by the outbound dampening check and thus were never sent." ::= { fileReplicaConnEntry 19 } frcPacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FRS data and control packets sent to the partner associated with this connection." ::= { fileReplicaConnEntry 20 } frcPacketsSentInBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FRS data and control bytes sent to the partner associated with this connection." ::= { fileReplicaConnEntry 21 } frcPacketsSentInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of FRS data or control packets not sent because of some error condition associated with this connection." ::= { fileReplicaConnEntry 22 } frcRemoteChangeOrdersReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of change orders received from the partner associated with this connection that have passed the inbound dampening check." ::= { fileReplicaConnEntry 23 } frcRemoteChangeOrdersSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of replication change orders originating upstream from this member (i.e. remote) that have been sent to the partner associated with this connection." ::= { fileReplicaConnEntry 24 } frcUnjoins OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unjoins with the partner associated with this connection." ::= { fileReplicaConnEntry 25 } fileReplicaSetTable OBJECT-TYPE SYNTAX SEQUENCE OF FileReplicaSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FileReplicaSet performance object displays performance statistics of the REPLICASET object that defines a replica set (one or more replicas, shared volumes or directories that store duplicates of the contents of an original share). The object reports statistics for the computer that constitutes the original share. For example, in a bidirectional ring topology of three computers A, B, and C, where computer A and computer C both replicate from computer B, the FileReplicaSet counters would provide data for computer B." ::= { advanced 22 } fileReplicaSetEntry OBJECT-TYPE SYNTAX FileReplicaSetEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'FileReplicaSet' object." INDEX { frsInstance } ::= { fileReplicaSetTable 1 } FileReplicaSetEntry ::= SEQUENCE { frsInstance InstanceName, frsAuthentications Gauge32, frsAuthenticationsInError Gauge32, frsBindings Gauge32, frsBindingsInError Gauge32, frsBytesOfFilesInstalled Gauge32, frsBytesOfStagingFetched Gauge32, frsBytesOfStagingGenerated Gauge32, frsBytesOfStagingRegenerated Gauge32, frsChgOrdersAborted Gauge32, frsChgOrdersEvaporated Gauge32, frsChgOrdersIssued Gauge32, frsChgOrdersMorphed Gauge32, frsChgOrdersPropagated Gauge32, frsChgOrdersReceived Gauge32, frsChgOrdersRetired Gauge32, frsChgOrdersRetried Gauge32, frsChgOrdersRetriedFetch Gauge32, frsChgOrdersRetriedGenerate Gauge32, frsChgOrdersRetriedInstall Gauge32, frsChgOrdersRetriedRename Gauge32, frsChgOrdersSent Gauge32, frsCommunicationTimeouts Gauge32, frsDSBindings Gauge32, frsDSBindingsInError Gauge32, frsDSObjects Gauge32, frsDSObjectsInError Gauge32, frsDSPolls Gauge32, frsDSPollsWithChgs Gauge32, frsDSPollsWithoutChgs Gauge32, frsDSSearches Gauge32, frsDSSearchesInError Gauge32, frsFetchBlocksReceived Gauge32, frsFetchBlocksReceivedInBytes Gauge32, frsFetchBlocksSent Gauge32, frsFetchBlocksSentInBytes Gauge32, frsFetchRequestsReceived Gauge32, frsFetchRequestsSent Gauge32, frsFilesInstalled Gauge32, frsFilesInstalledWithError Gauge32, frsInboundChgOrdersDampened Gauge32, frsJoinNotificationsReceived Gauge32, frsJoinNotificationsSent Gauge32, frsJoins Gauge32, frsKBOfStagingSpaceFree Gauge32, frsKBOfStagingSpaceInUse Gauge32, frsLocalChgOrdersAborted Gauge32, frsLocalChgOrdersIssued Gauge32, frsLocalChgOrdersMorphed Gauge32, frsLocalChgOrdersPropagated Gauge32, frsLocalChgOrdersRetired Gauge32, frsLocalChgOrdersRetried Gauge32, frsLocalChgOrdersRetriedFetch Gauge32, frsLocalChgOrdersRetriedGenerate Gauge32, frsLocalChgOrdersRetriedInstall Gauge32, frsLocalChgOrdersRetriedRename Gauge32, frsLocalChgOrdersSent Gauge32, frsLocalChgOrdersSentJoin Gauge32, frsOutboundChgOrdersDampened Gauge32, frsPacketsReceived Gauge32, frsPacketsReceivedInBytes Gauge32, frsPacketsReceivedInError Gauge32, frsPacketsSent Gauge32, frsPacketsSentInBytes Gauge32, frsPacketsSentInError Gauge32, frsRemoteChgOrdersAborted Gauge32, frsRemoteChgOrdersIssued Gauge32, frsRemoteChgOrdersMorphed Gauge32, frsRemoteChgOrdersPropagated Gauge32, frsRemoteChgOrdersReceived Gauge32, frsRemoteChgOrdersRetired Gauge32, frsRemoteChgOrdersRetried Gauge32, frsRemoteChgOrdersRetriedFetch Gauge32, frsRemoteChgOrdersRetriedGenerat Gauge32, frsRemoteChgOrdersRetriedInstall Gauge32, frsRemoteChgOrdersRetriedRename Gauge32, frsRemoteChgOrdersSent Gauge32, frsReplicaSetsCreated Gauge32, frsReplicaSetsDeleted Gauge32, frsReplicaSetsRemoved Gauge32, frsReplicaSetsStarted Gauge32, frsStagingFilesFetched Gauge32, frsStagingFilesGenerated Gauge32, frsStagingFilesGeneratedWithErr Gauge32, frsStagingFilesRegenerated Gauge32, frsThreadsExited Gauge32, frsThreadsStarted Gauge32, frsUnjoins Gauge32, frsUsnReads Gauge32, frsUsnRecordsAccepted Gauge32, frsUsnRecordsExamined Gauge32, frsUsnRecordsRejected Gauge32 } frsInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { fileReplicaSetEntry 1 } frsAuthentications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful authentication checks made on packets received from any partner associated with this replica set member." ::= { fileReplicaSetEntry 2 } frsAuthenticationsInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of authentication check failures detected on packets received from any partner associated with this replica set member." ::= { fileReplicaSetEntry 3 } frsBindings OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful RPC bind requests to the FRS server on any partner associated with this replica set member." ::= { fileReplicaSetEntry 4 } frsBindingsInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of unsuccessful RPC bind requests to the FRS server on any partner associated with this replica set member." ::= { fileReplicaSetEntry 5 } frsBytesOfFilesInstalled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes of staging file data that have been installed on this replica set member." ::= { fileReplicaSetEntry 6 } frsBytesOfStagingFetched OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes of staging file data received by this replica set member from its inbound partners." ::= { fileReplicaSetEntry 7 } frsBytesOfStagingGenerated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes of staging file data generated by this replica set member not including the number of bytes produced as part of regeneration." ::= { fileReplicaSetEntry 8 } frsBytesOfStagingRegenerated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes of staging file data regenerated by this replica set member for a specific outbound partner request." ::= { fileReplicaSetEntry 9 } frsChgOrdersAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that were aborted on this replica set member." ::= { fileReplicaSetEntry 10 } frsChgOrdersEvaporated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local file updates that were never processed because the underlying file was deleted first." ::= { fileReplicaSetEntry 11 } frsChgOrdersIssued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates initiated on this replica set member." ::= { fileReplicaSetEntry 12 } frsChgOrdersMorphed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that encountered a name space collision on this replica set member." ::= { fileReplicaSetEntry 13 } frsChgOrdersPropagated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that were propagated to the outbound log of this replica set member. The update remains pending in the outbound log until it has been delivered to all outbound partners." ::= { fileReplicaSetEntry 14 } frsChgOrdersReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that have been received by this replica set member. Note that depending on the replication topology it is possible for the same remote file update to be sent from multiple inbound partners. However, only one will send the actual file data." ::= { fileReplicaSetEntry 15 } frsChgOrdersRetired OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates retired on this replica set member." ::= { fileReplicaSetEntry 16 } frsChgOrdersRetried OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that were retried for any reason on this replica set member." ::= { fileReplicaSetEntry 17 } frsChgOrdersRetriedFetch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that were retried due to a stage file fetch problem on this replica set member." ::= { fileReplicaSetEntry 18 } frsChgOrdersRetriedGenerate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that were retried due to a stage file generation problem on this replica set member." ::= { fileReplicaSetEntry 19 } frsChgOrdersRetriedInstall OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that were retried due to a stage file install problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory." ::= { fileReplicaSetEntry 20 } frsChgOrdersRetriedRename OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that were retried due to a problem during the final target file rename or delete operation on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory." ::= { fileReplicaSetEntry 21 } frsChgOrdersSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local plus remote file updates that have been sent to the outbound partners of this replica set member." ::= { fileReplicaSetEntry 22 } frsCommunicationTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of FRS data or control packets not sent to an outbound partner because the send request timed out." ::= { fileReplicaSetEntry 23 } frsDSBindings OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times FRS has attempted to acquire a binding handle to the active directory." ::= { fileReplicaSetEntry 24 } frsDSBindingsInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of attempts to acquire a binding handle to the active directory that failed with some error status." ::= { fileReplicaSetEntry 25 } frsDSObjects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FRS configuration Objects retreived from the directory service." ::= { fileReplicaSetEntry 26 } frsDSObjectsInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative count of FRS configuration objects retreived from the directory service that were missing either the distinguished name, object GUID or the relative distinguished name attributes." ::= { fileReplicaSetEntry 27 } frsDSPolls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times FRS has polled the active directory for FRS configuration information on this computer." ::= { fileReplicaSetEntry 28 } frsDSPollsWithChgs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times FRS has polled the active directory for FRS configuration information and configuration changes were found." ::= { fileReplicaSetEntry 29 } frsDSPollsWithoutChgs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times FRS has polled the active directory for FRS configuration information and no configuration changes were found." ::= { fileReplicaSetEntry 30 } frsDSSearches OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times FRS has made a search request to the active directory." ::= { fileReplicaSetEntry 31 } frsDSSearchesInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of times FRS has made a search request to the active directory and the request returned with an error condition." ::= { fileReplicaSetEntry 32 } frsFetchBlocksReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of blocks of staging file data received from all inbound partners associated with this replica set member. The underlying transport may break a block into a smaller number of packets on the wire." ::= { fileReplicaSetEntry 33 } frsFetchBlocksReceivedInBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes of staging file data received by this replica set member from all inbound partners." ::= { fileReplicaSetEntry 34 } frsFetchBlocksSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of blocks of staging file data sent to any outbound partner associated with this replica set member. The underlying transport may break a block into a smaller number of packets on the wire." ::= { fileReplicaSetEntry 35 } frsFetchBlocksSentInBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes of staging file data sent to the outbound partners of this replica set member." ::= { fileReplicaSetEntry 36 } frsFetchRequestsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of staging files received from all inbound partners associated with this replica set member." ::= { fileReplicaSetEntry 37 } frsFetchRequestsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of staging files requested from any inbound partner associated with this replica set member." ::= { fileReplicaSetEntry 38 } frsFilesInstalled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of file updates and deletes performed on this replica set member." ::= { fileReplicaSetEntry 39 } frsFilesInstalledWithError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of file updates that were aborted because of some non-recoverable error." ::= { fileReplicaSetEntry 40 } frsInboundChgOrdersDampened OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were dampened because the update was already delivered by another member." ::= { fileReplicaSetEntry 41 } frsJoinNotificationsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of partner join notifications received from all inbound partners associated with this replica set member." ::= { fileReplicaSetEntry 42 } frsJoinNotificationsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of inbound partner join requests or outbound partner ready-to-join notifications sent to all partners associated with this replica set member." ::= { fileReplicaSetEntry 43 } frsJoins OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful joins with any partner associated with this replica set member." ::= { fileReplicaSetEntry 44 } frsKBOfStagingSpaceFree OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of staging space (in Kilobyte units) currently available within the staging space limit. Note that there may not actually be this amount of free space left on the staging volume." ::= { fileReplicaSetEntry 45 } frsKBOfStagingSpaceInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of staging space (in Kilobyte units) currently in use." ::= { fileReplicaSetEntry 46 } frsLocalChgOrdersAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that were aborted. Most likely because a file was deleted before a change to it could be propagated so no stage file could be generated." ::= { fileReplicaSetEntry 47 } frsLocalChgOrdersIssued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates initiated on this replica set member." ::= { fileReplicaSetEntry 48 } frsLocalChgOrdersMorphed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that encountered a name space collision on this replica set member. Most likely caused by the reanimation of a parent dir." ::= { fileReplicaSetEntry 49 } frsLocalChgOrdersPropagated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that were propagated to the outbound log of this replica set member. The update remains pending in the outbound log until it has been delivered to all outbound partners." ::= { fileReplicaSetEntry 50 } frsLocalChgOrdersRetired OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates retired on this replica set member." ::= { fileReplicaSetEntry 51 } frsLocalChgOrdersRetried OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that were retried for any reason on this replica set member." ::= { fileReplicaSetEntry 52 } frsLocalChgOrdersRetriedFetch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that were retried due to a stage file fetch problem on this replica set member." ::= { fileReplicaSetEntry 53 } frsLocalChgOrdersRetriedGenerate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that were retried due to a stage file generation problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file." ::= { fileReplicaSetEntry 54 } frsLocalChgOrdersRetriedInstall OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that were retried due to a stage file install problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory." ::= { fileReplicaSetEntry 55 } frsLocalChgOrdersRetriedRename OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that were retried due to a problem during the final target file rename or delete operation on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory." ::= { fileReplicaSetEntry 56 } frsLocalChgOrdersSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates that have been sent to the outbound partners of this replica set member." ::= { fileReplicaSetEntry 57 } frsLocalChgOrdersSentJoin OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of locally originated file updates which were created by a partner induced version vector scan that have been sent to the outbound partners of this replica set member." ::= { fileReplicaSetEntry 58 } frsOutboundChgOrdersDampened OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending outbound file updates that were dampened because the outbound partner has already received it from another source." ::= { fileReplicaSetEntry 59 } frsPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FRS data or control packets (RPC calls) received by FRS." ::= { fileReplicaSetEntry 60 } frsPacketsReceivedInBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FRS data and control bytes received by all replica sets on this computer." ::= { fileReplicaSetEntry 61 } frsPacketsReceivedInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of FRS data or control packets received that were out of rev or otherwise malformed." ::= { fileReplicaSetEntry 62 } frsPacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FRS data and control packets sent to all outbound partners associated with this replica set member." ::= { fileReplicaSetEntry 63 } frsPacketsSentInBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FRS data and control bytes sent by this replica set member to other members." ::= { fileReplicaSetEntry 64 } frsPacketsSentInError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of FRS data or control packets not sent to an outbound partner because of some error condition." ::= { fileReplicaSetEntry 65 } frsRemoteChgOrdersAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were aborted. Most likely because of an attempt to fetch a staging file from an inbound partner and the partner no longer has the file because it has been deleted." ::= { fileReplicaSetEntry 66 } frsRemoteChgOrdersIssued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates initiated on this replica set member." ::= { fileReplicaSetEntry 67 } frsRemoteChgOrdersMorphed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that encountered a name space collision on this replica set member. Most likely caused by simultaneous create of a file or directory with the same name on more than one replica set member." ::= { fileReplicaSetEntry 68 } frsRemoteChgOrdersPropagated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were propagated to the outbound log of this replica set member. The update remains pending in the outbound log until it has been delivered to all outbound partners." ::= { fileReplicaSetEntry 69 } frsRemoteChgOrdersReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that have been received by this replica set member. Note that depending on the replication topology it is possible for the same file update to be sent from multiple inbound partners. However, only one will send the actual file data." ::= { fileReplicaSetEntry 70 } frsRemoteChgOrdersRetired OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates retired on this replica set member." ::= { fileReplicaSetEntry 71 } frsRemoteChgOrdersRetried OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were retried for any reason on this replica set member." ::= { fileReplicaSetEntry 72 } frsRemoteChgOrdersRetriedFetch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were retried due to a stage file fetch problem on this replica set member." ::= { fileReplicaSetEntry 73 } frsRemoteChgOrdersRetriedGenerat OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were retried due to a stage file generation problem on this replica set member." ::= { fileReplicaSetEntry 74 } frsRemoteChgOrdersRetriedInstall OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were retried due to a stage file install problem on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory." ::= { fileReplicaSetEntry 75 } frsRemoteChgOrdersRetriedRename OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that were retried due to a problem during the final target file rename or delete operation on this replica set member. Most likely caused by a sharing conflict trying to access the target file or directory." ::= { fileReplicaSetEntry 76 } frsRemoteChgOrdersSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remotely originated file updates that have been sent to the outbound partners of this replica set member." ::= { fileReplicaSetEntry 77 } frsReplicaSetsCreated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of replica sets to which this computer has been added as a member." ::= { fileReplicaSetEntry 78 } frsReplicaSetsDeleted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of replica sets from which this computer's membership has been provisionally deleted, but could still be reanimated." ::= { fileReplicaSetEntry 79 } frsReplicaSetsRemoved OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of replica sets from which this computer's membership has been permanently deleted." ::= { fileReplicaSetEntry 80 } frsReplicaSetsStarted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of replica sets for which processing has been started." ::= { fileReplicaSetEntry 81 } frsStagingFilesFetched OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of staging files requested by this replica set member." ::= { fileReplicaSetEntry 82 } frsStagingFilesGenerated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of staging files generated by this replica set member." ::= { fileReplicaSetEntry 83 } frsStagingFilesGeneratedWithErr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of staging files generated by this replica set member where an error was detected during generation." ::= { fileReplicaSetEntry 84 } frsStagingFilesRegenerated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of staging files regenerated by this replica set member for a specific outbound partner request." ::= { fileReplicaSetEntry 85 } frsThreadsExited OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of execution threads that have terminated." ::= { fileReplicaSetEntry 86 } frsThreadsStarted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of new execution threads started." ::= { fileReplicaSetEntry 87 } frsUnjoins OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unjoins with any partner associated with this replica set member." ::= { fileReplicaSetEntry 88 } frsUsnReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times FRS has initiated a read on the NTFRS change log. Each volume has its own change log." ::= { fileReplicaSetEntry 89 } frsUsnRecordsAccepted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NTFS change log records accepted by FRS for further processing." ::= { fileReplicaSetEntry 90 } frsUsnRecordsExamined OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NTFS change log records examined by FRS." ::= { fileReplicaSetEntry 91 } frsUsnRecordsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NTFS change log records skipped by FRS. Most likely because the change log record was for a file not part of any active replica set." ::= { fileReplicaSetEntry 92 } ftpServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF FTPServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The FTP Service performance object consists of counters that show data about the Internet Information Services FTP service." ::= { advanced 23 } ftpServiceEntry OBJECT-TYPE SYNTAX FTPServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'FTP Service' object." INDEX { ftpSvcInstance } ::= { ftpServiceTable 1 } FTPServiceEntry ::= SEQUENCE { ftpSvcInstance InstanceName, ftpSvcBytesReceivedPerSec Gauge32, ftpSvcBytesSentPerSec Gauge32, ftpSvcBytesTotalPerSec Gauge32, ftpSvcCurrentAnonymousUsers Gauge32, ftpSvcCurrentConnections Gauge32, ftpSvcCurrentNonAnonymousUsers Gauge32, ftpSvcFTPServiceUptime Gauge32, ftpSvcMaximumAnonymousUsers Gauge32, ftpSvcMaximumConnections Gauge32, ftpSvcMaximumNonAnonymousUsers Gauge32, ftpSvcTotalAnonymousUsers Gauge32, ftpSvcTotalConnAttemptsAllInst Gauge32, ftpSvcTotalFilesReceived Gauge32, ftpSvcTotalFilesSent Gauge32, ftpSvcTotalFilesTransferred Gauge32, ftpSvcTotalLogonAttempts Gauge32, ftpSvcTotalNonAnonymousUsers Gauge32 } ftpSvcInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { ftpServiceEntry 1 } ftpSvcBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Received/sec is the rate that data bytes are received by the FTP service." ::= { ftpServiceEntry 2 } ftpSvcBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Sent/sec is the rate that data bytes are sent by the FTP service." ::= { ftpServiceEntry 3 } ftpSvcBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the sum of Bytes Sent/sec and Bytes Received/sec. This is the total rate of bytes transferred by the FTP service." ::= { ftpServiceEntry 4 } ftpSvcCurrentAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Anonymous Users is the number of users who currently have an anonymous connection using the FTP service." ::= { ftpServiceEntry 5 } ftpSvcCurrentConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connections is the current number of connections established with the FTP service." ::= { ftpServiceEntry 6 } ftpSvcCurrentNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current NonAnonymous Users is the number of users who currently have a non-anonymous connection using the FTP service." ::= { ftpServiceEntry 7 } ftpSvcFTPServiceUptime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "FTP Serive and FTP site uptime in seconds." ::= { ftpServiceEntry 8 } ftpSvcMaximumAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Anonymous Users is the maximum number of users who established concurrent anonymous connections using the FTP service (since service startup)." ::= { ftpServiceEntry 9 } ftpSvcMaximumConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Connections is the maximum number of simultaneous connections established with the FTP service." ::= { ftpServiceEntry 10 } ftpSvcMaximumNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum NonAnonymous Users is the maximum number of users who established concurrent non-anonymous connections using the FTP service (since service startup)." ::= { ftpServiceEntry 11 } ftpSvcTotalAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Anonymous Users is the total number of users who established an anonymous connection with the FTP service (since service startup)." ::= { ftpServiceEntry 12 } ftpSvcTotalConnAttemptsAllInst OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Connection Attempts is the number of connections that have been attempted using the FTP service (since service startup). This counter is for all instances listed." ::= { ftpServiceEntry 13 } ftpSvcTotalFilesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Files Received is the total number of files received by the FTP service since service startup." ::= { ftpServiceEntry 14 } ftpSvcTotalFilesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Files Sent is the total number of files sent by the FTP service since service startup." ::= { ftpServiceEntry 15 } ftpSvcTotalFilesTransferred OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Files Transferred is the sum of Files Sent and Files Received. This is the total number of files transferred by the FTP service since service startup." ::= { ftpServiceEntry 16 } ftpSvcTotalLogonAttempts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Logon Attempts is the number of logons that have been attempted using the FTP service (since service startup)." ::= { ftpServiceEntry 17 } ftpSvcTotalNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total NonAnonymous Users is the total number of users who established a non-anonymous connection with the FTP service (since service startup)." ::= { ftpServiceEntry 18 } gatewayServiceForNetWare OBJECT-IDENTITY STATUS current DESCRIPTION "The Gateway for NetWare Service performance object consists of counters that measure packet transmission rates and activity of the Gateway for NetWare service." ::= { advanced 24 } nwBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Received/sec is the rate of bytes coming in to the Redirector from the network. It includes all application data as well as network protocol information (such as packet headers)." ::= { gatewayServiceForNetWare 1 } nwBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the rate the Redirector is processing data bytes. This includes all application and file data in addition to protocol information such as packet headers." ::= { gatewayServiceForNetWare 2 } nwBytesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Transmitted/sec is the rate at which bytes are leaving the Redirector to the network. It includes all application data as well as network protocol information (such as packet headers and the like)." ::= { gatewayServiceForNetWare 3 } nwConnectNetWare2X OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connect NetWare 2.x counts connections to NetWare 2.x servers." ::= { gatewayServiceForNetWare 4 } nwConnectNetWare3X OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connect NetWare 3.x counts connections to NetWare 3.x servers." ::= { gatewayServiceForNetWare 5 } nwConnectNetWare4X OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connect NetWare 4.x counts connections to NetWare 4.x servers." ::= { gatewayServiceForNetWare 6 } nwFileDataOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Data Operations/sec is the rate the Redirector is processing data operations. One operation includes (hopefully) many bytes. We say hopefully here because each operation has overhead. You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/operation." ::= { gatewayServiceForNetWare 7 } nwFileReadOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Read Operations/sec is the rate at which applications are asking the Redirector for data. Each call to a file system or similar Application Program Interface (API) call counts as one operation." ::= { gatewayServiceForNetWare 8 } nwFileWriteOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Write Operations/sec is the rate at which applications are sending data to the Redirector. Each call to a file system or similar Application Program Interface (API) call counts as one operation." ::= { gatewayServiceForNetWare 9 } nwPacketBurstIOPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet Burst IO/sec is the sum of Packet Burst Read NCPs/sec and Packet Burst Write NCPs/sec." ::= { gatewayServiceForNetWare 10 } nwPacketBurstReadNCPCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet Burst Read NCP Count/sec is the rate of NetWare Core Protocol requests for Packet Burst Read. Packet Burst is a windowing protocol that improves performance." ::= { gatewayServiceForNetWare 11 } nwPacketBurstReadTimeoutsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet Burst Read Timeouts/sec is the rate the NetWare Service needs to retransmit a Burst Read Request because the NetWare server took too long to respond." ::= { gatewayServiceForNetWare 12 } nwPacketBurstWriteNCPCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet Burst Write NCP Count/sec is the rate of NetWare Core Protocol requests for Packet Burst Write. Packet Burst is a windowing protocol that improves performance." ::= { gatewayServiceForNetWare 13 } nwPacketBurstWriteTimeoutsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packet Burst Write Timeouts/sec is the rate the NetWare Service needs to retransmit a Burst Write Request because the NetWare server took too long to respond." ::= { gatewayServiceForNetWare 14 } nwPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which the Redirector is receiving packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes received in a packet can be obtained by dividing Bytes Received/sec by this counter. Some packets received might not contain incoming data, for example an acknowledgment to a write made by the Redirector would count as an incoming packet." ::= { gatewayServiceForNetWare 15 } nwPacketsTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Transmitted/sec is the rate at which the Redirector is sending packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes transmitted in a packet can be obtained by dividing Bytes Transmitted/sec by this counter." ::= { gatewayServiceForNetWare 16 } nwPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets/sec is the rate the Redirector is processing data packets. One packet includes (hopefully) many bytes. We say hopefully here because each packet has protocol overhead. You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/packet. You can also divide this counter by Operations/sec to determine the average number of packets per operation, another measure of efficiency." ::= { gatewayServiceForNetWare 17 } nwReadOperationsRandomPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Operations Random/sec counts the rate at which, on a file-by-file basis, reads are made that are not sequential. If a read is made using a particular file handle, and then is followed by another read that is not immediately the contiguous next byte, this counter is incremented by one." ::= { gatewayServiceForNetWare 18 } nwReadPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Packets/sec is the rate at which read packets are being placed on the network. Each time a single packet is sent with a request to read data remotely, this counter is incremented by one." ::= { gatewayServiceForNetWare 19 } nwServerDisconnects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Disconnects counts the number of times a Server has disconnected your Redirector. See also Server Reconnects." ::= { gatewayServiceForNetWare 20 } nwServerReconnects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Reconnects counts the number of times your Redirector has had to reconnect to a server in order to complete a new active request. You can be disconnected by the Server if you remain inactive for too long. Locally even if all your remote files are closed, the Redirector will keep your connections intact for (nominally) ten minutes. Such inactive connections are called Dormant Connections. Reconnecting is expensive in time." ::= { gatewayServiceForNetWare 21 } nwServerSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Sessions counts the total number of security objects the Redirector has managed. For example, a logon to a server followed by a network access to the same server will establish one connection, but two sessions." ::= { gatewayServiceForNetWare 22 } nwWriteOperationsRandomPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Operations Random/sec is the rate at which, on a file-by-file basis, writes are made that are not sequential. If a write is made using a particular file handle, and then is followed by another write that is not immediately the next contiguous byte, this counter is incremented by one." ::= { gatewayServiceForNetWare 23 } nwWritePacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Packets/sec is the rate at which writes are being sent to the network. Each time a single packet is sent with a request to write remote data, this counter is incremented by one." ::= { gatewayServiceForNetWare 24 } iasAccountingClientsTable OBJECT-TYPE SYNTAX SEQUENCE OF IASAccountingClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IAS Accounting Clients performance object is installed by the Internet Authentication Service (IAS). IAS uses the Remote Authentication Dial-In User Service (RADIUS) protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage)." ::= { advanced 25 } iasAccountingClientsEntry OBJECT-TYPE SYNTAX IASAccountingClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'IAS Accounting Clients' object." INDEX { iccInstance } ::= { iasAccountingClientsTable 1 } IASAccountingClientsEntry ::= SEQUENCE { iccInstance InstanceName, iccAccountingRequests Gauge32, iccAccountingRequestsPerSec Gauge32, iccAccountingResponses Gauge32, iccAccountingResponsesPerSec Gauge32, iccBadAuthenticators Gauge32, iccBadAuthenticatorsPerSec Gauge32, iccDroppedPackets Gauge32, iccDroppedPacketsPerSec Gauge32, iccDuplicateAccountingRequests Gauge32, iccDuplicateAccountingRqstPerSec Gauge32, iccMalformedPackets Gauge32, iccMalformedPacketsPerSec Gauge32, iccNoRecord Gauge32, iccNoRecordPerSec Gauge32, iccPacketsReceived Gauge32, iccPacketsReceivedPerSec Gauge32, iccPacketsSent Gauge32, iccPacketsSentPerSec Gauge32, iccUnknownType Gauge32, iccUnknownTypePerSec Gauge32 } iccInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { iasAccountingClientsEntry 1 } iccAccountingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of packets received from this client on the accounting port." ::= { iasAccountingClientsEntry 2 } iccAccountingRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which packets were received from this client on the accounting port." ::= { iasAccountingClientsEntry 3 } iccAccountingResponses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of RADIUS Accounting-Response packets sent to this client." ::= { iasAccountingClientsEntry 4 } iccAccountingResponsesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate in seconds at which duplicate RADIUS Accounting-Request packets were received from this client." ::= { iasAccountingClientsEntry 5 } iccBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of packets that contained invalid Signature attributes." ::= { iasAccountingClientsEntry 6 } iccBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which packets that contained invalid Signature attributes were received." ::= { iasAccountingClientsEntry 7 } iccDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of incoming packets silently discarded for a reason other than being malformed, bad authenticators, or unknown types." ::= { iasAccountingClientsEntry 8 } iccDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate in seconds at which incoming packets were silently discarded for a reason other than being malformed, bad authenticators, or unknown types." ::= { iasAccountingClientsEntry 9 } iccDuplicateAccountingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of duplicate RADIUS Accounting-Request packets received from this client." ::= { iasAccountingClientsEntry 10 } iccDuplicateAccountingRqstPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which duplicate RADIUS Accounting-Request packets were received from this client." ::= { iasAccountingClientsEntry 11 } iccMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of malformed packets received. Bad authenticators or unknown types are not included." ::= { iasAccountingClientsEntry 12 } iccMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which malformed packets were received." ::= { iasAccountingClientsEntry 13 } iccNoRecord OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of RADIUS Accounting-Request packets that were received and responded to but not recorded." ::= { iasAccountingClientsEntry 14 } iccNoRecordPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which RADIUS Accounting-Request packets were received and responded to but not recorded." ::= { iasAccountingClientsEntry 15 } iccPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of packets received." ::= { iasAccountingClientsEntry 16 } iccPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which packets were received." ::= { iasAccountingClientsEntry 17 } iccPacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of packets sent." ::= { iasAccountingClientsEntry 18 } iccPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which packets were sent." ::= { iasAccountingClientsEntry 19 } iccUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of packets of unknown type that were received. An unknown type is a RADIUS packet that contains an unrecognized entry in the Code field, used to identify the packet type. Consequently IAS does not support packets of unknown type." ::= { iasAccountingClientsEntry 20 } iccUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the rate, in seconds, at which packets of unknown type were received." ::= { iasAccountingClientsEntry 21 } iasAccountingProxy OBJECT IDENTIFIER ::= { advanced 26 } icpAccountingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets received on the accounting port." ::= { iasAccountingProxy 1 } icpAccountingRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Accounting-Request packets sent per second to the accounting port." ::= { iasAccountingProxy 2 } icpAccountingResponses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets received on the accounting port." ::= { iasAccountingProxy 3 } icpAccountingResponsesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Accounting-Response packets received per second on the accounting port." ::= { iasAccountingProxy 4 } icpBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that contain an invalid Message Authenticator attribute." ::= { iasAccountingProxy 5 } icpBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS packets per second that contain an invalid Message Authenticator attribute." ::= { iasAccountingProxy 6 } icpDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasAccountingProxy 7 } icpDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasAccountingProxy 8 } icpInvalidAddresses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received from unknown addresses." ::= { iasAccountingProxy 9 } icpInvalidAddressesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets per second received from unknown addresses." ::= { iasAccountingProxy 10 } icpMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets containing malformed data received." ::= { iasAccountingProxy 11 } icpMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets containing malformed data received per second." ::= { iasAccountingProxy 12 } icpPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received." ::= { iasAccountingProxy 13 } icpPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets received per second." ::= { iasAccountingProxy 14 } icpPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests destined for this server that have not yet timed out or received a response." ::= { iasAccountingProxy 15 } icpRequestTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of request timeouts to this server." ::= { iasAccountingProxy 16 } icpRequestTimeoutsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of request timeouts per second to this server." ::= { iasAccountingProxy 17 } icpRetransmissions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests retransmitted to this server." ::= { iasAccountingProxy 18 } icpRetransmissionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of requests retransmitted per second to this server." ::= { iasAccountingProxy 19 } icpUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unknown type (non-RADIUS) packets received." ::= { iasAccountingProxy 20 } icpUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of unknown type (non-RADIUS) packets received per second." ::= { iasAccountingProxy 21 } iasAccountingServer OBJECT-IDENTITY STATUS current DESCRIPTION "The IAS Accounting Server performance object is installed by the IAS. IAS uses the RADIUS protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage)." ::= { advanced 27 } icsAccountingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received from this client on the accounting port." ::= { iasAccountingServer 1 } icsAccountingRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second received from this client on the accounting port." ::= { iasAccountingServer 2 } icsAccountingResponses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets sent to this client." ::= { iasAccountingServer 3 } icsAccountingResponsesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets per second sent to this client." ::= { iasAccountingServer 4 } icsBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which contained invalid Signature attributes." ::= { iasAccountingServer 5 } icsBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second which contained invalid Signature attributes." ::= { iasAccountingServer 6 } icsDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets silently discarded for a reason other than malformed, bad authenticators, or unknown types." ::= { iasAccountingServer 7 } icsDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets per second silently discarded for a reason other than malformed, bad authenticators, or unknown types." ::= { iasAccountingServer 8 } icsDuplicateAccountingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of duplicate RADIUS Accounting-Request packets received from this client." ::= { iasAccountingServer 9 } icsDuplicateAccountingRqstPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of duplicate RADIUS Accounting-Request packets per second received from this client." ::= { iasAccountingServer 10 } icsInvalidRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received from unknown addresses." ::= { iasAccountingServer 11 } icsInvalidRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received per second from unknown addresses." ::= { iasAccountingServer 12 } icsMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed packets received. Bad authenticators or unknown types are not included." ::= { iasAccountingServer 13 } icsMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed packets per second received. Bad authenticators or unknown types are not included." ::= { iasAccountingServer 14 } icsNoRecord OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets which were received and responded to but not recorded." ::= { iasAccountingServer 15 } icsNoRecordPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets per second which were received and responded to but not recorded." ::= { iasAccountingServer 16 } icsPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received." ::= { iasAccountingServer 17 } icsPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second received." ::= { iasAccountingServer 18 } icsPacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent." ::= { iasAccountingServer 19 } icsPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent per second." ::= { iasAccountingServer 20 } icsServerResetTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed (in hundredths of a second) since the server configuration was reset." ::= { iasAccountingServer 21 } icsServerUpTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed (in hundredths of a second) since the server process was started." ::= { iasAccountingServer 22 } icsUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets of unknown type which were received." ::= { iasAccountingServer 23 } icsUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second of unknown type which were received." ::= { iasAccountingServer 24 } iasAuthenticationClientsTable OBJECT-TYPE SYNTAX SEQUENCE OF IASAuthenticationClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IAS Authentication Clients performance object is installed by IAS. IAS uses the RADIUS protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage)." ::= { advanced 28 } iasAuthenticationClientsEntry OBJECT-TYPE SYNTAX IASAuthenticationClientsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'IAS Authentication Clients' object." INDEX { iucInstance } ::= { iasAuthenticationClientsTable 1 } IASAuthenticationClientsEntry ::= SEQUENCE { iucInstance InstanceName, iucAccessAccepts Gauge32, iucAccessAcceptsPerSec Gauge32, iucAccessChallenges Gauge32, iucAccessChallengesPerSec Gauge32, iucAccessRejects Gauge32, iucAccessRejectsPerSec Gauge32, iucAccessRequests Gauge32, iucAccessRequestsPerSec Gauge32, iucBadAuthenticators Gauge32, iucBadAuthenticatorsPerSec Gauge32, iucDroppedPackets Gauge32, iucDroppedPacketsPerSec Gauge32, iucDuplicateAccessRequests Gauge32, iucDuplicateAccessRequestsPerSec Gauge32, iucMalformedPackets Gauge32, iucMalformedPacketsPerSec Gauge32, iucPacketsReceived Gauge32, iucPacketsReceivedPerSec Gauge32, iucPacketsSent Gauge32, iucPacketsSentPerSec Gauge32, iucUnknownType Gauge32, iucUnknownTypePerSec Gauge32 } iucInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { iasAuthenticationClientsEntry 1 } iucAccessAccepts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Accepts" ::= { iasAuthenticationClientsEntry 2 } iucAccessAcceptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Accepts / sec." ::= { iasAuthenticationClientsEntry 3 } iucAccessChallenges OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Challenges" ::= { iasAuthenticationClientsEntry 4 } iucAccessChallengesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Challenges / sec." ::= { iasAuthenticationClientsEntry 5 } iucAccessRejects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Rejects" ::= { iasAuthenticationClientsEntry 6 } iucAccessRejectsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Rejects / sec." ::= { iasAuthenticationClientsEntry 7 } iucAccessRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Requests" ::= { iasAuthenticationClientsEntry 8 } iucAccessRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Access-Requests / sec." ::= { iasAuthenticationClientsEntry 9 } iucBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bad Authenticators" ::= { iasAuthenticationClientsEntry 10 } iucBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bad Authenticators / sec." ::= { iasAuthenticationClientsEntry 11 } iucDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dropped Packets" ::= { iasAuthenticationClientsEntry 12 } iucDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Dropped Packets / sec." ::= { iasAuthenticationClientsEntry 13 } iucDuplicateAccessRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duplicate Access-Requests" ::= { iasAuthenticationClientsEntry 14 } iucDuplicateAccessRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duplicate Access-Requests / sec." ::= { iasAuthenticationClientsEntry 15 } iucMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Malformed Packets" ::= { iasAuthenticationClientsEntry 16 } iucMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Malformed Packets / sec." ::= { iasAuthenticationClientsEntry 17 } iucPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received" ::= { iasAuthenticationClientsEntry 18 } iucPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received / sec." ::= { iasAuthenticationClientsEntry 19 } iucPacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent" ::= { iasAuthenticationClientsEntry 20 } iucPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent / sec." ::= { iasAuthenticationClientsEntry 21 } iucUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unknown Type" ::= { iasAuthenticationClientsEntry 22 } iucUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unknown Type / sec." ::= { iasAuthenticationClientsEntry 23 } iasAuthenticationProxy OBJECT IDENTIFIER ::= { advanced 29 } iupAccessAccepts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets received from this server." ::= { iasAuthenticationProxy 1 } iupAccessAcceptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Access-Accept packets per second received from this server." ::= { iasAuthenticationProxy 2 } iupAccessChallenges OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets received from this server." ::= { iasAuthenticationProxy 3 } iupAccessChallengesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Access-Challenge packets per second received from this server." ::= { iasAuthenticationProxy 4 } iupAccessRejects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets received from this server." ::= { iasAuthenticationProxy 5 } iupAccessRejectsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Access-Reject packets per second received from this server." ::= { iasAuthenticationProxy 6 } iupAccessRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Request packets sent to this server." ::= { iasAuthenticationProxy 7 } iupAccessRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Access-Request packets per second sent to this server." ::= { iasAuthenticationProxy 8 } iupBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that contain an invalid Message Authenticator attribute." ::= { iasAuthenticationProxy 9 } iupBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS packets per second that contain an invalid Message Authenticator attribute." ::= { iasAuthenticationProxy 10 } iupDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasAuthenticationProxy 11 } iupDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasAuthenticationProxy 12 } iupInvalidAddresses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received from unknown addresses." ::= { iasAuthenticationProxy 13 } iupInvalidAddressesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets per second received from unknown addresses." ::= { iasAuthenticationProxy 14 } iupMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets containing malformed data received." ::= { iasAuthenticationProxy 15 } iupMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets containing malformed data received per second." ::= { iasAuthenticationProxy 16 } iupPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received." ::= { iasAuthenticationProxy 17 } iupPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets received per second." ::= { iasAuthenticationProxy 18 } iupPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests destined for this server that have not yet timed out or received a response." ::= { iasAuthenticationProxy 19 } iupRequestTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of request timeouts to this server." ::= { iasAuthenticationProxy 20 } iupRequestTimeoutsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of request timeouts per second to this server." ::= { iasAuthenticationProxy 21 } iupRetransmissions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests retransmitted to this server." ::= { iasAuthenticationProxy 22 } iupRetransmissionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of requests retransmitted per second to this server." ::= { iasAuthenticationProxy 23 } iupUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unknown type (non-RADIUS) packets received." ::= { iasAuthenticationProxy 24 } iupUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of unknown type (non-RADIUS) packets received per second." ::= { iasAuthenticationProxy 25 } iasAuthenticationServer OBJECT-IDENTITY STATUS current DESCRIPTION "The IAS Authentication Server performance object is installed by IAS. IAS uses the RADIUS protocol to perform remote authentication. IAS performance objects report activity for servers or clients, including user authentication, authorization, and accounting (usage)." ::= { advanced 30 } iusAccessAccepts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets sent to this client." ::= { iasAuthenticationServer 1 } iusAccessAcceptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets per second sent to this client." ::= { iasAuthenticationServer 2 } iusAccessChallenges OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets sent to this client." ::= { iasAuthenticationServer 3 } iusAccessChallengesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets per second sent to this client." ::= { iasAuthenticationServer 4 } iusAccessRejects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets sent to this client." ::= { iasAuthenticationServer 5 } iusAccessRejectsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets per second sent to this client." ::= { iasAuthenticationServer 6 } iusAccessRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received on the authentication port from this client." ::= { iasAuthenticationServer 7 } iusAccessRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second received on the authentication port from this client." ::= { iasAuthenticationServer 8 } iusBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which contained invalid Signature attributes." ::= { iasAuthenticationServer 9 } iusBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second which contained invalid Signature attributes." ::= { iasAuthenticationServer 10 } iusDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets silently discarded for a reason other than malformed, bad authenticators, or unknown types." ::= { iasAuthenticationServer 11 } iusDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets per second silently discarded for a reason other than malformed, bad authenticators, or unknown types." ::= { iasAuthenticationServer 12 } iusDuplicateAccessRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of duplicate RADIUS Access-Request packets received from this client." ::= { iasAuthenticationServer 13 } iusDuplicateAccessRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of duplicate RADIUS Access-Request packets per second received from this client." ::= { iasAuthenticationServer 14 } iusInvalidRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received from unknown addresses." ::= { iasAuthenticationServer 15 } iusInvalidRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received per second from unknown addresses." ::= { iasAuthenticationServer 16 } iusMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed packets received. Bad authenticators or unknown types are not included." ::= { iasAuthenticationServer 17 } iusMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed packets per second received. Bad authenticators or unknown types are not included." ::= { iasAuthenticationServer 18 } iusPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received." ::= { iasAuthenticationServer 19 } iusPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second received." ::= { iasAuthenticationServer 20 } iusPacketsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent." ::= { iasAuthenticationServer 21 } iusPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets sent per second." ::= { iasAuthenticationServer 22 } iusServerResetTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed (in hundredths of a second) since the server configuration was reset." ::= { iasAuthenticationServer 23 } iusServerUpTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time elapsed (in hundredths of a second) since the server process was started." ::= { iasAuthenticationServer 24 } iusUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets of unknown type which were received." ::= { iasAuthenticationServer 25 } iusUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second of unknown type which were received." ::= { iasAuthenticationServer 26 } iasRemoteAccountingServersTable OBJECT-TYPE SYNTAX SEQUENCE OF IASRemoteAccountingServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'IAS Remote Accounting Servers' objects." ::= { advanced 31 } iasRemoteAccountingServersEntry OBJECT-TYPE SYNTAX IASRemoteAccountingServersEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'IAS Remote Accounting Servers' object." INDEX { ircsInstance } ::= { iasRemoteAccountingServersTable 1 } IASRemoteAccountingServersEntry ::= SEQUENCE { ircsInstance InstanceName, ircsAccountingRequests Gauge32, ircsAccountingRequestsPerSec Gauge32, ircsAccountingResponses Gauge32, ircsAccountingResponsesPerSec Gauge32, ircsBadAuthenticators Gauge32, ircsBadAuthenticatorsPerSec Gauge32, ircsDroppedPackets Gauge32, ircsDroppedPacketsPerSec Gauge32, ircsLastRoundTripTime Gauge32, ircsMalformedPackets Gauge32, ircsMalformedPacketsPerSec Gauge32, ircsPacketsReceived Gauge32, ircsPacketsReceivedPerSec Gauge32, ircsPendingRequests Gauge32, ircsPortNumber Gauge32, ircsRequestTimeouts Gauge32, ircsRequestTimeoutsPerSec Gauge32, ircsRetransmissions Gauge32, ircsRetransmissionsPerSec Gauge32, ircsUnknownType Gauge32, ircsUnknownTypePerSec Gauge32 } ircsInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { iasRemoteAccountingServersEntry 1 } ircsAccountingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Request packets received on the accounting port." ::= { iasRemoteAccountingServersEntry 2 } ircsAccountingRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Accounting-Requests received per second on the accounting port." ::= { iasRemoteAccountingServersEntry 3 } ircsAccountingResponses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Accounting-Response packets sent from this IAS server." ::= { iasRemoteAccountingServersEntry 4 } ircsAccountingResponsesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Accounting-Responses sent per second." ::= { iasRemoteAccountingServersEntry 5 } ircsBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that contain an invalid Message Authenticator attribute." ::= { iasRemoteAccountingServersEntry 6 } ircsBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS packets per second that contain an invalid Message Authenticator attribute." ::= { iasRemoteAccountingServersEntry 7 } ircsDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasRemoteAccountingServersEntry 8 } ircsDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasRemoteAccountingServersEntry 9 } ircsLastRoundTripTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval (in hundredths of a second) between the most recent request from a remote IAS server and its response." ::= { iasRemoteAccountingServersEntry 10 } ircsMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets containing malformed data received." ::= { iasRemoteAccountingServersEntry 11 } ircsMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets containing malformed data received per second." ::= { iasRemoteAccountingServersEntry 12 } ircsPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received." ::= { iasRemoteAccountingServersEntry 13 } ircsPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets received per second." ::= { iasRemoteAccountingServersEntry 14 } ircsPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests destined for this server that have not yet timed out or received a response." ::= { iasRemoteAccountingServersEntry 15 } ircsPortNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port the proxy is using to send requests to this server." ::= { iasRemoteAccountingServersEntry 16 } ircsRequestTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of request timeouts to this server." ::= { iasRemoteAccountingServersEntry 17 } ircsRequestTimeoutsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of request timeouts per second to this server." ::= { iasRemoteAccountingServersEntry 18 } ircsRetransmissions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests retransmitted to this server." ::= { iasRemoteAccountingServersEntry 19 } ircsRetransmissionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of requests retransmitted per second to this server." ::= { iasRemoteAccountingServersEntry 20 } ircsUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unknown type (non-RADIUS) packets received." ::= { iasRemoteAccountingServersEntry 21 } ircsUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of unknown type (non-RADIUS) packets received per second. " ::= { iasRemoteAccountingServersEntry 22 } iasRemoteAuthenticationSrvrTable OBJECT-TYPE SYNTAX SEQUENCE OF IASRemoteAuthenticationServers MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'IAS Remote Authentication Servers' objects." ::= { advanced 32 } iasRemoteAuthenticationSrvrEntry OBJECT-TYPE SYNTAX IASRemoteAuthenticationServers MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'IAS Remote Authentication Servers' object." INDEX { irusInstance } ::= { iasRemoteAuthenticationSrvrTable 1 } IASRemoteAuthenticationServers ::= SEQUENCE { irusInstance InstanceName, irusAccessAccepts Gauge32, irusAccessAcceptsPerSec Gauge32, irusAccessChallenges Gauge32, irusAccessChallengesPerSec Gauge32, irusAccessRejects Gauge32, irusAccessRejectsPerSec Gauge32, irusAccessRequests Gauge32, irusAccessRequestsPerSec Gauge32, irusBadAuthenticators Gauge32, irusBadAuthenticatorsPerSec Gauge32, irusDroppedPackets Gauge32, irusDroppedPacketsPerSec Gauge32, irusLastRoundTripTime Gauge32, irusMalformedPackets Gauge32, irusMalformedPacketsPerSec Gauge32, irusPacketsReceived Gauge32, irusPacketsReceivedPerSec Gauge32, irusPendingRequests Gauge32, irusPortNumber Gauge32, irusRequestTimeouts Gauge32, irusRequestTimeoutsPerSec Gauge32, irusRetransmissions Gauge32, irusRetransmissionsPerSec Gauge32, irusUnknownType Gauge32, irusUnknownTypePerSec Gauge32 } irusInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { iasRemoteAuthenticationSrvrEntry 1 } irusAccessAccepts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Accept packets sent." ::= { iasRemoteAuthenticationSrvrEntry 2 } irusAccessAcceptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Access-Accept packets per second sent." ::= { iasRemoteAuthenticationSrvrEntry 3 } irusAccessChallenges OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Challenge packets sent." ::= { iasRemoteAuthenticationSrvrEntry 4 } irusAccessChallengesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Access-Challenge packets per second sent." ::= { iasRemoteAuthenticationSrvrEntry 5 } irusAccessRejects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS Access-Reject packets sent to this client." ::= { iasRemoteAuthenticationSrvrEntry 6 } irusAccessRejectsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS Access-Reject packets per second sent." ::= { iasRemoteAuthenticationSrvrEntry 7 } irusAccessRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received on the authentication port." ::= { iasRemoteAuthenticationSrvrEntry 8 } irusAccessRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets per second received on the authentication port." ::= { iasRemoteAuthenticationSrvrEntry 9 } irusBadAuthenticators OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RADIUS packets that contain an invalid Message Authenticator attribute." ::= { iasRemoteAuthenticationSrvrEntry 10 } irusBadAuthenticatorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of RADIUS packets per second that contain an invalid Message Authenticator attribute." ::= { iasRemoteAuthenticationSrvrEntry 11 } irusDroppedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of incoming packets that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasRemoteAuthenticationSrvrEntry 12 } irusDroppedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of incoming packets per second that are silently discarded for a reason other than 'malformed,' 'invalid Message Authenticator,' or 'unknown type'." ::= { iasRemoteAuthenticationSrvrEntry 13 } irusLastRoundTripTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interval (in hundredths of a second) between the most recent request from a remote IAS server and its response." ::= { iasRemoteAuthenticationSrvrEntry 14 } irusMalformedPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets containing malformed data received." ::= { iasRemoteAuthenticationSrvrEntry 15 } irusMalformedPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets containing malformed data received per second." ::= { iasRemoteAuthenticationSrvrEntry 16 } irusPacketsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets received." ::= { iasRemoteAuthenticationSrvrEntry 17 } irusPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets received per second." ::= { iasRemoteAuthenticationSrvrEntry 18 } irusPendingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests destined for this server that have not yet timed out or received a response." ::= { iasRemoteAuthenticationSrvrEntry 19 } irusPortNumber OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port the proxy is using to send requests to this server." ::= { iasRemoteAuthenticationSrvrEntry 20 } irusRequestTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of request timeouts to this server." ::= { iasRemoteAuthenticationSrvrEntry 21 } irusRequestTimeoutsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of request timeouts per second to this server." ::= { iasRemoteAuthenticationSrvrEntry 22 } irusRetransmissions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests retransmitted to this server." ::= { iasRemoteAuthenticationSrvrEntry 23 } irusRetransmissionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of requests retransmitted per second to this server." ::= { iasRemoteAuthenticationSrvrEntry 24 } irusUnknownType OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unknown type (non-RADIUS) packets received." ::= { iasRemoteAuthenticationSrvrEntry 25 } irusUnknownTypePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of unknown type (non-RADIUS) packets received per second. " ::= { iasRemoteAuthenticationSrvrEntry 26 } icmpV4 OBJECT-IDENTITY STATUS current DESCRIPTION "The ICMP performance object consists of counters that measure the rates at which Internet Control Message Protocol (ICMP) messages are sent and received by using the ICMP protocol. It also includes counters that monitor ICMP protocol errors." ::= { advanced 33 } icmpV4MessagesOutboundErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Outbound Errors is the number of ICMP messages that were not send due to problems within ICMP, such as lack of buffers. This value does not include errors discovered outside the ICMP layer, such as those recording the failure of IP to route the resultant datagram. In some implementations, none of the error types are included in the value of this counter." ::= { icmpV4 1 } icmpV4MessagesReceivedErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Received Errors is the number of ICMP messages that the entity received but had errors, such as bad ICMP checksums, bad length, etc." ::= { icmpV4 2 } icmpV4MessagesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Received/sec is the rate, in incidents per second at which ICMP messages were received. The rate includes messages received in error." ::= { icmpV4 3 } icmpV4MessagesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Sent/sec is the rate, in incidents per second, at which the server attempted to send. The rate includes those messages sent in error." ::= { icmpV4 4 } icmpV4MessagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages/sec is the total rate, in incidents per second, at which ICMP messages were sent and received by the entity. The rate includes messages received or sent in error." ::= { icmpV4 5 } icmpV4RcvdAddressMask OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Address Mask is the number of ICMP Address Mask Request messages received." ::= { icmpV4 6 } icmpV4RcvdAddressMaskReply OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Address Mask Reply is the number of ICMP Address Mask Reply messages received." ::= { icmpV4 7 } icmpV4RcvdDestUnreachable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Destination Unreachable is the number of ICMP Destination Unreachable messages received." ::= { icmpV4 8 } icmpV4RcvdEchoReplyPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were received." ::= { icmpV4 9 } icmpV4RcvdEchoPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Echo/sec is the rate, in incidents per second, at which ICMP Echo messages were received." ::= { icmpV4 10 } icmpV4RcvdParameterProblem OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Parameter Problem is the number of ICMP Parameter Problem messages received." ::= { icmpV4 11 } icmpV4RcvdRedirectPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were received." ::= { icmpV4 12 } icmpV4RcvdSourceQuench OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Source Quench is the number of ICMP Source Quench messages received." ::= { icmpV4 13 } icmpV4RcvdTimeExceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Time Exceeded is the number of ICMP Time Exceeded messages received." ::= { icmpV4 14 } icmpV4RcvdTimestampReplyPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Timestamp Reply/sec is the rate of ICMP Timestamp Reply messages received." ::= { icmpV4 15 } icmpV4RcvdTimestampPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Timestamp/sec is the rate, in incidents per second at which ICMP Timestamp Request messages were received." ::= { icmpV4 16 } icmpV4SentAddressMask OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Address Mask is the number of ICMP Address Mask Request messages sent." ::= { icmpV4 17 } icmpV4SentAddressMaskReply OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Address Mask Reply is the number of ICMP Address Mask Reply messages sent." ::= { icmpV4 18 } icmpV4SentDestinationUnreachable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Destination Unreachable is the number of ICMP Destination Unreachable messages sent." ::= { icmpV4 19 } icmpV4SentEchoReplyPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were sent." ::= { icmpV4 20 } icmpV4SentEchoPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Echo/sec is the rate of ICMP Echo messages sent." ::= { icmpV4 21 } icmpV4SentParameterProblem OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Parameter Problem is the number of ICMP Parameter Problem messages sent." ::= { icmpV4 22 } icmpV4SentRedirectPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were sent." ::= { icmpV4 23 } icmpV4SentSourceQuench OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Source Quench is the number of ICMP Source Quench messages sent." ::= { icmpV4 24 } icmpV4SentTimeExceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Time Exceeded is the number of ICMP Time Exceeded messages sent." ::= { icmpV4 25 } icmpV4SentTimestampReplyPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Timestamp Reply/sec is the rate, in incidents per second, at which ICMP Timestamp Reply messages were sent." ::= { icmpV4 26 } icmpV4SentTimestampPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Timestamp/sec is the rate, in incidents per second, at which ICMP Timestamp Request messages were sent." ::= { icmpV4 27 } icmpV6 OBJECT IDENTIFIER ::= { advanced 34 } icmpV6MessagesOutboundErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Outbound Errors is the number of ICMP messages that were not send due to problems within ICMP, such as lack of buffers. This value does not include errors discovered outside the ICMP layer, such as those recording the failure of IP to route the resultant datagram. In some implementations, none of the error types are included in the value of this counter." ::= { icmpV6 1 } icmpV6MessagesReceivedErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Received Errors is the number of ICMP messages that the entity received but had errors, such as bad ICMP checksums, bad length, etc." ::= { icmpV6 2 } icmpV6MessagesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Received/sec is the rate, in incidents per second at which ICMP messages were received. The rate includes messages received in error." ::= { icmpV6 3 } icmpV6MessagesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages Sent/sec is the rate, in incidents per second, at which the server attempted to send. The rate includes those messages sent in error." ::= { icmpV6 4 } icmpV6MessagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Messages/sec is the total rate, in incidents per second, at which ICMP messages were sent and received by the entity. The rate includes messages received or sent in error." ::= { icmpV6 5 } icmpV6ReceivedDestUnreachable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Destination Unreachable is the number of ICMP Destination Unreachable messages received." ::= { icmpV6 6 } icmpV6ReceivedEchoReplyPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were received." ::= { icmpV6 7 } icmpV6ReceivedEchoPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Echo/sec is the rate, in incidents per second, at which ICMP Echo messages were received." ::= { icmpV6 8 } icmpV6ReceivedMembershipQuery OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Membership Query is the number of packets received thatquery their membership to a group." ::= { icmpV6 9 } icmpV6ReceivedMembershipReduct OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Membership Reduction is the number of packets received thatcancelled their membership to a group." ::= { icmpV6 10 } icmpV6ReceivedMembershipReport OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Membership Report is the number of packets received thatreport their membership to a group." ::= { icmpV6 11 } icmpV6ReceivedNeighborAdvert OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Neighbor Advert is the number of packets received thatadvert a neighbor." ::= { icmpV6 12 } icmpV6ReceivedNeighborSolicit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Neighbor Solicit is the number of packets received thatsolicit a neighbor." ::= { icmpV6 13 } icmpV6ReceivedPacketTooBig OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Packet Too Big is the number of received packets thatare larger than anticipated." ::= { icmpV6 14 } icmpV6ReceivedParameterProblem OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Parameter Problem is the number of ICMP Parameter Problem messages received." ::= { icmpV6 15 } icmpV6ReceivedRedirectPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were received." ::= { icmpV6 16 } icmpV6ReceivedRouterAdvert OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Router Advert is the number of packets received thatadvert the router." ::= { icmpV6 17 } icmpV6ReceivedRouterSolicit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Router Solicit is the number of packets received thatsolicit the router." ::= { icmpV6 18 } icmpV6ReceivedTimeExceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Received Time Exceeded is the number of ICMP Time Exceeded messages received." ::= { icmpV6 19 } icmpV6SentDestinationUnreachable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Destination Unreachable is the number of ICMP Destination Unreachable messages sent." ::= { icmpV6 20 } icmpV6SentEchoReplyPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Echo Reply/sec is the rate, in incidents per second, at which ICMP Echo Reply messages were sent." ::= { icmpV6 21 } icmpV6SentEchoPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Echo/sec is the rate of ICMP Echo messages sent." ::= { icmpV6 22 } icmpV6SentMembershipQuery OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Membership Query is the number of packets sent thatquery their membership to a group." ::= { icmpV6 23 } icmpV6SentMembershipReduction OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Membership Reduction is the number of packets sent thatcancelled their membership to a group." ::= { icmpV6 24 } icmpV6SentMembershipReport OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Membership Report is the number of packets sent thatreport their membership to a group." ::= { icmpV6 25 } icmpV6SentNeighborAdvert OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Neighbor Advert is the number of packets sent thatadvert a neighbor." ::= { icmpV6 26 } icmpV6SentNeighborSolicit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Neighbor Solicit is the number of packets sent thatsolicit a neighbor." ::= { icmpV6 27 } icmpV6SentPacketTooBig OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Packet Too Big is the number of sent packets thatare larger than anticipated." ::= { icmpV6 28 } icmpV6SentParameterProblem OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Parameter Problem is the number of ICMP Parameter Problem messages sent." ::= { icmpV6 29 } icmpV6SentRedirectPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Redirect/sec is the rate, in incidents per second, at which ICMP Redirect messages were sent." ::= { icmpV6 30 } icmpV6SentRouterAdvert OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Router Advert is the number of packets sent thatadvert the router." ::= { icmpV6 31 } icmpV6SentRouterSolicit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Router Solicit is the number of packets sent thatsolicit the router." ::= { icmpV6 32 } icmpV6SentTimeExceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sent Time Exceeded is the number of ICMP Time Exceeded messages sent." ::= { icmpV6 33 } indexingServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF IndexingServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Indexing Service performance object counters report statistics pertaining to the creation of indexes and the merging and querying of indexes by Indexing Service." ::= { advanced 35 } indexingServiceEntry OBJECT-TYPE SYNTAX IndexingServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Indexing Service' object." INDEX { idxSvcInstance } ::= { indexingServiceTable 1 } IndexingServiceEntry ::= SEQUENCE { idxSvcInstance InstanceName, idxSvcNumDocumentsIndexed Gauge32, idxSvcDeferredForIndexing Gauge32, idxSvcFilesToBeIndexed Gauge32, idxSvcIndexSizeMB Gauge32, idxSvcMergeProgress Gauge32, idxSvcRunningQueries Gauge32, idxSvcSavedIndexes Gauge32, idxSvcTotalNumDocuments Gauge32, idxSvcTotalNumOfQueries Gauge32, idxSvcUniqueKeys Gauge32, idxSvcWordLists Gauge32 } idxSvcInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { indexingServiceEntry 1 } idxSvcNumDocumentsIndexed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of documents indexed since the index was mounted." ::= { indexingServiceEntry 2 } idxSvcDeferredForIndexing OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of files not available and deferred for indexing." ::= { indexingServiceEntry 3 } idxSvcFilesToBeIndexed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of files to be filtered and added to the index." ::= { indexingServiceEntry 4 } idxSvcIndexSizeMB OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of the content index (*.ci files only) in megabytes." ::= { indexingServiceEntry 5 } idxSvcMergeProgress OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percent merge complete for the current merge." ::= { indexingServiceEntry 6 } idxSvcRunningQueries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active query client connections." ::= { indexingServiceEntry 7 } idxSvcSavedIndexes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of saved indexes." ::= { indexingServiceEntry 8 } idxSvcTotalNumDocuments OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of documents in the index." ::= { indexingServiceEntry 9 } idxSvcTotalNumOfQueries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of queries since the index was mounted." ::= { indexingServiceEntry 10 } idxSvcUniqueKeys OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unique keys (words, etc.) in the index." ::= { indexingServiceEntry 11 } idxSvcWordLists OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of word lists." ::= { indexingServiceEntry 12 } indexingServiceFilterTable OBJECT-TYPE SYNTAX SEQUENCE OF IndexingServiceFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index Service Filter object monitors the filtering activity of Indexing Service." ::= { advanced 36 } indexingServiceFilterEntry OBJECT-TYPE SYNTAX IndexingServiceFilterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Indexing Service Filter' object." INDEX { idxSvcFilterInstance } ::= { indexingServiceFilterTable 1 } IndexingServiceFilterEntry ::= SEQUENCE { idxSvcFilterInstance InstanceName, idxSvcFilterBindingTimeMsec Gauge32, idxSvcFilterIdxSpeedMBPerHr Gauge32, idxSvcFilterTotalIdxSpeedMBPerHr Gauge32 } idxSvcFilterInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { indexingServiceFilterEntry 1 } idxSvcFilterBindingTimeMsec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time spent binding to indexing filters." ::= { indexingServiceFilterEntry 2 } idxSvcFilterIdxSpeedMBPerHr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Speed of indexing contents of files in megabytes per hour." ::= { indexingServiceFilterEntry 3 } idxSvcFilterTotalIdxSpeedMBPerHr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Speed of indexing file contents and properties in megabytes per hour." ::= { indexingServiceFilterEntry 4 } internetInformationServiceGlobal OBJECT-IDENTITY STATUS current DESCRIPTION "The Internet Information Services Global performance object consists of counters that apply jointly to the Hypertext Transport Protocol (HTTP) service and File Transfer Protocol (FTP) service." ::= { advanced 37 } iisGlobalActiveFlushedEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Flushed Entries are cached file handles that will be closed when all current transfers complete." ::= { internetInformationServiceGlobal 1 } iisGlobalBLOBCacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "BLOB Cache Flushes since server startup." ::= { internetInformationServiceGlobal 2 } iisGlobalBLOBCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the BLOB cache." ::= { internetInformationServiceGlobal 3 } iisGlobalBLOBCacheHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of BLOB Cache Hits to total cache requests." ::= { internetInformationServiceGlobal 4 } iisGlobalBLOBCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the BLOB cache." ::= { internetInformationServiceGlobal 5 } iisGlobalCurBLOBsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "BLOB information blocks currently in the cache for WWW and FTP services." ::= { internetInformationServiceGlobal 6 } iisGlobalCurBlockAsyncIORequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current requests temporarily blocked due to bandwidth throttling settings." ::= { internetInformationServiceGlobal 7 } iisGlobalCurFileCacheMemUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of bytes used for file cache." ::= { internetInformationServiceGlobal 8 } iisGlobalCurFilesCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of files whose content is in the cache for WWW and FTP services." ::= { internetInformationServiceGlobal 9 } iisGlobalCurURIsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "URI information blocks currently in the cache for WWW and FTP services." ::= { internetInformationServiceGlobal 10 } iisGlobalFileCacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Cache Flushes since server startup." ::= { internetInformationServiceGlobal 11 } iisGlobalFileCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the file cache." ::= { internetInformationServiceGlobal 12 } iisGlobalFileCacheHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of File Cache Hits to total cache requests." ::= { internetInformationServiceGlobal 13 } iisGlobalFileCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the file cache." ::= { internetInformationServiceGlobal 14 } iisGlobalMaxFileCacheMemUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of bytes used for file cache." ::= { internetInformationServiceGlobal 15 } iisGlobalMeasuredAsyncIOBwUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured bandwidth of asynchronous I/O averaged over a minute." ::= { internetInformationServiceGlobal 16 } iisGlobalTotalAllowedAsyncIOReqs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total requests allowed by bandwidth throttling settings (counted since service startup)." ::= { internetInformationServiceGlobal 17 } iisGlobalTotalBLOBsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of BLOB information blocks ever added to the cache for WWW and FTP services" ::= { internetInformationServiceGlobal 18 } iisGlobalTotalBlockAsyncIOReqs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total requests temporarily blocked due to bandwidth throttling settings (counted since service startup)." ::= { internetInformationServiceGlobal 19 } iisGlobalTotalFilesCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of files whose content was ever added to the cache for WWW and FTP services" ::= { internetInformationServiceGlobal 20 } iisGlobalTotalFlushedBLOBs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Flushed BLOBs is the number of BLOB information blocks that have been removed from the cache since service start up." ::= { internetInformationServiceGlobal 21 } iisGlobalTotalFlushedFiles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Flushed Files is the number of file handles that have been removed from the cache since service start up." ::= { internetInformationServiceGlobal 22 } iisGlobalTotalFlushedURIs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Flushed URIs is the number of URI information blocks that have been removed from the cache since service start up." ::= { internetInformationServiceGlobal 23 } iisGlobalTotalRejectedAsyncIOReq OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total requests rejected due to bandwidth throttling settings (counted since service startup)." ::= { internetInformationServiceGlobal 24 } iisGlobalTotalURIsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of URI information blocks ever added to the cache for WWW and FTP services" ::= { internetInformationServiceGlobal 25 } iisGlobalURICacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "URI Cache Flushes since server startup." ::= { internetInformationServiceGlobal 26 } iisGlobalURICacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the URI cache." ::= { internetInformationServiceGlobal 27 } iisGlobalURICacheHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of URI Cache Hits to total cache requests." ::= { internetInformationServiceGlobal 28 } iisGlobalURICacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the URI cache." ::= { internetInformationServiceGlobal 29 } ipV4 OBJECT-IDENTITY STATUS current DESCRIPTION "The Internet Protocol (IP) performance object includes counters that describe the rates at which IP datagrams are transmitted by a computer using the IP protocol. It also describes various error counts for the IP protocol." ::= { advanced 38 } ipV4DatagramsForwardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Forwarded/sec is the rate, in incidents per second, at which attemps were made to find routes to forward input datagrams their final destination, because the local server was not the final IP destination. In servers that do not act as IP Gateways, this rate includes only packets that were source-routed via this entity, where the source-route option processing was successful." ::= { ipV4 1 } ipV4DatagramsOutboundDiscarded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Outbound Discarded is the number of output IP datagrams that were discarded even though no problems were encountered to prevent their transmission to their destination (for example, lack of buffer space). This counter includes datagrams counted in Datagrams Forwarded/sec that meet this criterion." ::= { ipV4 2 } ipV4DatagramsOutboundNoRoute OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Outbound No Route is the number of IP datagrams that were discarded because no route could be found to transmit them to their destination. This counter includes any packets counted in Datagrams Forwarded/sec that meet this `no route' criterion." ::= { ipV4 3 } ipV4DatagramsRcvdAddressErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Address Errors is the number of input datagrams that were discarded because the IP address in their IP header destination field was not valid for the computer. This count includes invalid addresses (for example, 0.0. 0.0) and addresses of unsupported Classes (for example, Class E). For entities that are not IP gateways and do not forward datagrams, this counter includes datagrams that were discarded because the destination address was not a local address." ::= { ipV4 4 } ipV4DatagramsRcvdDeliveredPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Delivered/sec is the rate, in incidents per second, at which input datagrams were successfully delivered to IP user-protocols, including Internet Control Message Protocol (ICMP)." ::= { ipV4 5 } ipV4DatagramsRcvdDiscarded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Discarded is the number of input IP datagrams that were discarded even though problems prevented their continued processing (for example, lack of buffer space). This counter does not include any datagrams discarded while awaiting re-assembly." ::= { ipV4 6 } ipV4DatagramsRcvdHeaderErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Header Errors is the number of input datagrams that were discarded due to errors in the IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { ipV4 7 } ipV4DatagramsRcvdUnknownProtocol OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Unknown Protocol is the number of locally-addressed datagrams that were successfully received but were discarded because of an unknown or unsupported protocol." ::= { ipV4 8 } ipV4DatagramsRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate, in incidents per second, at which IP datagrams are received from the interfaces, including those in error. Datagrams Received/sec is a subset of Datagrams/sec." ::= { ipV4 9 } ipV4DatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate, in incidents per second, at which IP datagrams were supplied for transmission by local IP user-protocols (including ICMP). This counter does not include any datagrams counted in Datagrams Forwarded/sec. Datagrams Sent/sec is a subset of Datagrams/sec." ::= { ipV4 10 } ipV4DatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate, in incidents per second, at which IP datagrams were received from or sent to the interfaces, including those in error. Forwarded datagrams are not included in this rate." ::= { ipV4 11 } ipV4FragmentReassemblyFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragment Re-assembly Failures is the number of failures detected by the IP reassembly algorithm, such as time outs, errors, etc. This is not necessarily a count of discarded IP fragments since some algorithms (notably RFC 815) lose track of the number of fragments by combining them as they are received." ::= { ipV4 12 } ipV4FragmentationFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragmentation Failures is the number of IP datagrams that were discarded because they needed to be fragmented at but could not be (for example, because the `Don't Fragment' flag was set)." ::= { ipV4 13 } ipV4FragmentedDatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragmented Datagrams/sec is the rate, in incidents per second, at which datagrams are successfully fragmented." ::= { ipV4 14 } ipV4FragmentsCreatedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragments Created/sec is the rate, in incidents per second, at which IP datagram fragments were generated as a result of fragmentation." ::= { ipV4 15 } ipV4FragmentsReassembledPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragments Re-assembled/sec is the rate, in incidents per second, at which IP fragments were successfully reassembled." ::= { ipV4 16 } ipV4FragmentsRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragments Received/sec is the rate, in incidents per second, at which IP fragments that need to be reassembled at this entity are received." ::= { ipV4 17 } ipV6 OBJECT IDENTIFIER ::= { advanced 39 } ipV6DatagramsForwardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Forwarded/sec is the rate, in incidents per second, at which attemps were made to find routes to forward input datagrams their final destination, because the local server was not the final IP destination. In servers that do not act as IP Gateways, this rate includes only packets that were source-routed via this entity, where the source-route option processing was successful." ::= { ipV6 1 } ipV6DatagramsOutboundDiscarded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Outbound Discarded is the number of output IP datagrams that were discarded even though no problems were encountered to prevent their transmission to their destination (for example, lack of buffer space). This counter includes datagrams counted in Datagrams Forwarded/sec that meet this criterion." ::= { ipV6 2 } ipV6DatagramsOutboundNoRoute OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Outbound No Route is the number of IP datagrams that were discarded because no route could be found to transmit them to their destination. This counter includes any packets counted in Datagrams Forwarded/sec that meet this `no route' criterion." ::= { ipV6 3 } ipV6DatagramsRcvdAddressErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Address Errors is the number of input datagrams that were discarded because the IP address in their IP header destination field was not valid for the computer. This count includes invalid addresses (for example, 0.0. 0.0) and addresses of unsupported Classes (for example, Class E). For entities that are not IP gateways and do not forward datagrams, this counter includes datagrams that were discarded because the destination address was not a local address." ::= { ipV6 4 } ipV6DatagramsRcvdDeliveredPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Delivered/sec is the rate, in incidents per second, at which input datagrams were successfully delivered to IP user-protocols, including Internet Control Message Protocol (ICMP)." ::= { ipV6 5 } ipV6DatagramsRcvdDiscarded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Discarded is the number of input IP datagrams that were discarded even though problems prevented their continued processing (for example, lack of buffer space). This counter does not include any datagrams discarded while awaiting re-assembly." ::= { ipV6 6 } ipV6DatagramsRcvdHeaderErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Header Errors is the number of input datagrams that were discarded due to errors in the IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc." ::= { ipV6 7 } ipV6DatagramsRcvdUnknownProtocol OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Unknown Protocol is the number of locally-addressed datagrams that were successfully received but were discarded because of an unknown or unsupported protocol." ::= { ipV6 8 } ipV6DatagramsRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate, in incidents per second, at which IP datagrams are received from the interfaces, including those in error. Datagrams Received/sec is a subset of Datagrams/sec." ::= { ipV6 9 } ipV6DatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate, in incidents per second, at which IP datagrams were supplied for transmission by local IP user-protocols (including ICMP). This counter does not include any datagrams counted in Datagrams Forwarded/sec. Datagrams Sent/sec is a subset of Datagrams/sec." ::= { ipV6 10 } ipV6DatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate, in incidents per second, at which IP datagrams were received from or sent to the interfaces, including those in error. Forwarded datagrams are not included in this rate." ::= { ipV6 11 } ipV6FragmentReassemblyFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragment Re-assembly Failures is the number of failures detected by the IP reassembly algorithm, such as time outs, errors, etc. This is not necessarily a count of discarded IP fragments since some algorithms (notably RFC 815) lose track of the number of fragments by combining them as they are received." ::= { ipV6 12 } ipV6FragmentationFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragmentation Failures is the number of IP datagrams that were discarded because they needed to be fragmented at but could not be (for example, because the `Don't Fragment' flag was set)." ::= { ipV6 13 } ipV6FragmentedDatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragmented Datagrams/sec is the rate, in incidents per second, at which datagrams are successfully fragmented." ::= { ipV6 14 } ipV6FragmentsCreatedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragments Created/sec is the rate, in incidents per second, at which IP datagram fragments were generated as a result of fragmentation." ::= { ipV6 15 } ipV6FragmentsReassembledPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragments Re-assembled/sec is the rate, in incidents per second, at which IP fragments were successfully reassembled." ::= { ipV6 16 } ipV6FragmentsRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Fragments Received/sec is the rate, in incidents per second, at which IP fragments that need to be reassembled at this entity are received." ::= { ipV6 17 } ipSecV4Driver OBJECT IDENTIFIER ::= { advanced 40 } is4dActiveSecurityAssociations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active IPSec quick mode security associations." ::= { ipSecV4Driver 1 } is4dOffloadedSecurityAssociation OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active IPSec quick mode security associations offloaded to hardware. Certain network adapters can accelerate IPSec processing by performing hardware offload of IPSec cryptographic functions." ::= { ipSecV4Driver 2 } is4dPendingKeyExchangeOperations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of IPSec key exchange operations that are in progress but are not yet completed." ::= { ipSecV4Driver 3 } is4dTotalBadSPIPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets for which the Security Parameters Index (SPI) was incorrect since the computer was last started. A large number of packets with bad SPIs within a short amount of time might indicate a packet spoofing attack." ::= { ipSecV4Driver 4 } is4dTotalBytesReceivedInTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received using IPSec tunnel mode since the computer was last started." ::= { ipSecV4Driver 5 } is4dTotalBytesSentInTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent using IPSec tunnel mode since the computer was last started." ::= { ipSecV4Driver 6 } is4dTotalOffloadedBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received using IPSec hardware offload since the computer was last started. Certain network adapters can accelerate IPSec processing by performing hardware offload of IPSec cryptographic functions." ::= { ipSecV4Driver 7 } is4dTotalOffloadedBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent using IPSec hardware offload since the computer was last started. Certain network adapters can accelerate IPSec processing by performing hardware offload of IPSec cryptographic functions." ::= { ipSecV4Driver 8 } is4dTotalPktsFailReplayDetection OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that contained an invalid sequence number since the computer was last started. Increases in this counter might indicate a network problem or replay attack." ::= { ipSecV4Driver 9 } is4dTotalPktsNotAuthenticated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets for which data could not be verified (for which the integrity hash verification failed) since the computer was last started. Increases in this counter might indicate an IPSec packet spoofing or modification attack, or packet corruption by network devices." ::= { ipSecV4Driver 10 } is4dTotalPktsNotDecrypted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that could not be decrypted since the computer was last started. A packet might not be decrypted if it fails a validation check." ::= { ipSecV4Driver 11 } is4dTotalSARekeys OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of successful rekey operations for IPSec quick mode security associations since the computer was last started." ::= { ipSecV4Driver 12 } is4dTotalTransportBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received using IPSec transport mode since the computer was last started." ::= { ipSecV4Driver 13 } is4dTotalTransportBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent using IPSec transport mode since the computer was last started." ::= { ipSecV4Driver 14 } ipSecV4IKE OBJECT-IDENTITY STATUS current DESCRIPTION "IPsec IKEv4 is the set of Internet Protocol security (IPsec) Internet Key Exchange (IKE) counters that apply to traffic and connections over Internet Protocol version 4." ::= { advanced 41 } is4iAcquireHeapSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the acquire heap. The acquire heap stores successful acquires. Acquires are outbound requests to establish security associations between IPSec peers." ::= { ipSecV4IKE 1 } is4iMainModeSAListEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of main mode state entries. This counter includes successfully negotiated main modes, main mode negotiations in progress, and main mode negotiations that failed or expired and have not yet been deleted." ::= { ipSecV4IKE 2 } is4iQuickModeSAListEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of quick mode negotiations that are in progress." ::= { ipSecV4IKE 3 } is4iReceiveHeapSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of entries in the Internet Key Exchange (IKE) receive buffers. The receive buffers are used to store incoming IKE messages." ::= { ipSecV4IKE 4 } is4iTotalAuthenticationFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of identity authentication (Kerberos, certificate, and preshared key) failures that occurred during main mode negotiation since the IPSec service was last started." ::= { ipSecV4IKE 5 } is4iTotalMainModeSAs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of successful security associations created during main mode negotiations since the IPSec service was last started." ::= { ipSecV4IKE 6 } is4iTotalNegotiationFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of negotiation failures that occurred during main mode or quick mode negotiation since the IPSec service was last started." ::= { ipSecV4IKE 7 } is4iTotalQuickModeSAs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of successful security associations created during quick mode negotiations since the IPSec service was last started." ::= { ipSecV4IKE 8 } is4iTotalSoftAssociations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of security associations (SAs) formed with computers that did not respond to main mode negotiation attempts (though IPSec policy allowed communications) since the IPSec service was last started. Packets that match soft SAs are not secured by IPSec." ::= { ipSecV4IKE 9 } jobObjectTable OBJECT-TYPE SYNTAX SEQUENCE OF JobObjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Job performance object reports the accounting and processor usage data collected by each active job object. A job object provides a means of managing groups of processes with respect to their processor usage and other factors. For more information about creating and managing job objects, see the Platform SDK link on the Web Resources page at http://windows.microsoft.com/windows2000/reskit /webresources." ::= { advanced 42 } jobObjectEntry OBJECT-TYPE SYNTAX JobObjectEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Job Object' object." INDEX { joInstance } ::= { jobObjectTable 1 } JobObjectEntry ::= SEQUENCE { joInstance InstanceName, joCurrentPercentKernelModeTime Gauge32, joCurrentPercentProcessorTime Gauge32, joCurrentPercentUserModeTime Gauge32, joPagesPerSec Gauge32, joProcessCountActive Gauge32, joProcessCountTerminated Gauge32, joProcessCountTotal Gauge32, joThisPeriodMSecKernelMode Gauge32, joThisPeriodMSecProcessor Gauge32, joThisPeriodMSecUserMode Gauge32, joTotalMSecKernelMode Gauge32, joTotalMSecProcessor Gauge32, joTotalMSecUserMode Gauge32 } joInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { jobObjectEntry 1 } joCurrentPercentKernelModeTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current % Kernel mode Time shows the percentage of the sample interval that the processes in the Job object spent executing code in kernel or privileged mode." ::= { jobObjectEntry 2 } joCurrentPercentProcessorTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current % Processor Time shows the percentage of the sample interval that the processes in the Job object spent executing code." ::= { jobObjectEntry 3 } joCurrentPercentUserModeTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current % User mode Time shows the percentage of the sample interval that the processes in the Job object spent executing code in user mode." ::= { jobObjectEntry 4 } joPagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages/Sec shows the page fault rate of all the processes in the Job object." ::= { jobObjectEntry 5 } joProcessCountActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Process Count - Active shows the number of processes that are currently associated with the Job object." ::= { jobObjectEntry 6 } joProcessCountTerminated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Process Count - Terminated shows the number of processes that have been terminated because of a limit violation." ::= { jobObjectEntry 7 } joProcessCountTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Process Count - Total shows the number of processes, both active and terminated, that are or have been associated with the Job object." ::= { jobObjectEntry 8 } joThisPeriodMSecKernelMode OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This Period mSec - Kernel mode shows the time, in milliseconds, of kernel mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established." ::= { jobObjectEntry 9 } joThisPeriodMSecProcessor OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This Period mSec - Processor shows the time, in milliseconds, of processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established." ::= { jobObjectEntry 10 } joThisPeriodMSecUserMode OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This Period mSec - User mode shows the time, in milliseconds, of user mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since a time limit on the Job was established." ::= { jobObjectEntry 11 } joTotalMSecKernelMode OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total mSec - Kernel mode shows the time, in milliseconds, of kernel mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created." ::= { jobObjectEntry 12 } joTotalMSecProcessor OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total mSec - Processor shows the time, in milliseconds, of processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created." ::= { jobObjectEntry 13 } joTotalMSecUserMode OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total mSec - User mode shows the time, in milliseconds, of user mode processor time used by all the processes in the Job object, including those that have terminated or that are no longer associated with the Job object, since the Job object was created." ::= { jobObjectEntry 14 } jobObjectDetailsTable OBJECT-TYPE SYNTAX SEQUENCE OF JobObjectDetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Job Object Details performance object counters show detailed performance information about the active processes that make up a job object." ::= { advanced 43 } jobObjectDetailsEntry OBJECT-TYPE SYNTAX JobObjectDetailsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Job Object Details' object." INDEX { jodInstance } ::= { jobObjectDetailsTable 1 } JobObjectDetailsEntry ::= SEQUENCE { jodInstance InstanceName, jodPercentPrivilegedTime Gauge32, jodPercentProcessorTime Gauge32, jodPercentUserTime Gauge32, jodCreatingProcessID Gauge32, jodElapsedTime Gauge32, jodHandleCount Gauge32, jodIDProcess Gauge32, jodIODataBytesPerSec Gauge32, jodIODataOperationsPerSec Gauge32, jodIOOtherBytesPerSec Gauge32, jodIOOtherOperationsPerSec Gauge32, jodIOReadBytesPerSec Gauge32, jodIOReadOperationsPerSec Gauge32, jodIOWriteBytesPerSec Gauge32, jodIOWriteOperationsPerSec Gauge32, jodPageFaultsPerSec Gauge32, jodPageFileBytes Gauge32, jodPageFileBytesPeak Gauge32, jodPoolNonpagedBytes Gauge32, jodPoolPagedBytes Gauge32, jodPriorityBase Gauge32, jodPrivateBytes Gauge32, jodThreadCount Gauge32, jodVirtualBytes Gauge32, jodVirtualBytesPeak Gauge32, jodWorkingSet Gauge32, jodWorkingSetPeak Gauge32 } jodInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { jobObjectDetailsEntry 1 } jodPercentPrivilegedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service is called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { jobObjectDetailsEntry 2 } jodPercentProcessorTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Processor Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count." ::= { jobObjectDetailsEntry 3 } jodPercentUserTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% User Time is the percentage of elapsed time that the process threads spent executing code in user mode. Applications, environment subsystems, and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows executive, kernel, and device drivers. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { jobObjectDetailsEntry 4 } jodCreatingProcessID OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Creating Process ID value is the Process ID of the process that created the process. The creating process may have terminated, so this value may no longer identify a running process." ::= { jobObjectDetailsEntry 5 } jodElapsedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total elapsed time, in seconds, that this process has been running." ::= { jobObjectDetailsEntry 6 } jodHandleCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of handles currently open by this process. This number is equal to the sum of the handles currently open by each thread in this process." ::= { jobObjectDetailsEntry 7 } jodIDProcess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID Process is the unique identifier of this process. ID Process numbers are reused, so they only identify a process for the lifetime of that process." ::= { jobObjectDetailsEntry 8 } jodIODataBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is reading and writing bytes in I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 9 } jodIODataOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing read and write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 10 } jodIOOtherBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing bytes to I/O operations that do not involve data such as control operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 11 } jodIOOtherOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing I/O operations that are neither read nor write operations (for example, a control function). This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 12 } jodIOReadBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is reading bytes from I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 13 } jodIOReadOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing read I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 14 } jodIOWriteBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is writing bytes to I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 15 } jodIOWriteOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { jobObjectDetailsEntry 16 } jodPageFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page Faults/sec is the rate at which page faults by the threads executing in this process are occurring. A page fault occurs when a thread refers to a virtual memory page that is not in its working set in main memory. This may not cause the page to be fetched from disk if it is on the standby list and hence already in main memory, or if it is in use by another process with whom the page is shared." ::= { jobObjectDetailsEntry 17 } jodPageFileBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File Bytes is the current amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the current amount of virtual memory that the process has reserved for use in physical memory." ::= { jobObjectDetailsEntry 18 } jodPageFileBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File Bytes Peak is the maximum amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the maximum amount of virtual memory that the process has reserved for use in physical memory." ::= { jobObjectDetailsEntry 19 } jodPoolNonpagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged Bytes is the size, in bytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged Bytes is calculated differently than Process\\Pool Nonpaged Bytes, so it might not equal Process\\Pool Nonpaged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { jobObjectDetailsEntry 20 } jodPoolPagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Bytes is the size, in bytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged Bytes is calculated differently than Process\\Pool Paged Bytes, so it might not equal Process\\Pool Paged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { jobObjectDetailsEntry 21 } jodPriorityBase OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current base priority of this process. Threads within a process can raise and lower their own base priority relative to the process' base priority." ::= { jobObjectDetailsEntry 22 } jodPrivateBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Private Bytes is the current size, in bytes, of memory that this process has allocated that cannot be shared with other processes." ::= { jobObjectDetailsEntry 23 } jodThreadCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread." ::= { jobObjectDetailsEntry 24 } jodVirtualBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual Bytes is the current size, in bytes, of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and the process can limit its ability to load libraries." ::= { jobObjectDetailsEntry 25 } jodVirtualBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual Bytes Peak is the maximum size, in bytes, of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. However, virtual space is finite, and the process might limit its ability to load libraries." ::= { jobObjectDetailsEntry 26 } jodWorkingSet OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set is the current size, in bytes, of the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before leaving main memory." ::= { jobObjectDetailsEntry 27 } jodWorkingSetPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set Peak is the maximum size, in bytes, of the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory." ::= { jobObjectDetailsEntry 28 } logicalDiskTable OBJECT-TYPE SYNTAX SEQUENCE OF LogicalDiskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Logical Disk performance object consists of counters that monitor logical partitions of hard or fixed disk drives. System Monitor identifies logical disks by their drive letter, such as 'C.' To monitor Logical Disk object counters, you must activate them by typing the following at the command prompt: diskperf -yv" ::= { advanced 44 } logicalDiskEntry OBJECT-TYPE SYNTAX LogicalDiskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'LogicalDisk' object." INDEX { lDiskInstance } ::= { logicalDiskTable 1 } LogicalDiskEntry ::= SEQUENCE { lDiskInstance InstanceName, lDiskPercentDiskReadTime Gauge32, lDiskPercentDiskTime Gauge32, lDiskPercentDiskWriteTime Gauge32, lDiskPercentFreeSpace Gauge32, lDiskPercentIdleTime Gauge32, lDiskAvgDiskBytesPerRead Gauge32, lDiskAvgDiskBytesPerTransfer Gauge32, lDiskAvgDiskBytesPerWrite Gauge32, lDiskAvgDiskQueueLength Gauge32, lDiskAvgDiskReadQueueLength Gauge32, lDiskAvgDiskWriteQueueLength Gauge32, lDiskAvgDiskSecPerRead Gauge32, lDiskAvgDiskSecPerTransfer Gauge32, lDiskAvgDiskSecPerWrite Gauge32, lDiskCurrentDiskQueueLength Gauge32, lDiskDiskBytesPerSec Gauge32, lDiskDiskReadBytesPerSec Gauge32, lDiskDiskReadsPerSec Gauge32, lDiskDiskTransfersPerSec Gauge32, lDiskDiskWriteBytesPerSec Gauge32, lDiskDiskWritesPerSec Gauge32, lDiskFreeMegabytes Gauge32, lDiskSplitIOPerSec Gauge32 } lDiskInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { logicalDiskEntry 1 } lDiskPercentDiskReadTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Disk Read Time is the percentage of elapsed time that the selected disk drive was busy servicing read requests." ::= { logicalDiskEntry 2 } lDiskPercentDiskTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Disk Time is the percentage of elapsed time that the selected disk drive was busy servicing read or write requests." ::= { logicalDiskEntry 3 } lDiskPercentDiskWriteTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Disk Write Time is the percentage of elapsed time that the selected disk drive was busy servicing write requests." ::= { logicalDiskEntry 4 } lDiskPercentFreeSpace OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Free Space is the percentage of total usable space on the selected logical disk drive that was free." ::= { logicalDiskEntry 5 } lDiskPercentIdleTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Idle Time reports the percentage of time during the sample interval that the disk was idle." ::= { logicalDiskEntry 6 } lDiskAvgDiskBytesPerRead OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Bytes/Read is the average number of bytes transferred from the disk during read operations." ::= { logicalDiskEntry 7 } lDiskAvgDiskBytesPerTransfer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Bytes/Transfer is the average number of bytes transferred to or from the disk during write or read operations." ::= { logicalDiskEntry 8 } lDiskAvgDiskBytesPerWrite OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Bytes/Write is the average number of bytes transferred to the disk during write operations." ::= { logicalDiskEntry 9 } lDiskAvgDiskQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Queue Length is the average number of both read and write requests that were queued for the selected disk during the sample interval. Multiplied by 1000 to provide a useful gauge value since it is commonly a fractional value." ::= { logicalDiskEntry 10 } lDiskAvgDiskReadQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Read Queue Length is the average number of read requests that were queued for the selected disk during the sample interval. Multiplied by 1000 to provide a useful gauge value since it is commonly a fractional value." ::= { logicalDiskEntry 11 } lDiskAvgDiskWriteQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Write Queue Length is the average number of write requests that were queued for the selected disk during the sample interval. Multiplied by 1000 to provide a useful gauge value since it is commonly a fractional value." ::= { logicalDiskEntry 12 } lDiskAvgDiskSecPerRead OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk sec/Read is the average time, in seconds, of a read of data from the disk. Multiplied by 1000000 to provide a useful gauge value since it is commonly a fractional value." ::= { logicalDiskEntry 13 } lDiskAvgDiskSecPerTransfer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk sec/Transfer is the time, in seconds, of the average disk transfer. Multiplied by 1000000 to provide a useful gauge value since it is commonly a fractional value." ::= { logicalDiskEntry 14 } lDiskAvgDiskSecPerWrite OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk sec/Write is the average time, in seconds, of a write of data to the disk. Multiplied by 1000000 to provide a useful gauge value since it is commonly a fractional value." ::= { logicalDiskEntry 15 } lDiskCurrentDiskQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Disk Queue Length is the number of requests outstanding on the disk at the time the performance data is collected. It also includes requests in service at the time of the collection. This is a instantaneous snapshot, not an average over the time interval. Multi-spindle disk devices can have multiple requests that are active at one time, but other concurrent requests are awaiting service. This counter might reflect a transitory high or low queue length, but if there is a sustained load on the disk drive, it is likely that this will be consistently high. Requests experience delays proportional to the length of this queue minus the number of spindles on the disks. For good performance, this difference should average less than two." ::= { logicalDiskEntry 16 } lDiskDiskBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Bytes/sec is the rate bytes are transferred to or from the disk during write or read operations." ::= { logicalDiskEntry 17 } lDiskDiskReadBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Read Bytes/sec is the rate at which bytes are transferred from the disk during read operations." ::= { logicalDiskEntry 18 } lDiskDiskReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Reads/sec is the rate of read operations on the disk." ::= { logicalDiskEntry 19 } lDiskDiskTransfersPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Transfers/sec is the rate of read and write operations on the disk." ::= { logicalDiskEntry 20 } lDiskDiskWriteBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Write Bytes/sec is rate at which bytes are transferred to the disk during write operations." ::= { logicalDiskEntry 21 } lDiskDiskWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Writes/sec is the rate of write operations on the disk." ::= { logicalDiskEntry 22 } lDiskFreeMegabytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free Megabytes displays the unallocated space, in megabytes, on the disk drive in megabytes. One megabyte is equal to 1,048,576 bytes." ::= { logicalDiskEntry 23 } lDiskSplitIOPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Split IO/Sec reports the rate at which I/Os to the disk were split into multiple I/Os. A split I/O may result from requesting data of a size that is too large to fit into a single I/O or that the disk is fragmented." ::= { logicalDiskEntry 24 } macFileServer OBJECT-IDENTITY STATUS current DESCRIPTION "The MacFile Server performance object provides information about a system running File Server for Macintosh." ::= { advanced 45 } mfsCurrentFilesOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of internal files currently open in the MacFile server. This count does not include files opened on behalf of Macintosh clients." ::= { macFileServer 1 } mfsCurrentNonPagedMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current amount of nonpaged memory resources used by the MacFile Server." ::= { macFileServer 2 } mfsCurrentPagedMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current amount of paged memory resources used by the MacFile Server." ::= { macFileServer 3 } mfsCurrentQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outstanding work items waiting to be processed." ::= { macFileServer 4 } mfsCurrentSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions currently connected to the MacFile server. Indicates current server activity." ::= { macFileServer 5 } mfsCurrentThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of threads used by MacFile server. Indicates how busy the server is." ::= { macFileServer 6 } mfsDataReadPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes read from disk per second." ::= { macFileServer 7 } mfsDataReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received from the network per second. Indicates how busy the server is." ::= { macFileServer 8 } mfsDataTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes sent on the network per second. Indicates how busy the server is." ::= { macFileServer 9 } mfsDataWrittenPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes written to disk per second." ::= { macFileServer 10 } mfsFailedLogons OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed logon attempts to the MacFile server. Can indicate whether password guessing programs are being used to crack the security on the server." ::= { macFileServer 11 } mfsMaxNonPagedMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum amount of nonpaged memory resources use by the MacFile Server." ::= { macFileServer 12 } mfsMaxPagedMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum amount of paged memory resources used by the MacFile Server." ::= { macFileServer 13 } mfsMaximumFilesOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of internal files open at one time in the MacFile server. This count does not include files opened on behalf of Macintosh clients." ::= { macFileServer 14 } mfsMaximumQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of outstanding work items waiting at one time." ::= { macFileServer 15 } mfsMaximumSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of sessions connected at one time to the MacFile server. Indicates usage level of server." ::= { macFileServer 16 } mfsMaximumThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of threads used by MacFile server. Indicates peak usage level of server." ::= { macFileServer 17 } memory OBJECT-IDENTITY STATUS current DESCRIPTION "The Memory performance object consists of counters that describe the behavior of physical and virtual memory on the computer. Physical memory is the amount of random-access memory (RAM) on the computer. Virtual memory consists of space in physical memory and on disk. Many of the memory counters monitor paging, which is the movement of pages of code and data between disk and physical memory. Excessive paging, a symptom of a memory shortage, can cause delays which interfere with all system processes." ::= { advanced 46 } memoryPercentCommittedBytesInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Committed Bytes In Use is the ratio of Memory\\Committed Bytes to the Memory\\Commit Limit. Committed memory is the physical memory in use for which space has been reserved in the paging file should it need to be written to disk. The commit limit is determined by the size of the paging file. If the paging file is enlarged, the commit limit increases, and the ratio is reduced). This counter displays the current percentage value only; it is not an average." ::= { memory 1 } memoryAvailableBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available Bytes is the amount of physical memory, in bytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 2 } memoryAvailableKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available KBytes is the amount of physical memory, in Kilobytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 3 } memoryAvailableMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available MBytes is the amount of physical memory, in Megabytes, immediately available for allocation to a process or for system use. It is equal to the sum of memory assigned to the standby (cached), free and zero page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 4 } memoryCacheBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cache Bytes is the sum of the Memory\\System Cache Resident Bytes, Memory\\System Driver Resident Bytes, Memory\\System Code Resident Bytes, and Memory\\Pool Paged Resident Bytes counters. This counter displays the last observed value only; it is not an average." ::= { memory 5 } memoryCacheBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cache Bytes Peak is the maximum number of bytes used by the file system cache since the system was last restarted. This might be larger than the current size of the cache. This counter displays the last observed value only; it is not an average." ::= { memory 6 } memoryCacheFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cache Faults/sec is the rate at which faults occur when a page sought in the file system cache is not found and must be retrieved from elsewhere in memory (a soft fault) or from disk (a hard fault). The file system cache is an area of physical memory that stores recently used pages of data for applications. Cache activity is a reliable indicator of most application I/O operations. This counter shows the number of faults, without regard for the number of pages faulted in each operation." ::= { memory 7 } memoryCommitLimit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Commit Limit is the amount of virtual memory that can be committed without having to extend the paging file(s). It is measured in bytes. Committed memory is the physical memory which has space reserved on the disk paging files. There can be one paging file on each logical drive). If the paging file(s) are be expanded, this limit increases accordingly. This counter displays the last observed value only; it is not an average." ::= { memory 8 } memoryCommittedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Committed Bytes is the amount of committed virtual memory, in bytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average." ::= { memory 9 } memoryDemandZeroFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Demand Zero Faults/sec is the rate at which a zeroed page is required to satisfy the fault. Zeroed pages, pages emptied of previously stored data and filled with zeros, are a security feature of Windows that prevent processes from seeing data stored by earlier processes that used the memory space. Windows maintains a list of zeroed pages to accelerate this process. This counter shows the number of faults, without regard to the number of pages retrieved to satisfy the fault. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { memory 10 } memoryFreeSystemPageTableEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free System Page Table Entries is the number of page table entries not currently in used by the system. This counter displays the last observed value only; it is not an average." ::= { memory 11 } memoryPageFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page Faults/sec is the average number of pages faulted per second. It is measured in number of pages faulted per second because only one page is faulted in each fault operation, hence this is also equal to the number of page fault operations. This counter includes both hard faults (those that require disk access) and soft faults (where the faulted page is found elsewhere in physical memory.) Most processors can handle large numbers of soft faults without significant consequence. However, hard faults, which require disk access, can cause significant delays." ::= { memory 12 } memoryPageReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page Reads/sec is the rate at which the disk was read to resolve hard page faults. It shows the number of reads operations, without regard to the number of pages retrieved in each operation. Hard page faults occur when a process references a page in virtual memory that is not in working set or elsewhere in physical memory, and must be retrieved from disk. This counter is a primary indicator of the kinds of faults that cause system-wide delays. It includes read operations to satisfy faults in the file system cache (usually requested by applications) and in non-cached mapped memory files. Compare the value of Memory\\Pages Reads/sec to the value of Memory\\Pages Input/sec to determine the average number of pages read during each operation." ::= { memory 13 } memoryPageWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page Writes/sec is the rate at which pages are written to disk to free up space in physical memory. Pages are written to disk only if they are changed while in physical memory, so they are likely to hold data, not code. This counter shows write operations, without regard to the number of pages written in each operation. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { memory 14 } memoryPagesInputPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages Input/sec is the rate at which pages are read from disk to resolve hard page faults. Hard page faults occur when a process refers to a page in virtual memory that is not in its working set or elsewhere in physical memory, and must be retrieved from disk. When a page is faulted, the system tries to read multiple contiguous pages into memory to maximize the benefit of the read operation. Compare the value of Memory\\Pages Input/sec to the value of Memory\\Page Reads/sec to determine the average number of pages read into memory during each read operation." ::= { memory 15 } memoryPagesOutputPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages Output/sec is the rate at which pages are written to disk to free up space in physical memory. Pages are written back to disk only if they are changed in physical memory, so they are likely to hold data, not code. A high rate of pages output might indicate a memory shortage. Windows writes more pages back to disk to free up space when physical memory is in short supply. This counter shows the number of pages, and can be compared to other counts of pages, without conversion." ::= { memory 16 } memoryPagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages/sec is the rate at which pages are read from or written to disk to resolve hard page faults. This counter is a primary indicator of the kinds of faults that cause system-wide delays. It is the sum of Memory\\Pages Input/sec and Memory\\Pages Output/sec. It is counted in numbers of pages, so it can be compared to other counts of pages, such as Memory\\Page Faults/sec, without conversion. It includes pages retrieved to satisfy faults in the file system cache (usually requested by applications) non-cached mapped memory files." ::= { memory 17 } memoryPoolNonpagedAllocs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged Allocs is the number of calls to allocate space in the nonpaged pool. The nonpaged pool is an area of system memory area for objects that cannot be written to disk, and must remain in physical memory as long as they are allocated. It is measured in numbers of calls to allocate space, regardless of the amount of space allocated in each call. This counter displays the last observed value only; it is not an average." ::= { memory 18 } memoryPoolNonpagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged Bytes is the size, in bytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged Bytes is calculated differently than Process\\Pool Nonpaged Bytes, so it might not equal Process\\Pool Nonpaged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { memory 19 } memoryPoolPagedAllocs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Allocs is the number of calls to allocate space in the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. It is measured in numbers of calls to allocate space, regardless of the amount of space allocated in each call. This counter displays the last observed value only; it is not an average." ::= { memory 20 } memoryPoolPagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Bytes is the size, in bytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged Bytes is calculated differently than Process\\Pool Paged Bytes, so it might not equal Process\\Pool Paged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { memory 21 } memoryPoolPagedResidentBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Resident Bytes is the current size, in bytes, of the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Space used by the paged and nonpaged pools are taken from physical memory, so a pool that is too large denies memory space to processes. This counter displays the last observed value only; it is not an average." ::= { memory 22 } memorySystemCacheResidentBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Cache Resident Bytes is the size, in bytes, of the pageable operating system code in the file system cache. This value includes only current physical pages and does not include any virtual memory pages not currently resident. It does equal the System Cache value shown in Task Manager. As a result, this value may be smaller than the actual amount of virtual memory in use by the file system cache. This value is a component of Memory\\System Code Resident Bytes which represents all pageable operating system code that is currently in physical memory. This counter displays the last observed value only; it is not an average." ::= { memory 23 } memorySystemCodeResidentBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Code Resident Bytes is the size, in bytes of the operating system code currently in physical memory that can be written to disk when not in use. This value is a component of Memory\\System Code Total Bytes, which also includes operating system code on disk. Memory\\System Code Resident Bytes (and Memory\\System Code Total Bytes) does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average." ::= { memory 24 } memorySystemCodeTotalBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Code Total Bytes is the size, in bytes, of the pageable operating system code currently in virtual memory. It is a measure of the amount of physical memory being used by the operating system that can be written to disk when not in use. This value is calculated by summing the bytes in Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems loaded by Ntldr/osloader. This counter does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average." ::= { memory 25 } memorySystemDriverResidentBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Driver Resident Bytes is the size, in bytes, of the pageable physical memory being used by device drivers. It is the working set (physical memory area) of the drivers. This value is a component of Memory\\System Driver Total Bytes, which also includes driver memory that has been written to disk. Neither Memory\\System Driver Resident Bytes nor Memory\\System Driver Total Bytes includes memory that cannot be written to disk." ::= { memory 26 } memorySystemDriverTotalBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Driver Total Bytes is the size, in bytes, of the pageable virtual memory currently being used by device drivers. Pageable memory can be written to disk when it is not being used. It includes physical memory (Memory\\System Driver Resident Bytes) and code and data paged to disk. It is a component of Memory\\System Code Total Bytes. This counter displays the last observed value only; it is not an average." ::= { memory 27 } memoryTranFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transition Faults/sec is the rate at which page faults are resolved by recovering pages that were being used by another process sharing the page, or were on the modified page list or the standby list, or were being written to disk at the time of the page fault. The pages were recovered without additional disk activity. Transition faults are counted in numbers of faults; because only one page is faulted in each operation, it is also equal to the number of pages faulted." ::= { memory 28 } memoryTranPagesRePurposedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transition Pages RePurposed is the rate at which the number of transition cache pages were reused for a different purpose. These pages would have otherwise remained in the page cache to provide a (fast) soft fault (instead of retrieving it from backing store) in the event the page was accessed in the future. Note these pages can contain private or sharable memory." ::= { memory 29 } memoryWriteCopiesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Copies/sec is the rate at which page faults are caused by attempts to write that have been satisfied by coping of the page from elsewhere in physical memory. This is an economical way of sharing data since pages are only copied when they are written to; otherwise, the page is shared. This counter shows the number of copies, without regard for the number of pages copied in each operation." ::= { memory 30 } memoryCacheKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cache KiloBytes is the sum of the Memory\\System Cache Resident KiloBytes, Memory\\System Driver Resident KiloBytes, Memory\\System Code Resident KiloBytes, and Memory\\Pool Paged Resident KiloBytes counters. This counter displays the last observed value only; it is not an average. " ::= { memory 31 } memoryCacheKBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cache KiloBytes Peak is the maximum number of kilobytes used by the file system cache since the system was last restarted. This might be larger than the current size of the cache. This counter displays the last observed value only; it is not an average. " ::= { memory 32 } memoryCommittedKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Committed KiloBytes is the amount of committed virtual memory, in kilobytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average." ::= { memory 33 } memoryPoolNonpagedKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged KiloBytes is the size, in kilobytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged KiloBytes is calculated differently than Process\\Pool Nonpaged KiloBytes, so it might not equal Process\\Pool Nonpaged KiloBytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { memory 34 } memoryPoolPagedKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged KiloBytes is the size, in kilobytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged KiloBytes is calculated differently than Process\\Pool Paged KiloBytes, so it might not equal Process\\Pool Paged KiloBytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { memory 35 } memoryPoolPagedResidentKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Resident KiloBytes is the current size, in kilobytes, of the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Space used by the paged and nonpaged pools are taken from physical memory, so a pool that is too large denies memory space to processes. This counter displays the last observed value only; it is not an average." ::= { memory 36 } memorySystemCacheResidentKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Cache Resident KiloBytes is the size, in kilobytes, of the pageable operating system code in the file system cache. This value includes only current physical pages and does not include any virtual memory pages not currently resident. It does equal the System Cache value shown in Task Manager. As a result, this value may be smaller than the actual amount of virtual memory in use by the file system cache. This value is a component of Memory\\System Code Resident KiloBytes which represents all pageable operating system code that is currently in physical memory. This counter displays the last observed value only; it is not an average. " ::= { memory 37 } memorySystemCodeResidentKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Code Resident KiloBytes is the size, in kilobytes of the operating system code currently in physical memory that can be written to disk when not in use. This value is a component of Memory\\System Code Total KiloBytes, which also includes operating system code on disk. Memory\\System Code Resident KiloBytes (and Memory\\System Code Total KiloBytes) does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average." ::= { memory 38 } memorySystemCodeTotalKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Code Total KiloBytes is the size, in kilobytes, of the pageable operating system code currently in virtual memory. It is a measure of the amount of physical memory being used by the operating system that can be written to disk when not in use. This value is calculated by summing the kilobytes in Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems loaded by Ntldr/osloader. This counter does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average." ::= { memory 39 } memorySystemDriverResidentKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Driver Resident KiloBytes is the size, in kilobytes, of the pageable physical memory being used by device drivers. It is the working set (physical memory area) of the drivers. This value is a component of Memory\\System Driver Total KiloBytes, which also includes driver memory that has been written to disk. Neither Memory\\System Driver Resident KiloBytes nor Memory\\System Driver Total KiloBytes includes memory that cannot be written to disk." ::= { memory 40 } memorySystemDriverTotalKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Driver Total KiloBytes is the size, in kilobytes, of the pageable virtual memory currently being used by device drivers. Pageable memory can be written to disk when it is not being used. It includes physical memory (Memory\\System Driver Resident KiloBytes) and code and data paged to disk. It is a component of Memory\\System Code Total KiloBytes. This counter displays the last observed value only; it is not an average. " ::= { memory 41 } memoryCacheMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cache MegaBytes is the sum of the Memory\\System Cache Resident MegaBytes, Memory\\System Driver Resident MegaBytes, Memory\\System Code Resident MegaBytes, and Memory\\Pool Paged Resident MegaBytes counters. This counter displays the last observed value only; it is not an average. " ::= { memory 42 } memoryCacheMBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Cache MegaBytes Peak is the maximum number of megabytes used by the file system cache since the system was last restarted. This might be larger than the current size of the cache. This counter displays the last observed value only; it is not an average. " ::= { memory 43 } memoryCommittedMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Committed MegaBytes is the amount of committed virtual memory, in megabytes. Committed memory is the physical memory which has space reserved on the disk paging file(s). There can be one or more paging files on each physical drive. This counter displays the last observed value only; it is not an average." ::= { memory 44 } memoryPoolNonpagedMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged MegaBytes is the size, in megabytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged MegaBytes is calculated differently than Process\\Pool Nonpaged MegaBytes, so it might not equal Process\\Pool Nonpaged MegaBytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { memory 45 } memoryPoolPagedMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged MegaBytes is the size, in megabytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged MegaBytes is calculated differently than Process\\Pool Paged MegaBytes, so it might not equal Process\\Pool Paged MegaBytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { memory 46 } memoryPoolPagedResidentMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Resident MegaBytes is the current size, in megabytes, of the paged pool. The paged pool is an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Space used by the paged and nonpaged pools are taken from physical memory, so a pool that is too large denies memory space to processes. This counter displays the last observed value only; it is not an average." ::= { memory 47 } memorySystemCacheResidentMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Cache Resident MegaBytes is the size, in megabytes, of the pageable operating system code in the file system cache. This value includes only current physical pages and does not include any virtual memory pages not currently resident. It does equal the System Cache value shown in Task Manager. As a result, this value may be smaller than the actual amount of virtual memory in use by the file system cache. This value is a component of Memory\\System Code Resident MegaBytes which represents all pageable operating system code that is currently in physical memory. This counter displays the last observed value only; it is not an average. " ::= { memory 48 } memorySystemCodeResidentMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Code Resident MegaBytes is the size, in megabytes of the operating system code currently in physical memory that can be written to disk when not in use. This value is a component of Memory\\System Code Total MegaBytes, which also includes operating system code on disk. Memory\\System Code Resident MegaBytes (and Memory\\System Code Total MegaBytes) does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average." ::= { memory 49 } memorySystemCodeTotalMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Code Total MegaBytes is the size, in megabytes, of the pageable operating system code currently in virtual memory. It is a measure of the amount of physical memory being used by the operating system that can be written to disk when not in use. This value is calculated by summing the megabytes in Ntoskrnl.exe, Hal.dll, the boot drivers, and file systems loaded by Ntldr/osloader. This counter does not include code that must remain in physical memory and cannot be written to disk. This counter displays the last observed value only; it is not an average." ::= { memory 50 } memorySystemDriverResidentMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Driver Resident MegaBytes is the size, in megabytes, of the pageable physical memory being used by device drivers. It is the working set (physical memory area) of the drivers. This value is a component of Memory\\System Driver Total MegaBytes, which also includes driver memory that has been written to disk. Neither Memory\\System Driver Resident MegaBytes nor Memory\\System Driver Total MegaBytes includes memory that cannot be written to disk." ::= { memory 51 } memorySystemDriverTotalMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Driver Total MegaBytes is the size, in megabytes, of the pageable virtual memory currently being used by device drivers. Pageable memory can be written to disk when it is not being used. It includes physical memory (Memory\\System Driver Resident MegaBytes) and code and data paged to disk. It is a component of Memory\\System Code Total MegaBytes. This counter displays the last observed value only; it is not an average. " ::= { memory 52 } memoryFreeZeroPageListBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free & Zero Page List Bytes is the amount of physical memory, in bytes, that is assigned to the free and zero page lists. This memory does not contain cached data. It is immediately available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 53 } memoryFreeZeroPageListKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free & Zero Page List KiloBytes is the amount of physical memory, in kilobytes, that is assigned to the free and zero page lists. This memory does not contain cached data. It is immediately available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 54 } memoryFreeZeroPageListMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free & Zero Page List MegaBytes is the amount of physical memory, in megabytes, that is assigned to the free and zero page lists. This memory does not contain cached data. It is immediately available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 55 } memoryModifiedPageListBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modified Page List Bytes is the amount of physical memory, in bytes, that is assigned to the modified page list. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. This memory needs to be written out before it will be available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 56 } memoryModifiedPageListKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modified Page List KiloBytes is the amount of physical memory, in kilobytes, that is assigned to the modified page list. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. This memory needs to be written out before it will be available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 57 } memoryModifiedPageListMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Modified Page List MegaBytes is the amount of physical memory, in megabytes, that is assigned to the modified page list. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. This memory needs to be written out before it will be available for allocation to a process or for system use. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 58 } memoryStbyCacheCoreBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Core Bytes is the amount of physical memory, in bytes, that is assigned to the core standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 59 } memoryStbyCacheCoreKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Core KiloBytes is the amount of physical memory, in kilobytes, that is assigned to the core standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 60 } memoryStbyCacheCoreMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Core MegaBytes is the amount of physical memory, in megabytes, that is assigned to the core standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 61 } memoryStbyCacheNormPriorityBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Normal Priority Bytes is the amount of physical memory, in bytes, that is assigned to the normal priority standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 62 } memoryStbyCacheNormPriorityKByte OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Normal Priority KiloBytes is the amount of physical memory, in kilobytes, that is assigned to the normal priority standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 63 } memoryStbyCacheNormPriorityMByte OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Normal Priority MegaBytes is the amount of physical memory, in megabytes, that is assigned to the normal priority standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 64 } memoryStbyCacheReserveBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Reserve Bytes is the amount of physical memory, in bytes, that is assigned to the reserve standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 65 } memoryStbyCacheReserveKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Reserve KiloBytes is the amount of physical memory, in kilobytes, that is assigned to the reserve standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 66 } memoryStbyCacheReserveMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Standby Cache Reserve MegaBytes is the amount of physical memory, in megabytes, that is assigned to the reserve standby cache page lists. This memory contains cached data and code that is not actively in use by processes, the system and the system cache. It is immediately available for allocation to a process or for system use. If the system runs out of available free and zero memory, memory on lower priority standby cache page lists will be repurposed before memory on higher priority standby cache page lists. For a full explanation of the memory manager, refer to MSDN and/or the System Performance and Troubleshooting Guide chapter in the Windows Server 2003 Resource Kit." ::= { memory 67 } memoryTransPagesRePurposedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transition Pages RePurposed is the rate at which the number of transition cache pages were reused for a different purpose. These pages would have otherwise remained in the page cache to provide a (fast) soft fault (instead of retrieving it from backing store) in the event the page was accessed in the future. Note these pages can contain private or sharable memory." ::= { memory 68 } memoryCommitLimitKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Commit Limit is the amount of virtual memory that can be committed without having to extend the paging file(s). It is measured in kilobytes. Committed memory is the physical memory which has space reserved on the disk paging files. There can be one paging file on each logical drive). If the paging file(s) are be expanded, this limit increases accordingly. This counter displays the last observed value only; it is not an average." ::= { memory 69 } memoryCommitLimitMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Commit Limit is the amount of virtual memory that can be committed without having to extend the paging file(s). It is measured in megabytes. Committed memory is the physical memory which has space reserved on the disk paging files. There can be one paging file on each logical drive). If the paging file(s) are be expanded, this limit increases accordingly. This counter displays the last observed value only; it is not an average." ::= { memory 70 } msmqQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF MSMQQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MSMQ Queue performance object monitors message statistics for a selected queue. There are instances for each queue on the computer. In addition, if an Message Queuing-based application has a private queue open on another computer, an instance for that queue is also available. The computer queues instance represents the computer's source journal and dead letter queues." ::= { advanced 47 } msmqQueueEntry OBJECT-TYPE SYNTAX MSMQQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'MSMQ Queue' object." INDEX { msmqInstance } ::= { msmqQueueTable 1 } MSMQQueueEntry ::= SEQUENCE { msmqInstance InstanceName, msmqBytesInJournalQueue Gauge32, msmqBytesInQueue Gauge32, msmqMessagesInJournalQueue Gauge32, msmqMessagesInQueue Gauge32 } msmqInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { msmqQueueEntry 1 } msmqBytesInJournalQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes that currently reside in the journal queue. For the computer queues instance, this represents the computer journal queue." ::= { msmqQueueEntry 2 } msmqBytesInQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes that currently reside in the queue. For the computer queues instance, this represents the dead letter queue." ::= { msmqQueueEntry 3 } msmqMessagesInJournalQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages that currently reside in the journal queue. For the computer queues instance, this represents the computer journal queue." ::= { msmqQueueEntry 4 } msmqMessagesInQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages that currently reside in the queue. For the computer queues instance, this represents the dead letter queue." ::= { msmqQueueEntry 5 } msmqService OBJECT-IDENTITY STATUS current DESCRIPTION "The MSMQ Service performance object monitors session and message statistics for a selected computer that is running Message Queuing." ::= { advanced 48 } msmqSvcIPSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of open IP sessions." ::= { msmqService 1 } msmqSvcIPXSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of open IPX sessions." ::= { msmqService 2 } msmqSvcIncomingMessagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of incoming MSMQ messages handled by the MSMQ service." ::= { msmqService 3 } msmqSvcMSMQIncomingMessages OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of incoming messages handled by the MSMQ service." ::= { msmqService 4 } msmqSvcMSMQOutgoingMessages OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outgoing messages handled by the MSMQ service." ::= { msmqService 5 } msmqSvcOutgoingMessagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of outgoing MSMQ messages handled by the MSMQ service." ::= { msmqService 6 } msmqSvcSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of open network sessions." ::= { msmqService 7 } msmqSvcTotalBytesInAllQueues OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes in all active queues under the MSMQ service." ::= { msmqService 8 } msmqSvcTotalMessagesInAllQueues OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages in all active queues under the MSMQ service." ::= { msmqService 9 } msmqSvcIncomingMulticastSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of open incoming multicast sessions involving the selected computer." ::= { msmqService 10 } msmqSvcOutgoingHTTPSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of open outgoing HTTP sessions involving the selected computer." ::= { msmqService 11 } msmqSvcOutgoingMulticastSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of open outgoing multicast sessions involving the selected computer." ::= { msmqService 12 } nbtConnectionTable OBJECT-TYPE SYNTAX SEQUENCE OF NBTConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NBT Connection performance object consists of counters that measure the rates at which bytes are sent and received over the NetBIOS over TCP/IP (NetBT or NBT) protocol provides NetBIOS support for the TCP/IP protocol. NBT connection between the local computer and a remote computer. The connection is identified by the name of the remote computer." ::= { advanced 49 } nbtConnectionEntry OBJECT-TYPE SYNTAX NBTConnectionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NBT Connection' object." INDEX { nbtConnectionInstance } ::= { nbtConnectionTable 1 } NBTConnectionEntry ::= SEQUENCE { nbtConnectionInstance InstanceName, nbtConnectionBytesReceivedPerSec Gauge32, nbtConnectionBytesSentPerSec Gauge32, nbtConnectionBytesTotalPerSec Gauge32 } nbtConnectionInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { nbtConnectionEntry 1 } nbtConnectionBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Received/sec is the rate at which bytes are received by the local computer over an NBT connection to some remote computer. All the bytes received by the local computer over the particular NBT connection are counted." ::= { nbtConnectionEntry 2 } nbtConnectionBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Sent/sec is the rate at which bytes are sent by the local computer over an NBT connection to some remote computer. All the bytes sent by the local computer over the particular NBT connection are counted." ::= { nbtConnectionEntry 3 } nbtConnectionBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the rate at which bytes are sent or received by the local computer over an NBT connection to some remote computer. All the bytes sent or received by the local computer over the particular NBT connection are counted." ::= { nbtConnectionEntry 4 } netBEUITable OBJECT-TYPE SYNTAX SEQUENCE OF NetBEUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NetBEUI performance object consists of counters that measure data transmission for network activity which conforms to the NetBIOS End User Interface (NetBEUI) standard." ::= { advanced 50 } netBEUIEntry OBJECT-TYPE SYNTAX NetBEUIEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NetBEUI' object." INDEX { netBEUIInstance } ::= { netBEUITable 1 } NetBEUIEntry ::= SEQUENCE { netBEUIInstance InstanceName, netBEUIBytesTotalPerSec Gauge32, netBEUIConnectionSessionTimeouts Gauge32, netBEUIConnectionsCanceled Gauge32, netBEUIConnectionsNoRetries Gauge32, netBEUIConnectionsOpen Gauge32, netBEUIConnectionsWithRetries Gauge32, netBEUIDatagramBytesRcvdPerSec Gauge32, netBEUIDatagramBytesSentPerSec Gauge32, netBEUIDatagramBytesPerSec Gauge32, netBEUIDatagramsReceivedPerSec Gauge32, netBEUIDatagramsSentPerSec Gauge32, netBEUIDatagramsPerSec Gauge32, netBEUIDisconnectsLocal Gauge32, netBEUIDisconnectsRemote Gauge32, netBEUIExpirationsAck Gauge32, netBEUIExpirationsResponse Gauge32, netBEUIFailuresAdapter Gauge32, netBEUIFailuresLink Gauge32, netBEUIFailuresNoListen Gauge32, netBEUIFailuresNotFound Gauge32, netBEUIFailuresResourceLocal Gauge32, netBEUIFailuresResourceRemote Gauge32, netBEUIFrameBytesReSentPerSec Gauge32, netBEUIFrameBytesReceivedPerSec Gauge32, netBEUIFrameBytesRejectedPerSec Gauge32, netBEUIFrameBytesSentPerSec Gauge32, netBEUIFrameBytesPerSec Gauge32, netBEUIFramesReSentPerSec Gauge32, netBEUIFramesReceivedPerSec Gauge32, netBEUIFramesRejectedPerSec Gauge32, netBEUIFramesSentPerSec Gauge32, netBEUIFramesPerSec Gauge32, netBEUIPacketsReceivedPerSec Gauge32, netBEUIPacketsSentPerSec Gauge32, netBEUIPacketsPerSec Gauge32, netBEUIPiggybackAckQueuedPerSec Gauge32, netBEUIPiggybackAckTimeouts Gauge32, netBEUIWindowSendAverage Gauge32, netBEUIWindowSendMaximum Gauge32 } netBEUIInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { netBEUIEntry 1 } netBEUIBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data." ::= { netBEUIEntry 2 } netBEUIConnectionSessionTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total." ::= { netBEUIEntry 3 } netBEUIConnectionsCanceled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total." ::= { netBEUIEntry 4 } netBEUIConnectionsNoRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total." ::= { netBEUIEntry 5 } netBEUIConnectionsOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time." ::= { netBEUIEntry 6 } netBEUIConnectionsWithRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total." ::= { netBEUIEntry 7 } netBEUIDatagramBytesRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { netBEUIEntry 8 } netBEUIDatagramBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { netBEUIEntry 9 } netBEUIDatagramBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { netBEUIEntry 10 } netBEUIDatagramsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { netBEUIEntry 11 } netBEUIDatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { netBEUIEntry 12 } netBEUIDatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { netBEUIEntry 13 } netBEUIDisconnectsLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total." ::= { netBEUIEntry 14 } netBEUIDisconnectsRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total." ::= { netBEUIEntry 15 } netBEUIExpirationsAck OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Ack is the count of T2 timer expirations." ::= { netBEUIEntry 16 } netBEUIExpirationsResponse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Response is the count of T1 timer expirations." ::= { netBEUIEntry 17 } netBEUIFailuresAdapter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total." ::= { netBEUIEntry 18 } netBEUIFailuresLink OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total." ::= { netBEUIEntry 19 } netBEUIFailuresNoListen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests." ::= { netBEUIEntry 20 } netBEUIFailuresNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total." ::= { netBEUIEntry 21 } netBEUIFailuresResourceLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total." ::= { netBEUIEntry 22 } netBEUIFailuresResourceRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total." ::= { netBEUIEntry 23 } netBEUIFrameBytesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data." ::= { netBEUIEntry 24 } netBEUIFrameBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data." ::= { netBEUIEntry 25 } netBEUIFrameBytesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data." ::= { netBEUIEntry 26 } netBEUIFrameBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data." ::= { netBEUIEntry 27 } netBEUIFrameBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data." ::= { netBEUIEntry 28 } netBEUIFramesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data." ::= { netBEUIEntry 29 } netBEUIFramesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data." ::= { netBEUIEntry 30 } netBEUIFramesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data." ::= { netBEUIEntry 31 } netBEUIFramesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data." ::= { netBEUIEntry 32 } netBEUIFramesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data." ::= { netBEUIEntry 33 } netBEUIPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets." ::= { netBEUIEntry 34 } netBEUIPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets." ::= { netBEUIEntry 35 } netBEUIPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets." ::= { netBEUIEntry 36 } netBEUIPiggybackAckQueuedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer." ::= { netBEUIEntry 37 } netBEUIPiggybackAckTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented." ::= { netBEUIEntry 38 } netBEUIWindowSendAverage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer." ::= { netBEUIEntry 39 } netBEUIWindowSendMaximum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer." ::= { netBEUIEntry 40 } netBEUIResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF NetBEUIResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NetBEUI Resource performance object consists of counters that track the use of buffers by the NetBEUI protocol." ::= { advanced 51 } netBEUIResourceEntry OBJECT-TYPE SYNTAX NetBEUIResourceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NetBEUI Resource' object." INDEX { netBEUIResourceInstance } ::= { netBEUIResourceTable 1 } NetBEUIResourceEntry ::= SEQUENCE { netBEUIResourceInstance InstanceName, netBEUIResourceTimesExhausted Gauge32, netBEUIResourceUsedAverage Gauge32, netBEUIResourceUsedMaximum Gauge32 } netBEUIResourceInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { netBEUIResourceEntry 1 } netBEUIResourceTimesExhausted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Times Exhausted is the number of times all the resources (buffers) were in use. The number in parentheses following the resource name is used to identify the resource in Event Log messages." ::= { netBEUIResourceEntry 2 } netBEUIResourceUsedAverage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used Average is the current number of resources (buffers) in use at this time. The number in parentheses following the resource name is used to identify the resource in Event Log messages." ::= { netBEUIResourceEntry 3 } netBEUIResourceUsedMaximum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Used Maximum is the maximum number of NetBEUI resources (buffers) in use at any point in time. This value is useful in sizing the maximum resources provided. The number in parentheses following the resource name is used to identify the resource in Event Log messages." ::= { netBEUIResourceEntry 4 } networkInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF NetworkInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Network Interface performance object consists of counters that measure the rates at which bytes and packets are sent and received over a TCP/IP connection. It includes counters that monitor connection errors. The Network Interface counters display data about the network adapters on the server computer. The first instance of the Network Interface object (Instance 1) that you see in System Monitor represents the loopback. The loopback is a local path through the protocol driver and the network adapter. All other instances represent installed network adapters." ::= { advanced 52 } networkInterfaceEntry OBJECT-TYPE SYNTAX NetworkInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Network Interface' object." INDEX { netInstance } ::= { networkInterfaceTable 1 } NetworkInterfaceEntry ::= SEQUENCE { netInstance InstanceName, netBytesReceivedPerSec Gauge32, netBytesSentPerSec Gauge32, netBytesTotalPerSec Gauge32, netCurrentBandwidth Gauge32, netOutputQueueLength Gauge32, netPacketsOutboundDiscarded Gauge32, netPacketsOutboundErrors Gauge32, netPacketsReceivedDiscarded Gauge32, netPacketsReceivedErrors Gauge32, netPacketsRcvdNonUnicastPerSec Gauge32, netPacketsReceivedUnicastPerSec Gauge32, netPacketsReceivedUnknown Gauge32, netPacketsReceivedPerSec Gauge32, netPacketsSentNonUnicastPerSec Gauge32, netPacketsSentUnicastPerSec Gauge32, netPacketsSentPerSec Gauge32, netPacketsPerSec Gauge32 } netInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { networkInterfaceEntry 1 } netBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Received/sec is the rate at which bytes are received over each network adapter, including framing characters. Network Interface\Bytes Received/sec is a subset of Network Interface\Bytes Total/sec." ::= { networkInterfaceEntry 2 } netBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Sent/sec is the rate at which bytes are sent over each network adapter, including framing characters. Network Interface\Bytes Sent/sec is a subset of Network Interface\Bytes Total/sec." ::= { networkInterfaceEntry 3 } netBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the rate at which bytes are sent and received over each network adapter, including framing characters. Network Interface\Bytes Total/sec is a sum of Network Interface\Bytes Received/sec and Network Interface\Bytes Sent/sec." ::= { networkInterfaceEntry 4 } netCurrentBandwidth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Bandwidth is an estimate of the current bandwidth of the network interface in bits per second (BPS). For interfaces that do not vary in bandwidth or for those where no accurate estimation can be made, this value is the nominal bandwidth." ::= { networkInterfaceEntry 5 } netOutputQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Output Queue Length is the length of the output packet queue (in packets). If this is longer than two, there are delays and the bottleneck should be found and eliminated, if possible. Since the requests are queued by the Network Driver Interface Specification (NDIS) in this implementation, this will always be 0." ::= { networkInterfaceEntry 6 } netPacketsOutboundDiscarded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Outbound Discarded is the number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent transmission. One possible reason for discarding packets could be to free up buffer space." ::= { networkInterfaceEntry 7 } netPacketsOutboundErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Outbound Errors is the number of outbound packets that could not be transmitted because of errors." ::= { networkInterfaceEntry 8 } netPacketsReceivedDiscarded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received Discarded is the number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their delivery to a higher-layer protocol. One possible reason for discarding packets could be to free up buffer space." ::= { networkInterfaceEntry 9 } netPacketsReceivedErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received Errors is the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol." ::= { networkInterfaceEntry 10 } netPacketsRcvdNonUnicastPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received Non-Unicast/sec is the rate at which non-unicast (subnet broadcast or subnet multicast) packets are delivered to a higher-layer protocol." ::= { networkInterfaceEntry 11 } netPacketsReceivedUnicastPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received Unicast/sec is the rate at which (subnet) unicast packets are delivered to a higher-layer protocol." ::= { networkInterfaceEntry 12 } netPacketsReceivedUnknown OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received Unknown is the number of packets received through the interface that were discarded because of an unknown or unsupported protocol." ::= { networkInterfaceEntry 13 } netPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which packets are received on the network interface." ::= { networkInterfaceEntry 14 } netPacketsSentNonUnicastPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent Non-Unicast/sec is the rate at which packets are requested to be transmitted to non-unicast (subnet broadcast or subnet multicast) addresses by higher-level protocols. The rate includes the packets that were discarded or not sent." ::= { networkInterfaceEntry 15 } netPacketsSentUnicastPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent Unicast/sec is the rate at which packets are requested to be transmitted to subnet-unicast addresses by higher-level protocols. The rate includes the packets that were discarded or not sent." ::= { networkInterfaceEntry 16 } netPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent/sec is the rate at which packets are sent on the network interface." ::= { networkInterfaceEntry 17 } netPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets/sec is the rate at which packets are sent and received on the network interface." ::= { networkInterfaceEntry 18 } nntpCommandsTable OBJECT-TYPE SYNTAX SEQUENCE OF NNTPCommandsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NNTP Commands performance object includes counters for all NNTP commands processed by the Network News Transport Protocol (NNTP) service, which is installed as an optional component of Internet Information Services. NNTP counters are started for each virtual server instance and are reset to zero when the virtual server is started. A single NNTP service can have many virtual servers (also called sites)." ::= { advanced 53 } nntpCommandsEntry OBJECT-TYPE SYNTAX NNTPCommandsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NNTP Commands' object." INDEX { nntpCmdsInstance } ::= { nntpCommandsTable 1 } NNTPCommandsEntry ::= SEQUENCE { nntpCmdsInstance InstanceName, nntpCmdsArticleCmds Gauge32, nntpCmdsArticleCmdsPerSec Gauge32, nntpCmdsCheckCmds Gauge32, nntpCmdsCheckCmdsPerSec Gauge32, nntpCmdsGroupCmds Gauge32, nntpCmdsGroupCmdsPerSec Gauge32, nntpCmdsHelpCmds Gauge32, nntpCmdsHelpCmdsPerSec Gauge32, nntpCmdsIHaveCmds Gauge32, nntpCmdsIHaveCmdsPerSec Gauge32, nntpCmdsLastCmds Gauge32, nntpCmdsLastCmdsPerSec Gauge32, nntpCmdsListCmds Gauge32, nntpCmdsListCmdsPerSec Gauge32, nntpCmdsLogonAttempts Gauge32, nntpCmdsLogonAttemptsPerSec Gauge32, nntpCmdsLogonFailures Gauge32, nntpCmdsLogonFailuresPerSec Gauge32, nntpCmdsModeCmds Gauge32, nntpCmdsModeCmdsPerSec Gauge32, nntpCmdsNewgroupsCmds Gauge32, nntpCmdsNewgroupsCmdsPerSec Gauge32, nntpCmdsNewnewsCmds Gauge32, nntpCmdsNewnewsCmdsPerSec Gauge32, nntpCmdsNextCmds Gauge32, nntpCmdsNextCmdsPerSec Gauge32, nntpCmdsPostCmds Gauge32, nntpCmdsPostCmdsPerSec Gauge32, nntpCmdsQuitCmds Gauge32, nntpCmdsQuitCmdsPerSec Gauge32, nntpCmdsSearchCmds Gauge32, nntpCmdsSearchCmdsPerSec Gauge32, nntpCmdsStatCmds Gauge32, nntpCmdsStatCmdsPerSec Gauge32, nntpCmdsTakethisCmds Gauge32, nntpCmdsTakethisCmdsPerSec Gauge32, nntpCmdsXHdrCmds Gauge32, nntpCmdsXHdrCmdsPerSec Gauge32, nntpCmdsXOverCmds Gauge32, nntpCmdsXOverCmdsPerSec Gauge32, nntpCmdsXPatCmds Gauge32, nntpCmdsXPatCmdsPerSec Gauge32, nntpCmdsXReplicCmds Gauge32, nntpCmdsXReplicCmdsPerSec Gauge32 } nntpCmdsInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { nntpCommandsEntry 1 } nntpCmdsArticleCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Article Commands is the number of ARTICLE commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 2 } nntpCmdsArticleCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Article Commands/Sec is the number of ARTICLE commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 3 } nntpCmdsCheckCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Check Commands is the number of CHECK commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 4 } nntpCmdsCheckCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Check Commands/Sec is the number of CHECK commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 5 } nntpCmdsGroupCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Group Commands is the number of GROUP commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 6 } nntpCmdsGroupCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Group Commands/Sec is the number of GROUP commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 7 } nntpCmdsHelpCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Help Commands is the number of HELP commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 8 } nntpCmdsHelpCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Help Commands/Sec is the number of HELP commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 9 } nntpCmdsIHaveCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IHave Commands is the number of IHAVE commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 10 } nntpCmdsIHaveCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IHave Commands/Sec is the number of IHAVE commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 11 } nntpCmdsLastCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last Commands is the number of LAST commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 12 } nntpCmdsLastCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Last Commands/Sec is the number of LAST commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 13 } nntpCmdsListCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "List Commands is the number of LIST commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 14 } nntpCmdsListCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "List Commands/Sec is the number of LIST commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 15 } nntpCmdsLogonAttempts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Logon Attempts is the number of logon attempts that have been made to the NNTP Server." ::= { nntpCommandsEntry 16 } nntpCmdsLogonAttemptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Logon Attempts/Sec is the number of logon attempts per sec that have been made to the NNTP Server." ::= { nntpCommandsEntry 17 } nntpCmdsLogonFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Logon Failures is the number of logons that had failed." ::= { nntpCommandsEntry 18 } nntpCmdsLogonFailuresPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Logon Failures/Sec is the number of logons per sec that had failed." ::= { nntpCommandsEntry 19 } nntpCmdsModeCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mode Commands is the number of MODE commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 20 } nntpCmdsModeCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mode Commands/Sec is the number of MODE commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 21 } nntpCmdsNewgroupsCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Newgroups Commands is the number of NEWGROUPS commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 22 } nntpCmdsNewgroupsCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Newgroups Commands/Sec is the number of NEWGROUPS commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 23 } nntpCmdsNewnewsCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Newnews Commands is the number of NEWNEWS commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 24 } nntpCmdsNewnewsCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Newnews Commands/Sec is the number of NEWNEWS commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 25 } nntpCmdsNextCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next Commands is the number of NEXT commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 26 } nntpCmdsNextCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Next Commands/Sec is the number of NEXT commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 27 } nntpCmdsPostCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Post Commands is the number of POST commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 28 } nntpCmdsPostCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Post Commands/Sec is the number of POST commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 29 } nntpCmdsQuitCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Quit Commands is the number of QUIT commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 30 } nntpCmdsQuitCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Quit Commands/Sec is the number of QUIT commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 31 } nntpCmdsSearchCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Search Commands is the number of SEARCH commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 32 } nntpCmdsSearchCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Search Commands/Sec is the number of SEARCH commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 33 } nntpCmdsStatCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stat Commands is the number of STAT commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 34 } nntpCmdsStatCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Stat Commands/Sec is the number of STAT commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 35 } nntpCmdsTakethisCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Takethis Commands is the number of TAKETHIS commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 36 } nntpCmdsTakethisCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Takethis Commands/Sec is the number of TAKETHIS commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 37 } nntpCmdsXHdrCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XHdr Commands is the number of XHDR commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 38 } nntpCmdsXHdrCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XHdr Commands/Sec is the number of XHDR commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 39 } nntpCmdsXOverCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XOver Commands is the number of XOVER commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 40 } nntpCmdsXOverCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XOver Commands/Sec is the number of XOVER commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 41 } nntpCmdsXPatCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XPat Commands is the number of XPAT commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 42 } nntpCmdsXPatCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XPat Commands/Sec is the number of XPAT commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 43 } nntpCmdsXReplicCmds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XReplic Commands is the number of XREPLIC commands received by the NNTP Server since it was started." ::= { nntpCommandsEntry 44 } nntpCmdsXReplicCmdsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XReplic Commands/Sec is the number of XREPLIC commands per sec received by the NNTP Server since it was started." ::= { nntpCommandsEntry 45 } nntpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NNTPServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NNTP Server performance object monitors posting, authentication, and connection activity on an NNTP server. The Network News Transport Protocol (NNTP) service is an optional component of Internet Information Services. NNTP counters are started for each virtual server instance and are reset to zero when the virtual server is started. A single NNTP service can have many virtual servers (also called sites)." ::= { advanced 54 } nntpServerEntry OBJECT-TYPE SYNTAX NNTPServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NNTP Server' object." INDEX { nntpSrvrInstance } ::= { nntpServerTable 1 } NNTPServerEntry ::= SEQUENCE { nntpSrvrInstance InstanceName, nntpSrvrArticleMapEntries Gauge32, nntpSrvrArticleMapEntriesPerSec Gauge32, nntpSrvrArticlesDeleted Gauge32, nntpSrvrArticlesDeletedPerSec Gauge32, nntpSrvrArticlesPosted Gauge32, nntpSrvrArticlesPostedPerSec Gauge32, nntpSrvrArticlesReceived Gauge32, nntpSrvrArticlesReceivedPerSec Gauge32, nntpSrvrArticlesSent Gauge32, nntpSrvrArticlesSentPerSec Gauge32, nntpSrvrArticlesTotal Gauge32, nntpSrvrBytesReceivedPerSec Gauge32, nntpSrvrBytesSentPerSec Gauge32, nntpSrvrBytesTotalPerSec Gauge32, nntpSrvrControlMessagesFailed Gauge32, nntpSrvrControlMessagesReceived Gauge32, nntpSrvrCurrentAnonymousUsers Gauge32, nntpSrvrCurrentConnections Gauge32, nntpSrvrCurrentNonAnonymousUsers Gauge32, nntpSrvrCurrentOutboundConns Gauge32, nntpSrvrFailedOutboundLogons Gauge32, nntpSrvrHistoryMapEntries Gauge32, nntpSrvrHistoryMapEntriesPerSec Gauge32, nntpSrvrMaximumAnonymousUsers Gauge32, nntpSrvrMaximumConnections Gauge32, nntpSrvrMaximumNonAnonymousUsers Gauge32, nntpSrvrModeratedPostingsFailed Gauge32, nntpSrvrModeratedPostingsSent Gauge32, nntpSrvrSessionsFlowControlled Gauge32, nntpSrvrTotalAnonymousUsers Gauge32, nntpSrvrTotalConnections Gauge32, nntpSrvrTotalNonAnonymousUsers Gauge32, nntpSrvrTotalOutboundConnections Gauge32, nntpSrvrTotalOutboundConnsFailed Gauge32, nntpSrvrTotalPassiveFeeds Gauge32, nntpSrvrTotalPullFeeds Gauge32, nntpSrvrTotalPushFeeds Gauge32, nntpSrvrTotalSSLConnections Gauge32, nntpSrvrXoverEntries Gauge32, nntpSrvrXoverEntriesPerSec Gauge32 } nntpSrvrInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { nntpServerEntry 1 } nntpSrvrArticleMapEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Article Map Entries is the entries inserted into the article mapping table of the NNTP Server." ::= { nntpServerEntry 2 } nntpSrvrArticleMapEntriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Article Map Entries/Sec is the entries inserted per sec into the article mapping table of the NNTP Server." ::= { nntpServerEntry 3 } nntpSrvrArticlesDeleted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Deleted is the number of articles deleted on the NNTP Server since it was started." ::= { nntpServerEntry 4 } nntpSrvrArticlesDeletedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Deleted/Sec is the number of articles deleted per sec on the NNTP Server since it was started." ::= { nntpServerEntry 5 } nntpSrvrArticlesPosted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Posted is the number of articles posted to the NNTP Server." ::= { nntpServerEntry 6 } nntpSrvrArticlesPostedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Posted/Sec is the number of articles posted per sec to the NNTP Server." ::= { nntpServerEntry 7 } nntpSrvrArticlesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Received is the total number of files received by the NNTP Server." ::= { nntpServerEntry 8 } nntpSrvrArticlesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Received/Sec is the total number of files per sec received by the NNTP Server." ::= { nntpServerEntry 9 } nntpSrvrArticlesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Sent is the total number of files sent by the NNTP Server." ::= { nntpServerEntry 10 } nntpSrvrArticlesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Sent/Sec is the total number of files sent per sec by the NNTP Server." ::= { nntpServerEntry 11 } nntpSrvrArticlesTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Articles Total is the sum of Articles Sent and Articles Received. This is the total number of files transferred by the NNTP Server." ::= { nntpServerEntry 12 } nntpSrvrBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Received/sec is the rate that data bytes are received by the NNTP Server." ::= { nntpServerEntry 13 } nntpSrvrBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Sent/sec is the rate that data bytes are sent by the NNTP Server." ::= { nntpServerEntry 14 } nntpSrvrBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the sum of Bytes Sent/sec and Bytes Received/sec. This is the total rate of bytes transferred by the NNTP Server." ::= { nntpServerEntry 15 } nntpSrvrControlMessagesFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Control Messages Failed is the total number of control messages failed or not applied by the NNTP Server." ::= { nntpServerEntry 16 } nntpSrvrControlMessagesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Control Messages Received is the total number of control messages received by the NNTP Server." ::= { nntpServerEntry 17 } nntpSrvrCurrentAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Anonymous Users is the number of anonymous users currently connected to the NNTP Server." ::= { nntpServerEntry 18 } nntpSrvrCurrentConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connections is the current number of connections to the NNTP Server." ::= { nntpServerEntry 19 } nntpSrvrCurrentNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current NonAnonymous Users is the number of nonanonymous users currently connected to the NNTP Server." ::= { nntpServerEntry 20 } nntpSrvrCurrentOutboundConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Outbound Connections is the number of current outbound connections being made by the NNTP Server." ::= { nntpServerEntry 21 } nntpSrvrFailedOutboundLogons OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failed Outbound Logons is the number of failed outbound logons made by the NNTP Server." ::= { nntpServerEntry 22 } nntpSrvrHistoryMapEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "History Map Entries is the entries inserted into the history mapping table of the NNTP Server." ::= { nntpServerEntry 23 } nntpSrvrHistoryMapEntriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "History Map Entries/Sec is the entries inserted per sec into the history mapping table of the NNTP Server." ::= { nntpServerEntry 24 } nntpSrvrMaximumAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Anonymous Users is the maximum number of anonymous users simultaneously connected to the NNTP Server." ::= { nntpServerEntry 25 } nntpSrvrMaximumConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Connections is the maximum number of simultaneous connections to the NNTP Server." ::= { nntpServerEntry 26 } nntpSrvrMaximumNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum NonAnonymous Users is the maximum number of nonanonymous users simultaneously connected to the NNTP Server." ::= { nntpServerEntry 27 } nntpSrvrModeratedPostingsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Moderated Postings Failed is the total number of moderated postings the NNTP Server fails to send to an SMTP Server." ::= { nntpServerEntry 28 } nntpSrvrModeratedPostingsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Moderated Postings Sent is the total number of moderated postings the NNTP Server attempts to send to an SMTP Server." ::= { nntpServerEntry 29 } nntpSrvrSessionsFlowControlled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sessions Flow Control is the number of client sessions currently in a flow controlled state in the NNTP Server." ::= { nntpServerEntry 30 } nntpSrvrTotalAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Anonymous Users is the total number of anonymous users that have ever connected to the NNTP Server." ::= { nntpServerEntry 31 } nntpSrvrTotalConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Connections is the number of connections that have been made to the NNTP Server." ::= { nntpServerEntry 32 } nntpSrvrTotalNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total NonAnonymous Users is the total number of nonanonymous users that have ever connected to the NNTP Server." ::= { nntpServerEntry 33 } nntpSrvrTotalOutboundConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Outbound Connections is the number of outbound connections that have been made by the NNTP Server." ::= { nntpServerEntry 34 } nntpSrvrTotalOutboundConnsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Outbound Connections Failed is the number of unsucessful outbound connections that have been made by the NNTP Server." ::= { nntpServerEntry 35 } nntpSrvrTotalPassiveFeeds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Passive Feeds is the number of passive feeds accepted by the NNTP Server." ::= { nntpServerEntry 36 } nntpSrvrTotalPullFeeds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Pull Feeds is the number of pull feeds made by the NNTP Server." ::= { nntpServerEntry 37 } nntpSrvrTotalPushFeeds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Push Feeds is the number of push feeds made by the NNTP Server." ::= { nntpServerEntry 38 } nntpSrvrTotalSSLConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total SSL Connections is the number of SSL connections that have been made to the NNTP Server." ::= { nntpServerEntry 39 } nntpSrvrXoverEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Xover Entries is the number of xover entries in the xover table table of the NNTP Server." ::= { nntpServerEntry 40 } nntpSrvrXoverEntriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Xover Entries/Sec is the number of xover entries inserted per sec in the xover table table of the NNTP Server." ::= { nntpServerEntry 41 } ntds OBJECT-IDENTITY STATUS current DESCRIPTION "The NTDS object provides statistics about the activity of Active Directory." ::= { advanced 55 } ntdsABANRPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which Address Book clients perform Ambiguous Name Resolutions operations." ::= { ntds 1 } ntdsABBrowsesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AB Browses/sec is the rate at which Address Book clients perform browse operations." ::= { ntds 2 } ntdsABClientSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AB Client Sessions is the number of connected Address Book client sessions." ::= { ntds 3 } ntdsABMatchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which Address Book clients perform find operations." ::= { ntds 4 } ntdsABPropertyReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which Address Book clients perform property read operations." ::= { ntds 5 } ntdsABProxyLookupsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which proxy clients perform search operations." ::= { ntds 6 } ntdsABSearchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which Address Book clients perform key search operations." ::= { ntds 7 } ntdsATQThreadsLDAP OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of threads that ATQ has currently allocated to servicing LDAP requests." ::= { ntds 8 } ntdsATQThreadsOther OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of threads that the ATQ has currently allocated to DS services other than LDAP." ::= { ntds 9 } ntdsATQThreadsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ATQ threads that are either waiting to service an incoming request, or are already servicing a request." ::= { ntds 10 } ntdsDRAHighestUSNCommitHighPart OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "High-order 32 bits of the highest USN Committed on the DSA." ::= { ntds 11 } ntdsDRAHighestUSNCommitLowPart OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low-order 32 bits of the highest USN Committed on the DSA." ::= { ntds 12 } ntdsDRAHighestUSNIssuedHighPart OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "High-order 32 bits of the highest USN Issued on the DSA." ::= { ntds 13 } ntdsDRAHighestUSNIssuedLowPart OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Low-order 32 bits of the highest USN Issued on the DSA." ::= { ntds 14 } ntdsDRAInboundBytesCBSACSBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Compressed size in bytes of inbound compressed replication data (size after compression, from DSAs in other sites)." ::= { ntds 15 } ntdsDRAInboundBytesCBSACPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Compressed size in bytes of inbound compressed replication data (size after compression, from DSAs in other sites)." ::= { ntds 16 } ntdsDRAInboundBytesCBSBCSBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Original size in bytes of inbound compressed replication data (size before compression, from DSAs in other sites)." ::= { ntds 17 } ntdsDRAInboundBytesCBSBCPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Original size in bytes of inbound compressed replication data (size before compression, from DSAs in other sites)." ::= { ntds 18 } ntdsDRAInboundBytesNotCWSSBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes replicated in that were not compressed at the source (i.e., from DSAs in the same site)." ::= { ntds 19 } ntdsDRAInboundBytesNotCWSPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes replicated in that were not compressed at the source (i.e., from DSAs in the same site)." ::= { ntds 20 } ntdsDRAInboundBytesTotalBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes replicated in. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression)." ::= { ntds 21 } ntdsDRAInboundBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes replicated in. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression)." ::= { ntds 22 } ntdsDRAInboundFullSyncObjsRemain OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of objects remaining until the full sync completes (when set)." ::= { ntds 23 } ntdsDRAInboundObjUpdsRemainInPkt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of object updates received in the current directory replication update packet that have not yet been applied to the local server." ::= { ntds 24 } ntdsDRAInboundObjsAppliedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which replication updates received from replication partners are applied by the local directory service. This count excludes changes that are received but not applied (e.g., when the change is already present). This indicates how much replication update activity is occuring on the server as a result of changes generated on other servers." ::= { ntds 25 } ntdsDRAInboundObjsFilteredPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of objects received from inbound replication partners that contained no updates that needed to be applied." ::= { ntds 26 } ntdsDRAInboundObjectsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of objects received from neighbors through inbound replication." ::= { ntds 27 } ntdsDRAInboundPropAppliedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of properties that are updated due to incoming property winning the reconciliation logic." ::= { ntds 28 } ntdsDRAInboundPropFilteredPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of property changes that are received during the replication that we have already seen." ::= { ntds 29 } ntdsDRAInboundPropTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of object properties received from inbound replication partners." ::= { ntds 30 } ntdsDRAInboundValuesDNsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of object property values received from inbound replication partners that are Distinguished Names; i.e., that reference other objects. DN-values, such as group or distribution list memberships, are generally more expensive to apply than other kinds of values." ::= { ntds 31 } ntdsDRAInboundValuesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of object property values received from inbound replication partners. Each inbound object has one or more properties, and each property has zero or more values. Zero values indicates property removal." ::= { ntds 32 } ntdsDRAOutboundBytesCBSACSBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Compressed size in bytes of outbound compressed replication data (size after compression, from DSAs in other sites)." ::= { ntds 33 } ntdsDRAOutboundBytesCBSACPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Compressed size in bytes of outbound compressed replication data (size after compression, from DSAs in other sites)." ::= { ntds 34 } ntdsDRAOutboundBytesCBSBCSBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Original size in bytes of outbound compressed replication data (size before compression, from DSAs in other sites)." ::= { ntds 35 } ntdsDRAOutboundBytesCBSBCPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Original size in bytes of outbound compressed replication data (size before compression, from DSAs in other sites)." ::= { ntds 36 } ntdsDRAOutboundBytesNotCWSSBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes replicated out that were not compressed (i.e., from DSAs in the same site)." ::= { ntds 37 } ntdsDRAOutboundBytesNotCWSPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes replicated out that were not compressed (i.e., from DSAs in the same site)." ::= { ntds 38 } ntdsDRAOutboundBytesTotalBoot OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes replicated out. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression)." ::= { ntds 39 } ntdsDRAOutboundBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes replicated out. Sum of the number of uncompressed bytes (never compressed) and the number of compressed bytes (after compression)." ::= { ntds 40 } ntdsDRAOutboundObjsFilterPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of objects looked at by outbound replication that were determined to have no updates that the outbound partner did not already have." ::= { ntds 41 } ntdsDRAOutboundObjectsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of objects replicated out." ::= { ntds 42 } ntdsDRAOutboundPropertiesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of properties replicated out." ::= { ntds 43 } ntdsDRAOutboundValuesDNsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of object property values containing Distinguished Names sent to outbound replication partners. DN-values, such as group or distribution list memberships, are generally more expensive to read than other kinds of values." ::= { ntds 44 } ntdsDRAOutboundValuesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of object property values sent to outbound replication partners." ::= { ntds 45 } ntdsDRAPendingReplicationSync OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "DRA Pending Replication Synchronizations is the number of directory synchronizations that are queued for this server but not yet processed." ::= { ntds 46 } ntdsDRASyncFailOnSchemaMismatch OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of sync requests made to the neighbors that failed because their schema are out of sync." ::= { ntds 47 } ntdsDRASyncRequestsMade OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of sync requests made to the neighbors." ::= { ntds 48 } ntdsDRASyncRequestsSuccessful OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "No of sync requests made to the neighbors that successfully returned." ::= { ntds 49 } ntdsDSPercentReadsOther OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads not coming from SAM/DRA/LDAP/LSA/XDS/KCC/NSPI." ::= { ntds 50 } ntdsDSPercentReadsFromDRA OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads coming from DRA." ::= { ntds 51 } ntdsDSPercentReadsFromKCC OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads coming from KCC." ::= { ntds 52 } ntdsDSPercentReadsFromLSA OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads coming from LSA." ::= { ntds 53 } ntdsDSPercentReadsFromNSPI OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads coming from NSPI." ::= { ntds 54 } ntdsDSPercentReadsFromSAM OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads coming from SAM." ::= { ntds 55 } ntdsDSPercentReadsFromXDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads coming from XDS." ::= { ntds 56 } ntdsDSPercentSearchesOther OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches not coming from SAM/DRA/LDAP/LSA/XDS/KCC/NSPI." ::= { ntds 57 } ntdsDSPercentSearchesFromDRA OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from DRA." ::= { ntds 58 } ntdsDSPercentSearchesFromKCC OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from KCC." ::= { ntds 59 } ntdsDSPercentSearchesFromLDAP OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from LDAP." ::= { ntds 60 } ntdsDSPercentSearchesFromLSA OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from LSA." ::= { ntds 61 } ntdsDSPercentSearchesFromNSPI OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from NSPI." ::= { ntds 62 } ntdsDSPercentSearchesFromSAM OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from SAM." ::= { ntds 63 } ntdsDSPercentSearchesFromXDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from XDS." ::= { ntds 64 } ntdsDSPercentWritesOther OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes not coming from SAM/DRA/LDAP/LSA/XDS/KCC/NSPI." ::= { ntds 65 } ntdsDSPercentWritesFromDRA OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from DRA." ::= { ntds 66 } ntdsDSPercentWritesFromKCC OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from KCC." ::= { ntds 67 } ntdsDSPercentWritesFromLDAP OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from LDAP." ::= { ntds 68 } ntdsDSPercentWritesFromLSA OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from LSA." ::= { ntds 69 } ntdsDSPercentWritesFromNSPI OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from NSPI." ::= { ntds 70 } ntdsDSPercentWritesFromSAM OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from SAM." ::= { ntds 71 } ntdsDSPercentWritesFromXDS OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from XDS." ::= { ntds 72 } ntdsDSClientBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ntdsapi.dll binds per second serviced by this DC." ::= { ntds 73 } ntdsDSClientNameTranslatePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ntdsapi.dll name translations per second serviced by this DC." ::= { ntds 74 } ntdsDSDirectoryReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of directory reads per second." ::= { ntds 75 } ntdsDSDirectorySearchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of directory searches per second." ::= { ntds 76 } ntdsDSDirectoryWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of directory writes per second." ::= { ntds 77 } ntdsDSMonitorListSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests to be notified when objects are updated that are currently registered with this DSA." ::= { ntds 78 } ntdsDSNameCacheHitRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of directory object name component look ups that are satisfied out of the DSA's name cache." ::= { ntds 79 } ntdsDSNotifyQueueSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of pending update notifications that have been queued, but not yet transmitted to clients." ::= { ntds 80 } ntdsDSSearchSuboperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of search suboperations per second. One search operation is made up of many sub operations. A sub operation roughly corresponds to an object the search causes the DS to consider." ::= { ntds 81 } ntdsDSSecurityDescPropEvents OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "DS Security Descriptor Propagations Events is the number of Security Descriptor Propagation Events that are queued but not yet processed." ::= { ntds 82 } ntdsDSSecurityDescPropAvgExTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average length of time the Security Descriptor propagator spends waiting for exclusive access to Data Base elements during a Security Descriptor Propagation sub-operation." ::= { ntds 83 } ntdsDSSecurityDescPropRunQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of objects remaining to examine while processing the current DS Security Descriptor Propagator Event." ::= { ntds 84 } ntdsDSSecurityDescSubopPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Security Descriptor Propagation suboperations per second. One Security Descriptor Propagation operation is made up of many sub operations. A sub operation roughly corresponds to an object the propagation causes the propagator to examine." ::= { ntds 85 } ntdsDSServerBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DC-to-DC binds per second serviced by this DC." ::= { ntds 86 } ntdsDSServerNameTranslatePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DC-to-DC name translations per second serviced by this DC." ::= { ntds 87 } ntdsDSThreadsInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "DS Threads in Use is the current number of threads in use by the directory service (different than the number of threads in the directory service process). Threads in Use is the number of threads currently servicing client API calls and can be used to indicate whether additional processors could be of benefit." ::= { ntds 88 } ntdsKDCASRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of AS requests serviced by the KDC per second. AS requests are used by client to obtain a ticket granting ticket." ::= { ntds 89 } ntdsKDCTGSRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TGS requests serviced by the KDC per second. TGS requests are used by the client to obtain a ticket to a resource." ::= { ntds 90 } ntdsKerberosAuthentications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times per second that clients use a ticket to this DC to authenticate to this DC." ::= { ntds 91 } ntdsLDAPActiveThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP Active Threads is the current number of threads in use by the LDAP subsystem of the local direcotry service." ::= { ntds 92 } ntdsLDAPBindTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time (in milliseconds) taken for last successful LDAP bind." ::= { ntds 93 } ntdsLDAPClientSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP Client Sessions is the number of connected LDAP client sessions." ::= { ntds 94 } ntdsLDAPSearchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP Searches/sec is the rate at which LDAP clients perform search operations." ::= { ntds 95 } ntdsLDAPSuccessfulBinds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of LDAP bind attempts that were successful." ::= { ntds 96 } ntdsLDAPSuccessfulBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LDAP Binds per second." ::= { ntds 97 } ntdsLDAPUDPOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDP operations the LDAP server is processing per second." ::= { ntds 98 } ntdsLDAPWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP Writes/sec is the rate at which LDAP clients perform write operations." ::= { ntds 99 } ntdsNTLMAuthentications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of NTLM authentications per second serviced by this DC." ::= { ntds 100 } ntdsSAMAccountGroupMemEvalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SAM Account Group Membership Evaluations per second." ::= { ntds 101 } ntdsSAMDisplayInfoQueriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of queries per second to obtain display information (netquerydisplayinformation)." ::= { ntds 102 } ntdsSAMEnumerationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of net user, net group, and net local function enumerations per second." ::= { ntds 103 } ntdsSAMGCEvaluationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of universal group membership evaluations per second on a global catalog domain controller from non-global catalog domain controllers." ::= { ntds 104 } ntdsSAMMachineCreateAtpsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of attempts per second to create computer accounts." ::= { ntds 105 } ntdsSAMMembershipChangesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of group membership changes per second across all global, universal, and nested groups." ::= { ntds 106 } ntdsSAMNonTransMemEvalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of net user and new local groups evaluations per second when performing a non-transitive membership evaluation." ::= { ntds 107 } ntdsSAMPasswordChangesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SAM password changes per second." ::= { ntds 108 } ntdsSAMResourceGrpMemEvalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of SAM Resource Group Membership Evaluations per second." ::= { ntds 109 } ntdsSAMSuccessMachineCreatPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful machine creations per second." ::= { ntds 110 } ntdsSAMSuccessUserCreatePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of user accounts successfully created per second." ::= { ntds 111 } ntdsSAMTransitiveMembEvalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of new groups encountered per second when performing a transitive membership evaluation. Evaluations are performed at authentication time and when computer accounts or attributes are created." ::= { ntds 112 } ntdsSAMUniversalGrpMemEvalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of universal group membership evaluations per second at authentication time." ::= { ntds 113 } ntdsSAMUserCreateAttemptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of attempts per second to create user accounts." ::= { ntds 114 } ntdsXDSClientSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "XDS Client Sessions is the number of connected Extended Directory Service client sessions. This indicates the number of connections from other Windows NT services and the Windows NT Administrator program." ::= { ntds 115 } ntdsDRAInLnkValUpdsRemainInPckt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of link value updates received in the current directory replication update packet that have not yet been applied to the local server." ::= { ntds 116 } ntdsDRAInTotalUpdsRemainInPacket OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of total (link values + object) updates received in the current directory replication update packet that have not yet been applied to the local server." ::= { ntds 117 } ntdsDRAPendReplicationOps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of replication operations on the directory that are queued for this server but not yet performed." ::= { ntds 118 } ntdsDRAThreadsGettingNCChanges OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of threads on the server which are currently attempting to acquire changes from another server." ::= { ntds 119 } ntdsDRAThdsGetNCChngsHoldSmphr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of threads on the server which are currently attempting to acquire changes from another server and hold a semaphore required to get these changes." ::= { ntds 120 } ntdsDSPercentReadsFromNTDSAPI OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory reads coming from NTDAPI calls." ::= { ntds 121 } ntdsDSPercentSearchesFromNTDSAPI OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory searches coming from NTDAPI calls." ::= { ntds 122 } ntdsDSPercentWritesFromNTDSAPI OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% of directory writes coming from NTDSAPI calls." ::= { ntds 123 } ntdsLDAPClosedConnectionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LDAP connections that have been closed in the last second." ::= { ntds 124 } ntdsLDAPNewConnectionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of new LDAP connections that have arrived in the last second." ::= { ntds 125 } ntdsLDAPNewSSLConnectionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of new SSL or TLS connections that arrived in the last second." ::= { ntds 126 } ntdsSAMAccountGroupEvalLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean latency of the last 100 account and universal group evaluations performed for authentication." ::= { ntds 127 } ntdsSAMResourceGroupEvalLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The mean latency of the last 100 resource group evaluations performed for authentication." ::= { ntds 128 } ntdsATQEstimatedQueueDelay OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated time (in milliseconds) the next request will spend in the queue prior to being serviced by the directory service." ::= { ntds 129 } ntdsATQOutstandingQueuedRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests currently queued and waiting to be serviced." ::= { ntds 130 } ntdsATQRequestLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average length of time (in milliseconds) to process a request, not including time spent on the queue." ::= { ntds 131 } ntdsBaseSearchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of base searches/sec" ::= { ntds 132 } ntdsDatabaseAddsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of database adds/sec" ::= { ntds 133 } ntdsDatabaseDeletesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of database deletes/sec" ::= { ntds 134 } ntdsDatabaseModifysPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of database modifys/sec" ::= { ntds 135 } ntdsDigestBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of digest binds/sec" ::= { ntds 136 } ntdsExternalBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of external binds/sec" ::= { ntds 137 } ntdsFastBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of fast binds/sec" ::= { ntds 138 } ntdsLinkValuesCleanedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which link values that need to be cleaned are cleaned." ::= { ntds 139 } ntdsNTLMBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of NTLM binds/sec" ::= { ntds 140 } ntdsNegotiatedBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of negotiated binds/sec" ::= { ntds 141 } ntdsOnelevelSearchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of onelevel searches/sec" ::= { ntds 142 } ntdsPhantomsCleanedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which stale phantoms are cleaned." ::= { ntds 143 } ntdsPhantomsVisitedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which phantoms are visited to determine if they are stale and need to be cleaned." ::= { ntds 144 } ntdsSAMDomLocGrpMembEvalsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of domain local group memberships evaluations per second at authentication time." ::= { ntds 145 } ntdsSAMGlbGrpMembpEvalsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of domain global group membership evaluations per second at authentication time." ::= { ntds 146 } ntdsSAMSuccessCompCreationPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter displays the number of successful computer accounts created per second." ::= { ntds 147 } ntdsSimpleBindsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of simple binds/sec" ::= { ntds 148 } ntdsSubtreeSearchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of subtree searches/sec" ::= { ntds 149 } ntdsTombstonesGarbageCollPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which expired tombstoned objects are garbage collected." ::= { ntds 150 } ntdsTombstonesVisitedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which tombstoned objects are visited to be considered for garbage collected." ::= { ntds 151 } nwLinkIPXTable OBJECT-TYPE SYNTAX SEQUENCE OF NWLinkIPXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NWLink IPX performance object consists of counters that measure datagram transmission to and from computers using the IPX protocol. This object only reports valid data for counters that monitor datagrams and packets; for frame-related counters, the object tends to report zero values. In addition, connection-related data is not likely to be useful because IPX is a connectionless protocol." ::= { advanced 56 } nwLinkIPXEntry OBJECT-TYPE SYNTAX NWLinkIPXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NWLink IPX' object." INDEX { ipxInstance } ::= { nwLinkIPXTable 1 } NWLinkIPXEntry ::= SEQUENCE { ipxInstance InstanceName, ipxBytesTotalPerSec Gauge32, ipxConnectionSessionTimeouts Gauge32, ipxConnectionsCanceled Gauge32, ipxConnectionsNoRetries Gauge32, ipxConnectionsOpen Gauge32, ipxConnectionsWithRetries Gauge32, ipxDatagramBytesReceivedPerSec Gauge32, ipxDatagramBytesSentPerSec Gauge32, ipxDatagramBytesPerSec Gauge32, ipxDatagramsReceivedPerSec Gauge32, ipxDatagramsSentPerSec Gauge32, ipxDatagramsPerSec Gauge32, ipxDisconnectsLocal Gauge32, ipxDisconnectsRemote Gauge32, ipxExpirationsAck Gauge32, ipxExpirationsResponse Gauge32, ipxFailuresAdapter Gauge32, ipxFailuresLink Gauge32, ipxFailuresNoListen Gauge32, ipxFailuresNotFound Gauge32, ipxFailuresResourceLocal Gauge32, ipxFailuresResourceRemote Gauge32, ipxFrameBytesReSentPerSec Gauge32, ipxFrameBytesReceivedPerSec Gauge32, ipxFrameBytesRejectedPerSec Gauge32, ipxFrameBytesSentPerSec Gauge32, ipxFrameBytesPerSec Gauge32, ipxFramesReSentPerSec Gauge32, ipxFramesReceivedPerSec Gauge32, ipxFramesRejectedPerSec Gauge32, ipxFramesSentPerSec Gauge32, ipxFramesPerSec Gauge32, ipxPacketsReceivedPerSec Gauge32, ipxPacketsSentPerSec Gauge32, ipxPacketsPerSec Gauge32, ipxPiggybackAckQueuedPerSec Gauge32, ipxPiggybackAckTimeouts Gauge32, ipxWindowSendAverage Gauge32, ipxWindowSendMaximum Gauge32 } ipxInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { nwLinkIPXEntry 1 } ipxBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data." ::= { nwLinkIPXEntry 2 } ipxConnectionSessionTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 3 } ipxConnectionsCanceled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 4 } ipxConnectionsNoRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 5 } ipxConnectionsOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time." ::= { nwLinkIPXEntry 6 } ipxConnectionsWithRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 7 } ipxDatagramBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkIPXEntry 8 } ipxDatagramBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkIPXEntry 9 } ipxDatagramBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { nwLinkIPXEntry 10 } ipxDatagramsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkIPXEntry 11 } ipxDatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkIPXEntry 12 } ipxDatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { nwLinkIPXEntry 13 } ipxDisconnectsLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 14 } ipxDisconnectsRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 15 } ipxExpirationsAck OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Ack is the count of T2 timer expirations." ::= { nwLinkIPXEntry 16 } ipxExpirationsResponse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Response is the count of T1 timer expirations." ::= { nwLinkIPXEntry 17 } ipxFailuresAdapter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 18 } ipxFailuresLink OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 19 } ipxFailuresNoListen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests." ::= { nwLinkIPXEntry 20 } ipxFailuresNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 21 } ipxFailuresResourceLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 22 } ipxFailuresResourceRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total." ::= { nwLinkIPXEntry 23 } ipxFrameBytesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data." ::= { nwLinkIPXEntry 24 } ipxFrameBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkIPXEntry 25 } ipxFrameBytesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data." ::= { nwLinkIPXEntry 26 } ipxFrameBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data." ::= { nwLinkIPXEntry 27 } ipxFrameBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data." ::= { nwLinkIPXEntry 28 } ipxFramesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data." ::= { nwLinkIPXEntry 29 } ipxFramesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkIPXEntry 30 } ipxFramesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data." ::= { nwLinkIPXEntry 31 } ipxFramesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkIPXEntry 32 } ipxFramesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data." ::= { nwLinkIPXEntry 33 } ipxPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets." ::= { nwLinkIPXEntry 34 } ipxPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets." ::= { nwLinkIPXEntry 35 } ipxPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets." ::= { nwLinkIPXEntry 36 } ipxPiggybackAckQueuedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer." ::= { nwLinkIPXEntry 37 } ipxPiggybackAckTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented." ::= { nwLinkIPXEntry 38 } ipxWindowSendAverage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer." ::= { nwLinkIPXEntry 39 } ipxWindowSendMaximum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer." ::= { nwLinkIPXEntry 40 } nwLinkNetBIOSTable OBJECT-TYPE SYNTAX SEQUENCE OF NWLinkNetBIOSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NWLink NetBIOS performance object consists of counters that monitor IPX transport rates and connections. This object only reports valid data for counters that monitor datagrams and packets; for frame-related counters, the object tends to report zero values." ::= { advanced 57 } nwLinkNetBIOSEntry OBJECT-TYPE SYNTAX NWLinkNetBIOSEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NWLink NetBIOS' object." INDEX { netBIOSInstance } ::= { nwLinkNetBIOSTable 1 } NWLinkNetBIOSEntry ::= SEQUENCE { netBIOSInstance InstanceName, netBIOSBytesTotalPerSec Gauge32, netBIOSConnectionSessionTimeouts Gauge32, netBIOSConnectionsCanceled Gauge32, netBIOSConnectionsNoRetries Gauge32, netBIOSConnectionsOpen Gauge32, netBIOSConnectionsWithRetries Gauge32, netBIOSDatagramBytesRcvdPerSec Gauge32, netBIOSDatagramBytesSentPerSec Gauge32, netBIOSDatagramBytesPerSec Gauge32, netBIOSDatagramsReceivedPerSec Gauge32, netBIOSDatagramsSentPerSec Gauge32, netBIOSDatagramsPerSec Gauge32, netBIOSDisconnectsLocal Gauge32, netBIOSDisconnectsRemote Gauge32, netBIOSExpirationsAck Gauge32, netBIOSExpirationsResponse Gauge32, netBIOSFailuresAdapter Gauge32, netBIOSFailuresLink Gauge32, netBIOSFailuresNoListen Gauge32, netBIOSFailuresNotFound Gauge32, netBIOSFailuresResourceLocal Gauge32, netBIOSFailuresResourceRemote Gauge32, netBIOSFrameBytesReSentPerSec Gauge32, netBIOSFrameBytesReceivedPerSec Gauge32, netBIOSFrameBytesRejectedPerSec Gauge32, netBIOSFrameBytesSentPerSec Gauge32, netBIOSFrameBytesPerSec Gauge32, netBIOSFramesReSentPerSec Gauge32, netBIOSFramesReceivedPerSec Gauge32, netBIOSFramesRejectedPerSec Gauge32, netBIOSFramesSentPerSec Gauge32, netBIOSFramesPerSec Gauge32, netBIOSPacketsReceivedPerSec Gauge32, netBIOSPacketsSentPerSec Gauge32, netBIOSPacketsPerSec Gauge32, netBIOSPiggybackAckQueuedPerSec Gauge32, netBIOSPiggybackAckTimeouts Gauge32, netBIOSWindowSendAverage Gauge32, netBIOSWindowSendMaximum Gauge32 } netBIOSInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { nwLinkNetBIOSEntry 1 } netBIOSBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data." ::= { nwLinkNetBIOSEntry 2 } netBIOSConnectionSessionTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 3 } netBIOSConnectionsCanceled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 4 } netBIOSConnectionsNoRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 5 } netBIOSConnectionsOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time." ::= { nwLinkNetBIOSEntry 6 } netBIOSConnectionsWithRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 7 } netBIOSDatagramBytesRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkNetBIOSEntry 8 } netBIOSDatagramBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkNetBIOSEntry 9 } netBIOSDatagramBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { nwLinkNetBIOSEntry 10 } netBIOSDatagramsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkNetBIOSEntry 11 } netBIOSDatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkNetBIOSEntry 12 } netBIOSDatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { nwLinkNetBIOSEntry 13 } netBIOSDisconnectsLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 14 } netBIOSDisconnectsRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 15 } netBIOSExpirationsAck OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Ack is the count of T2 timer expirations." ::= { nwLinkNetBIOSEntry 16 } netBIOSExpirationsResponse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Response is the count of T1 timer expirations." ::= { nwLinkNetBIOSEntry 17 } netBIOSFailuresAdapter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 18 } netBIOSFailuresLink OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 19 } netBIOSFailuresNoListen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests." ::= { nwLinkNetBIOSEntry 20 } netBIOSFailuresNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 21 } netBIOSFailuresResourceLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 22 } netBIOSFailuresResourceRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total." ::= { nwLinkNetBIOSEntry 23 } netBIOSFrameBytesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data." ::= { nwLinkNetBIOSEntry 24 } netBIOSFrameBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 25 } netBIOSFrameBytesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 26 } netBIOSFrameBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 27 } netBIOSFrameBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 28 } netBIOSFramesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data." ::= { nwLinkNetBIOSEntry 29 } netBIOSFramesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 30 } netBIOSFramesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 31 } netBIOSFramesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 32 } netBIOSFramesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data." ::= { nwLinkNetBIOSEntry 33 } netBIOSPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets." ::= { nwLinkNetBIOSEntry 34 } netBIOSPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets." ::= { nwLinkNetBIOSEntry 35 } netBIOSPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets." ::= { nwLinkNetBIOSEntry 36 } netBIOSPiggybackAckQueuedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer." ::= { nwLinkNetBIOSEntry 37 } netBIOSPiggybackAckTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented." ::= { nwLinkNetBIOSEntry 38 } netBIOSWindowSendAverage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer." ::= { nwLinkNetBIOSEntry 39 } netBIOSWindowSendMaximum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer." ::= { nwLinkNetBIOSEntry 40 } nwLinkSPXTable OBJECT-TYPE SYNTAX SEQUENCE OF NWLinkSPXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The NWLink SPX performance object consists of counters that measure data transmission and session connections for computers using the SPX protocol. This object only reports valid data for counters that monitor datagrams and packets; for frame-related counters, the object tends to report zero values." ::= { advanced 58 } nwLinkSPXEntry OBJECT-TYPE SYNTAX NWLinkSPXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'NWLink SPX' object." INDEX { spxInstance } ::= { nwLinkSPXTable 1 } NWLinkSPXEntry ::= SEQUENCE { spxInstance InstanceName, spxBytesTotalPerSec Gauge32, spxConnectionSessionTimeouts Gauge32, spxConnectionsCanceled Gauge32, spxConnectionsNoRetries Gauge32, spxConnectionsOpen Gauge32, spxConnectionsWithRetries Gauge32, spxDatagramBytesReceivedPerSec Gauge32, spxDatagramBytesSentPerSec Gauge32, spxDatagramBytesPerSec Gauge32, spxDatagramsReceivedPerSec Gauge32, spxDatagramsSentPerSec Gauge32, spxDatagramsPerSec Gauge32, spxDisconnectsLocal Gauge32, spxDisconnectsRemote Gauge32, spxExpirationsAck Gauge32, spxExpirationsResponse Gauge32, spxFailuresAdapter Gauge32, spxFailuresLink Gauge32, spxFailuresNoListen Gauge32, spxFailuresNotFound Gauge32, spxFailuresResourceLocal Gauge32, spxFailuresResourceRemote Gauge32, spxFrameBytesReSentPerSec Gauge32, spxFrameBytesReceivedPerSec Gauge32, spxFrameBytesRejectedPerSec Gauge32, spxFrameBytesSentPerSec Gauge32, spxFrameBytesPerSec Gauge32, spxFramesReSentPerSec Gauge32, spxFramesReceivedPerSec Gauge32, spxFramesRejectedPerSec Gauge32, spxFramesSentPerSec Gauge32, spxFramesPerSec Gauge32, spxPacketsReceivedPerSec Gauge32, spxPacketsSentPerSec Gauge32, spxPacketsPerSec Gauge32, spxPiggybackAckQueuedPerSec Gauge32, spxPiggybackAckTimeouts Gauge32, spxWindowSendAverage Gauge32, spxWindowSendMaximum Gauge32 } spxInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { nwLinkSPXEntry 1 } spxBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the sum of Frame Bytes/sec and Datagram Bytes/sec. This is the total rate of bytes sent to or received from the network by the protocol, but only counts the bytes in frames (i.e., packets) which carry data." ::= { nwLinkSPXEntry 2 } spxConnectionSessionTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connection Session Timeouts is the number of connections that were dropped due to a session timeout. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 3 } spxConnectionsCanceled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Canceled is the number of connections that were canceled. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 4 } spxConnectionsNoRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections No Retries is the total count of connections that were successfully made on the first try. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 5 } spxConnectionsOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Open is the number of connections currently open for this protocol. This counter shows the current count only and does not accumulate over time." ::= { nwLinkSPXEntry 6 } spxConnectionsWithRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections With Retries is the total count of connections that were made after retrying the attempt. A retry occurs when the first connection attempt failed. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 7 } spxDatagramBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Received/sec is the rate at which datagram bytes are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkSPXEntry 8 } spxDatagramBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes Sent/sec is the rate at which datagram bytes are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkSPXEntry 9 } spxDatagramBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagram Bytes/sec is the rate at which datagram bytes are processed by the computer. This counter is the sum of datagram bytes that are sent as well as received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { nwLinkSPXEntry 10 } spxDatagramsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate at which datagrams are received by the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkSPXEntry 11 } spxDatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate at which datagrams are sent from the computer. A datagram is a connectionless packet whose delivery to a remote computer is not guaranteed." ::= { nwLinkSPXEntry 12 } spxDatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate at which datagrams are processed by the computer. This counter displays the sum of datagrams sent and datagrams received. A datagram is a connectionless packet whose delivery to a remote is not guaranteed." ::= { nwLinkSPXEntry 13 } spxDisconnectsLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Local is the number of session disconnections that were initiated by the local computer. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 14 } spxDisconnectsRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disconnects Remote is the number of session disconnections that were initiated by the remote computer. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 15 } spxExpirationsAck OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Ack is the count of T2 timer expirations." ::= { nwLinkSPXEntry 16 } spxExpirationsResponse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Expirations Response is the count of T1 timer expirations." ::= { nwLinkSPXEntry 17 } spxFailuresAdapter OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Adapter is the number of connections that were dropped due to an adapter failure. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 18 } spxFailuresLink OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Link is the number of connections that were dropped due to a link failure. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 19 } spxFailuresNoListen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures No Listen is the number of connections that were rejected because the remote computer was not listening for connection requests." ::= { nwLinkSPXEntry 20 } spxFailuresNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Not Found is the number of connection attempts that failed because the remote computer could not be found. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 21 } spxFailuresResourceLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Local is the number of connections that failed because of resource problems or shortages on the local computer. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 22 } spxFailuresResourceRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failures Resource Remote is the number of connections that failed because of resource problems or shortages on the remote computer. This number is an accumulator and shows a running total." ::= { nwLinkSPXEntry 23 } spxFrameBytesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Re-Sent/sec is the rate at which data bytes are re-sent by the computer. This counter only counts the bytes in frames that carry data." ::= { nwLinkSPXEntry 24 } spxFrameBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Received/sec is the rate at which data bytes are received by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkSPXEntry 25 } spxFrameBytesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Rejected/sec is the rate at which data bytes are rejected. This counter only counts the bytes in data frames (packets) that carry data." ::= { nwLinkSPXEntry 26 } spxFrameBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes Sent/sec is the rate at which data bytes are sent by the computer. This counter only counts the bytes in frames (packets) that carry data." ::= { nwLinkSPXEntry 27 } spxFrameBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frame Bytes/sec is the rate at which data bytes are processed by the computer. This counter is the sum of data frame bytes sent and received. This counter only counts the byte in frames (packets) that carry data." ::= { nwLinkSPXEntry 28 } spxFramesReSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Re-Sent/sec is the rate at which data frames (packets) are re-sent by the computer. This counter only counts the frames or packets that carry data." ::= { nwLinkSPXEntry 29 } spxFramesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Received/sec is the rate at which data frames are received by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkSPXEntry 30 } spxFramesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Rejected/sec is the rate at which data frames are rejected. This counter only counts the frames (packets) that carry data." ::= { nwLinkSPXEntry 31 } spxFramesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames Sent/sec is the rate at which data frames are sent by the computer. This counter only counts the frames (packets) that carry data." ::= { nwLinkSPXEntry 32 } spxFramesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Frames/sec is the rate at which data frames (or packets) are processed by the computer. This counter is the sum of data frames sent and data frames received. This counter only counts those frames (packets) that carry data." ::= { nwLinkSPXEntry 33 } spxPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which packets are received by the computer. This counter counts all packets processed: control as well as data packets." ::= { nwLinkSPXEntry 34 } spxPacketsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Sent/sec is the rate at which packets are sent by the computer. This counter counts all packets sent by the computer, i.e. control as well as data packets." ::= { nwLinkSPXEntry 35 } spxPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets/sec is the rate at which packets are processed by the computer. This count is the sum of Packets Sent and Packets Received per second. This counter includes all packets processed: control as well as data packets." ::= { nwLinkSPXEntry 36 } spxPiggybackAckQueuedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Queued/sec is the rate at which piggybacked acknowledgments are queued. Piggyback acknowledgments are acknowledgments to received packets that are to be included in the next outgoing packet to the remote computer." ::= { nwLinkSPXEntry 37 } spxPiggybackAckTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Piggyback Ack Timeouts is the number of times that a piggyback acknowledgment could not be sent because there was no outgoing packet to the remote on which to piggyback. A piggyback ack is an acknowledgment to a received packet that is sent along in an outgoing data packet to the remote computer. If no outgoing packet is sent within the timeout period, then an ack packet is sent and this counter is incremented." ::= { nwLinkSPXEntry 38 } spxWindowSendAverage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Average is the running average number of data bytes that were sent before waiting for an acknowledgment from the remote computer." ::= { nwLinkSPXEntry 39 } spxWindowSendMaximum OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Window Send Maximum is the maximum number of bytes of data that will be sent before waiting for an acknowledgment from the remote computer." ::= { nwLinkSPXEntry 40 } objects OBJECT-IDENTITY STATUS current DESCRIPTION "The Objects performance object consists of counters that monitor logical objects in the system, such as processes, threads, mutexes, and semaphores. This information can be used to detect the unnecessary consumption of computer resources. Each object requires memory to store basic information about the object." ::= { advanced 59 } objectsEvents OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Events is the number of events in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. An event is used when two or more threads try to synchronize execution." ::= { objects 1 } objectsMutexes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Mutexes counts the number of mutexes in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. Mutexes are used by threads to assure only one thread is executing a particular section of code." ::= { objects 2 } objectsProcesses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Processes is the number of processes in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. Each process represents the running of a program." ::= { objects 3 } objectsSections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sections is the number of sections in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. A section is a portion of virtual memory created by a process for storing data. A process can share sections with other processes." ::= { objects 4 } objectsSemaphores OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Semaphores is the number of semaphores in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. Threads use semaphores to obtain exclusive access to data structures that they share with other threads." ::= { objects 5 } objectsThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threads is the number of threads in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. A thread is the basic executable entity that can execute instructions in a processor." ::= { objects 6 } pagingFileTable OBJECT-TYPE SYNTAX SEQUENCE OF PagingFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Paging File performance object consists of counters that monitor the paging file(s) on the computer. The paging file is a reserved space on disk that backs up committed physical memory on the computer." ::= { advanced 60 } pagingFileEntry OBJECT-TYPE SYNTAX PagingFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Paging File' object." INDEX { pagingFileInstance } ::= { pagingFileTable 1 } PagingFileEntry ::= SEQUENCE { pagingFileInstance InstanceName, pagingFilePercentUsage Gauge32, pagingFilePercentUsagePeak Gauge32 } pagingFileInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { pagingFileEntry 1 } pagingFilePercentUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of the Page File instance in use in percent. See also Process\\Page File Bytes." ::= { pagingFileEntry 2 } pagingFilePercentUsagePeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak usage of the Page File instance in percent. See also Process\\Page File Bytes Peak." ::= { pagingFileEntry 3 } physicalDiskTable OBJECT-TYPE SYNTAX SEQUENCE OF PhysicalDiskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PhysicalDisk performance object consists of counters that monitor hard or fixed disk drives on a computer. Disks are used to store file, program, and paging data, are read to retrieve these items, and are written to record changes to them. The values of physical disk counters are sums of the values of the logical disks (or partitions) into which they are divided." ::= { advanced 61 } physicalDiskEntry OBJECT-TYPE SYNTAX PhysicalDiskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'PhysicalDisk' object." INDEX { pDiskInstance } ::= { physicalDiskTable 1 } PhysicalDiskEntry ::= SEQUENCE { pDiskInstance InstanceName, pDiskPercentDiskReadTime Gauge32, pDiskPercentDiskTime Gauge32, pDiskPercentDiskWriteTime Gauge32, pDiskPercentIdleTime Gauge32, pDiskAvgDiskBytesPerRead Gauge32, pDiskAvgDiskBytesPerTransfer Gauge32, pDiskAvgDiskBytesPerWrite Gauge32, pDiskAvgDiskQueueLength Gauge32, pDiskAvgDiskReadQueueLength Gauge32, pDiskAvgDiskWriteQueueLength Gauge32, pDiskAvgDiskSecPerRead Gauge32, pDiskAvgDiskSecPerTransfer Gauge32, pDiskAvgDiskSecPerWrite Gauge32, pDiskCurrentDiskQueueLength Gauge32, pDiskDiskBytesPerSec Gauge32, pDiskDiskReadBytesPerSec Gauge32, pDiskDiskReadsPerSec Gauge32, pDiskDiskTransfersPerSec Gauge32, pDiskDiskWriteBytesPerSec Gauge32, pDiskDiskWritesPerSec Gauge32, pDiskSplitIOPerSec Gauge32 } pDiskInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { physicalDiskEntry 1 } pDiskPercentDiskReadTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Disk Read Time is the percentage of elapsed time that the selected disk drive was busy servicing read requests." ::= { physicalDiskEntry 2 } pDiskPercentDiskTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Disk Time is the percentage of elapsed time that the selected disk drive was busy servicing read or write requests." ::= { physicalDiskEntry 3 } pDiskPercentDiskWriteTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Disk Write Time is the percentage of elapsed time that the selected disk drive was busy servicing write requests." ::= { physicalDiskEntry 4 } pDiskPercentIdleTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Idle Time reports the percentage of time during the sample interval that the disk was idle." ::= { physicalDiskEntry 5 } pDiskAvgDiskBytesPerRead OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Bytes/Read is the average number of bytes transferred from the disk during read operations." ::= { physicalDiskEntry 6 } pDiskAvgDiskBytesPerTransfer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Bytes/Transfer is the average number of bytes transferred to or from the disk during write or read operations." ::= { physicalDiskEntry 7 } pDiskAvgDiskBytesPerWrite OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Bytes/Write is the average number of bytes transferred to the disk during write operations." ::= { physicalDiskEntry 8 } pDiskAvgDiskQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Queue Length is the average number of both read and write requests that were queued for the selected disk during the sample interval. Multiplied by 1000 to provide a useful gauge value since it is commonly a fractional value." ::= { physicalDiskEntry 9 } pDiskAvgDiskReadQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Read Queue Length is the average number of read requests that were queued for the selected disk during the sample interval. Multiplied by 1000 to provide a useful gauge value since it is commonly a fractional value." ::= { physicalDiskEntry 10 } pDiskAvgDiskWriteQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk Write Queue Length is the average number of write requests that were queued for the selected disk during the sample interval. Multiplied by 1000 to provide a useful gauge value since it is commonly a fractional value." ::= { physicalDiskEntry 11 } pDiskAvgDiskSecPerRead OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk sec/Read is the average time, in seconds, of a read of data from the disk. Multiplied by 1000000 to provide a useful gauge value since it is commonly a fractional value." ::= { physicalDiskEntry 12 } pDiskAvgDiskSecPerTransfer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk sec/Transfer is the time, in seconds, of the average disk transfer. Multiplied by 1000000 to provide a useful gauge value since it is commonly a fractional value." ::= { physicalDiskEntry 13 } pDiskAvgDiskSecPerWrite OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg. Disk sec/Write is the average time, in seconds, of a write of data to the disk. Multiplied by 1000000 to provide a useful gauge value since it is commonly a fractional value." ::= { physicalDiskEntry 14 } pDiskCurrentDiskQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Disk Queue Length is the number of requests outstanding on the disk at the time the performance data is collected. It also includes requests in service at the time of the collection. This is a instantaneous snapshot, not an average over the time interval. Multi-spindle disk devices can have multiple requests that are active at one time, but other concurrent requests are awaiting service. This counter might reflect a transitory high or low queue length, but if there is a sustained load on the disk drive, it is likely that this will be consistently high. Requests experience delays proportional to the length of this queue minus the number of spindles on the disks. For good performance, this difference should average less than two." ::= { physicalDiskEntry 15 } pDiskDiskBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Bytes/sec is the rate bytes are transferred to or from the disk during write or read operations." ::= { physicalDiskEntry 16 } pDiskDiskReadBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Read Bytes/sec is the rate at which bytes are transferred from the disk during read operations." ::= { physicalDiskEntry 17 } pDiskDiskReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Reads/sec is the rate of read operations on the disk." ::= { physicalDiskEntry 18 } pDiskDiskTransfersPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Transfers/sec is the rate of read and write operations on the disk." ::= { physicalDiskEntry 19 } pDiskDiskWriteBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Write Bytes/sec is rate at which bytes are transferred to the disk during write operations." ::= { physicalDiskEntry 20 } pDiskDiskWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Disk Writes/sec is the rate of write operations on the disk." ::= { physicalDiskEntry 21 } pDiskSplitIOPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Split IO/Sec reports the rate at which I/Os to the disk were split into multiple I/Os. A split I/O may result from requesting data of a size that is too large to fit into a single I/O or that the disk is fragmented." ::= { physicalDiskEntry 22 } pop3Service OBJECT IDENTIFIER ::= { advanced 62 } pop3SvcBytesReceivePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received per second" ::= { pop3Service 1 } pop3SvcBytesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes transmitted per second" ::= { pop3Service 2 } pop3SvcConnectionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of connections per second" ::= { pop3Service 3 } pop3SvcFreeThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of free threads" ::= { pop3Service 4 } pop3SvcMailboxesInAuthState OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of connections in Authentication state" ::= { pop3Service 5 } pop3SvcMailboxesInTranState OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of connections in Transaction state" ::= { pop3Service 6 } pop3SvcMessagesDeliveredPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of messages delivered per second" ::= { pop3Service 7 } pop3SvcSocketsInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current active POP3 connections" ::= { pop3Service 8 } pop3SvcTotalConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total connections since the service starts." ::= { pop3Service 9 } pop3SvcTotalFailedLogons OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failed logons since service starts" ::= { pop3Service 10 } pop3SvcTotalBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total bytes of POP3 request received" ::= { pop3Service 11 } pop3SvcTotalBytesTransmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes of POP3 messages transmitted" ::= { pop3Service 12 } pop3SvcTotalMessagesDelivered OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of messages delivered since service starts" ::= { pop3Service 13 } printQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF PrintQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Windows 2000 printing features provide the Print Queue Object performance object for tracking activity in the server print queue. Its counters are reset when either the print server or the spooler service is restarted." ::= { advanced 63 } printQueueEntry OBJECT-TYPE SYNTAX PrintQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Print Queue' object." INDEX { printQueueInstance } ::= { printQueueTable 1 } PrintQueueEntry ::= SEQUENCE { printQueueInstance InstanceName, printQueueAddNetworkPrinterCalls Gauge32, printQueueBytesPrintedPerSec Gauge32, printQueueEnumNetworkPrinterCall Gauge32, printQueueJobErrors Gauge32, printQueueJobs Gauge32, printQueueJobsSpooling Gauge32, printQueueMaxJobsSpooling Gauge32, printQueueMaxReferences Gauge32, printQueueNotReadyErrors Gauge32, printQueueOutOfPaperErrors Gauge32, printQueueReferences Gauge32, printQueueTotalJobsPrinted Gauge32, printQueueTotalPagesPrinted Gauge32 } printQueueInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { printQueueEntry 1 } printQueueAddNetworkPrinterCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls from other print servers to add shared network printers to this server since last restart." ::= { printQueueEntry 2 } printQueueBytesPrintedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes per second printed on a print queue." ::= { printQueueEntry 3 } printQueueEnumNetworkPrinterCall OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of calls from browse clients to this print server to request network browse lists since last restart." ::= { printQueueEntry 4 } printQueueJobErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of job errors in a print queue since last restart." ::= { printQueueEntry 5 } printQueueJobs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of jobs in a print queue." ::= { printQueueEntry 6 } printQueueJobsSpooling OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of spooling jobs in a print queue." ::= { printQueueEntry 7 } printQueueMaxJobsSpooling OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of spooling jobs in a print queue since last restart." ::= { printQueueEntry 8 } printQueueMaxReferences OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak number of references (open handles) to this printer." ::= { printQueueEntry 9 } printQueueNotReadyErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of printer not ready errors in a print queue since the last restart." ::= { printQueueEntry 10 } printQueueOutOfPaperErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of out of paper errors in a print queue since the last restart." ::= { printQueueEntry 11 } printQueueReferences OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of references (open handles) to this printer." ::= { printQueueEntry 12 } printQueueTotalJobsPrinted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of jobs printed on a print queue since the last restart." ::= { printQueueEntry 13 } printQueueTotalPagesPrinted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of pages printed through GDI on a print queue since the last restart." ::= { printQueueEntry 14 } processTable OBJECT-TYPE SYNTAX SEQUENCE OF ProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Process performance object consists of counters that monitor running application program and system processes. All the threads in a process share the same address space and have access to the same data." ::= { advanced 64 } processEntry OBJECT-TYPE SYNTAX ProcessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Process' object." INDEX { processInstance } ::= { processTable 1 } ProcessEntry ::= SEQUENCE { processInstance InstanceName, processPercentPrivilegedTime Gauge32, processPercentProcessorTime Gauge32, processPercentUserTime Gauge32, processCreatingProcessID Gauge32, processElapsedTime Gauge32, processHandleCount Gauge32, processIDProcess Gauge32, processIODataBytesPerSec Gauge32, processIODataOperationsPerSec Gauge32, processIOOtherBytesPerSec Gauge32, processIOOtherOperationsPerSec Gauge32, processIOReadBytesPerSec Gauge32, processIOReadOperationsPerSec Gauge32, processIOWriteBytesPerSec Gauge32, processIOWriteOperationsPerSec Gauge32, processPageFaultsPerSec Gauge32, processPageFileBytes Gauge32, processPageFileBytesPeak Gauge32, processPoolNonpagedBytes Gauge32, processPoolPagedBytes Gauge32, processPriorityBase Gauge32, processPrivateBytes Gauge32, processThreadCount Gauge32, processVirtualBytes Gauge32, processVirtualBytesPeak Gauge32, processWorkingSet Gauge32, processWorkingSetPeak Gauge32, processPageFileKBytes Gauge32, processPageFileKBytesPeak Gauge32, processPoolNonpagedKBytes Gauge32, processPoolPagedKBytes Gauge32, processPrivateKBytes Gauge32, processVirtualKBytes Gauge32, processVirtualKBytesPeak Gauge32, processWorkingSetKBytes Gauge32, processWorkingSetKBytesPeak Gauge32, processPageFileMBytes Gauge32, processPageFileMBytesPeak Gauge32, processPoolNonpagedMBytes Gauge32, processPoolPagedMBytes Gauge32, processPrivateMBytes Gauge32, processVirtualMBytes Gauge32, processVirtualMBytesPeak Gauge32, processWorkingSetMBytes Gauge32, processWorkingSetMBytesPeak Gauge32, processWorkingSetPrivate Gauge32, processWorkingSetKPrivate Gauge32, processWorkingSetMPrivate Gauge32 } processInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { processEntry 1 } processPercentPrivilegedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service is called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { processEntry 2 } processPercentProcessorTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Processor Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count." ::= { processEntry 3 } processPercentUserTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% User Time is the percentage of elapsed time that the process threads spent executing code in user mode. Applications, environment subsystems, and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows executive, kernel, and device drivers. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { processEntry 4 } processCreatingProcessID OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Creating Process ID value is the Process ID of the process that created the process. The creating process may have terminated, so this value may no longer identify a running process." ::= { processEntry 5 } processElapsedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total elapsed time, in seconds, that this process has been running." ::= { processEntry 6 } processHandleCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of handles currently open by this process. This number is equal to the sum of the handles currently open by each thread in this process." ::= { processEntry 7 } processIDProcess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID Process is the unique identifier of this process. ID Process numbers are reused, so they only identify a process for the lifetime of that process." ::= { processEntry 8 } processIODataBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is reading and writing bytes in I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 9 } processIODataOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing read and write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 10 } processIOOtherBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing bytes to I/O operations that do not involve data such as control operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 11 } processIOOtherOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing I/O operations that are neither read nor write operations (for example, a control function). This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 12 } processIOReadBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is reading bytes from I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 13 } processIOReadOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing read I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 14 } processIOWriteBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is writing bytes to I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 15 } processIOWriteOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the process is issuing write I/O operations. This counter counts all I/O activity generated by the process to include file, network and device I/Os." ::= { processEntry 16 } processPageFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page Faults/sec is the rate at which page faults by the threads executing in this process are occurring. A page fault occurs when a thread refers to a virtual memory page that is not in its working set in main memory. This may not cause the page to be fetched from disk if it is on the standby list and hence already in main memory, or if it is in use by another process with whom the page is shared." ::= { processEntry 17 } processPageFileBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File Bytes is the current amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the current amount of virtual memory that the process has reserved for use in physical memory." ::= { processEntry 18 } processPageFileBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File Bytes Peak is the maximum amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the maximum amount of virtual memory that the process has reserved for use in physical memory." ::= { processEntry 19 } processPoolNonpagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged Bytes is the size, in bytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged Bytes is calculated differently than Process\\Pool Nonpaged Bytes, so it might not equal Process\\Pool Nonpaged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { processEntry 20 } processPoolPagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Bytes is the size, in bytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged Bytes is calculated differently than Process\\Pool Paged Bytes, so it might not equal Process\\Pool Paged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { processEntry 21 } processPriorityBase OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current base priority of this process. Threads within a process can raise and lower their own base priority relative to the process' base priority." ::= { processEntry 22 } processPrivateBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Private Bytes is the current size, in bytes, of memory that this process has allocated that cannot be shared with other processes." ::= { processEntry 23 } processThreadCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread." ::= { processEntry 24 } processVirtualBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual Bytes is the current size, in bytes, of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and the process can limit its ability to load libraries." ::= { processEntry 25 } processVirtualBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual Bytes Peak is the maximum size, in bytes, of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. However, virtual space is finite, and the process might limit its ability to load libraries." ::= { processEntry 26 } processWorkingSet OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set is the current size, in bytes, of the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before leaving main memory." ::= { processEntry 27 } processWorkingSetPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set Peak is the maximum size, in bytes, of the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory." ::= { processEntry 28 } processPageFileKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File KiloBytes is the current number of kilobytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory." ::= { processEntry 29 } processPageFileKBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File KiloBytes Peak is the maximum number of kilobytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory." ::= { processEntry 30 } processPoolNonpagedKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged KiloBytes is the number of kilobytes in the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory: Pool Nonpaged KiloBytes is calculated differently than Process: Pool Nonpaged KiloBytes, so it might not equal Process: Pool Nonpaged KiloBytes: _Total. This counter displays the last observed value only; it is not an average. " ::= { processEntry 31 } processPoolPagedKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged KiloBytes is the number of kilobytes in the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory: Pool Paged KiloBytes is calculated differently than Process: Pool Paged KiloBytes, so it might not equal Process: Pool Paged KiloBytes: _Total. This counter displays the last observed value only; it is not an average. " ::= { processEntry 32 } processPrivateKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Private KiloBytes is the current number of kilobytes this process has allocated that cannot be shared with other processes." ::= { processEntry 33 } processVirtualKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual KiloBytes is the current size in kilobytes of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and by using too much, the process can limit its ability to load libraries." ::= { processEntry 34 } processVirtualKBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual KiloBytes Peak is the maximum number of kilobytes of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is however finite, and by using too much, the process might limit its ability to load libraries." ::= { processEntry 35 } processWorkingSetKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set is the current number of kilobytes in the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory." ::= { processEntry 36 } processWorkingSetKBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set Peak is the maximum number of kilobytes in the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory." ::= { processEntry 37 } processPageFileMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File MegaBytes is the current number of megabytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory." ::= { processEntry 38 } processPageFileMBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File MegaBytes Peak is the maximum number of megabytes this process has used in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and lack of space in paging files can prevent other processes from allocating memory." ::= { processEntry 39 } processPoolNonpagedMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged MegaBytes is the number of megabytes in the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory: Pool Nonpaged MegaBytes is calculated differently than Process: Pool Nonpaged MegaBytes, so it might not equal Process: Pool Nonpaged MegaBytes: _Total. This counter displays the last observed value only; it is not an average. " ::= { processEntry 40 } processPoolPagedMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged MegaBytes is the number of megabytes in the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory: Pool Paged MegaBytes is calculated differently than Process: Pool Paged MegaBytes, so it might not equal Process: Pool Paged MegaBytes: _Total. This counter displays the last observed value only; it is not an average. " ::= { processEntry 41 } processPrivateMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Private MegaBytes is the current number of megabytes this process has allocated that cannot be shared with other processes." ::= { processEntry 42 } processVirtualMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual MegaBytes is the current size in megabytes of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and by using too much, the process can limit its ability to load libraries." ::= { processEntry 43 } processVirtualMBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual MegaBytes Peak is the maximum number of megabytes of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is however finite, and by using too much, the process might limit its ability to load libraries." ::= { processEntry 44 } processWorkingSetMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set is the current number of megabytes in the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory." ::= { processEntry 45 } processWorkingSetMBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set Peak is the maximum number of megabytes in the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory." ::= { processEntry 46 } processWorkingSetPrivate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set - Private displays the size of the working set, in bytes, that is use for this process only and not shared nor sharable by other processes." ::= { processEntry 47 } processWorkingSetKPrivate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set - Private displays the size of the working set, in kilobytes, that is use for this process only and not shared nor sharable by other processes." ::= { processEntry 48 } processWorkingSetMPrivate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set - Private displays the size of the working set, in megabytes, that is use for this process only and not shared nor sharable by other processes." ::= { processEntry 49 } processorTable OBJECT-TYPE SYNTAX SEQUENCE OF ProcessorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Processor performance object consists of counters that measure aspects of processor activity. The processor is the part of the computer that performs arithmetic and logical computations, initiates operations on peripherals, and runs the threads of processes. A computer can have multiple processors. The processor object represents each processor as an instance of the object." ::= { advanced 65 } processorEntry OBJECT-TYPE SYNTAX ProcessorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Processor' object." INDEX { cpuInstance } ::= { processorTable 1 } ProcessorEntry ::= SEQUENCE { cpuInstance InstanceName, cpuPercentC1Time Gauge32, cpuPercentC2Time Gauge32, cpuPercentC3Time Gauge32, cpuPercentDPCTime Gauge32, cpuPercentIdleTime Gauge32, cpuPercentInterruptTime Gauge32, cpuPercentPrivilegedTime Gauge32, cpuPercentProcessorTime Gauge32, cpuPercentUserTime Gauge32, cpuC1TransitionsPerSec Gauge32, cpuC2TransitionsPerSec Gauge32, cpuC3TransitionsPerSec Gauge32, cpuDPCRate Gauge32, cpuDPCsQueuedPerSec Gauge32, cpuInterruptsPerSec Gauge32 } cpuInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { processorEntry 1 } cpuPercentC1Time OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% C1 Time is the percentage of time the processor spends in the C1 low-power idle state. % C1 Time is a subset of the total processor idle time. C1 low-power idle state enables the processor to maintain its entire context and quickly return to the running state. Not all systems support the % C1 state." ::= { processorEntry 2 } cpuPercentC2Time OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% C2 Time is the percentage of time the processor spends in the C2 low-power idle state. % C2 Time is a subset of the total processor idle time. C2 low-power idle state enables the processor to maintain the context of the system caches. The C2 power state is a lower power and higher exit latency state than C1. Not all systems support the C2 state." ::= { processorEntry 3 } cpuPercentC3Time OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% C3 Time is the percentage of time the processor spends in the C3 low-power idle state. % C3 Time is a subset of the total processor idle time. When the processor is in the C3 low-power idle state it is unable to maintain the coherency of its caches. The C3 power state is a lower power and higher exit latency state than C2. Not all systems support the C3 state." ::= { processorEntry 4 } cpuPercentDPCTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% DPC Time is the percentage of time that the processor spent receiving and servicing deferred procedure calls (DPCs) during the sample interval. DPCs are interrupts that run at a lower priority than standard interrupts. % DPC Time is a component of % Privileged Time because DPCs are executed in privileged mode. They are counted separately and are not a component of the interrupt counters. This counter displays the average busy time as a percentage of the sample time." ::= { processorEntry 5 } cpuPercentIdleTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Idle Time is the percentage of time the processor is idle during the sample interval" ::= { processorEntry 6 } cpuPercentInterruptTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Interrupt Time is the time the processor spends receiving and servicing hardware interrupts during sample intervals. This value is an indirect indicator of the activity of devices that generate interrupts, such as the system clock, the mouse, disk drivers, data communication lines, network interface cards and other peripheral devices. These devices normally interrupt the processor when they have completed a task or require attention. Normal thread execution is suspended during interrupts. Most system clocks interrupt the processor every 10 milliseconds, creating a background of interrupt activity. suspends normal thread execution during interrupts. This counter displays the average busy time as a percentage of the sample time." ::= { processorEntry 7 } cpuPercentPrivilegedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service in called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { processorEntry 8 } cpuPercentProcessorTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Processor Time is the percentage of elapsed time that the processor spends to execute a non-Idle thread. It is calculated by measuring the percentage of time that the processor spends executing the idle thread and then subtracting that value from 100%. (Each processor has an idle thread that consumes cycles when no other threads are ready to run). This counter is the primary indicator of processor activity, and displays the average percentage of busy time observed during the sample interval. It should be noted that the accounting calculation of whether the processor is idle is performed at an internal sampling interval of the system clock (10ms). On todays fast processors, % Processor Time can therefore underestimate the processor utilization as the processor may be spending a lot of time servicing threads between the system clock sampling interval. Workload based timer applications are one example of applications which are more likely to be measured inaccurately as timers are signaled just after the sample is taken." ::= { processorEntry 9 } cpuPercentUserTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% User Time is the percentage of elapsed time the processor spends in the user mode. User mode is a restricted processing mode designed for applications, environment subsystems, and integral subsystems. The alternative, privileged mode, is designed for operating system components and allows direct access to hardware and all memory. The operating system switches application threads to privileged mode to access operating system services. This counter displays the average busy time as a percentage of the sample time." ::= { processorEntry 10 } cpuC1TransitionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "C1 Transitions/sec is the rate that the CPU enters the C1 low-power idle state. The CPU enters the C1 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { processorEntry 11 } cpuC2TransitionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "C2 Transitions/sec is the rate that the CPU enters the C2 low-power idle state. The CPU enters the C2 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { processorEntry 12 } cpuC3TransitionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "C3 Transitions/sec is the rate that the CPU enters the C3 low-power idle state. The CPU enters the C3 state when it is sufficiently idle and exits this state on any interrupt. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { processorEntry 13 } cpuDPCRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "DPC Rate is the rate at which deferred procedure calls (DPCs) were added to the processors DPC queues between the timer ticks of the processor clock. DPCs are interrupts that run at alower priority than standard interrupts. Each processor has its own DPC queue. This counter measures the rate that DPCs were added to the queue, not the number of DPCs in the queue. This counter displays the last observed value only; it is not an average." ::= { processorEntry 14 } cpuDPCsQueuedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "DPCs Queued/sec is the average rate, in incidents per second, at which deferred procedure calls (DPCs) were added to the processor's DPC queue. DPCs are interrupts that run at a lower priority than standard interrupts. Each processor has its own DPC queue. This counter measures the rate that DPCs are added to the queue, not the number of DPCs in the queue. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { processorEntry 15 } cpuInterruptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Interrupts/sec is the average rate, in incidents per second, at which the processor received and serviced hardware interrupts. It does not include deferred procedure calls (DPCs), which are counted separately. This value is an indirect indicator of the activity of devices that generate interrupts, such as the system clock, the mouse, disk drivers, data communication lines, network interface cards, and other peripheral devices. These devices normally interrupt the processor when they have completed a task or require attention. Normal thread execution is suspended. The system clock typically interrupts the processor every 10 milliseconds, creating a background of interrupt activity. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { processorEntry 16 } pSchedFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF PSchedFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PSched Flow Object shows statistics from the packet scheduler, a feature of QoS Admission Control." ::= { advanced 66 } pSchedFlowEntry OBJECT-TYPE SYNTAX PSchedFlowEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'PSched Flow' object." INDEX { pSchedFlowInstance } ::= { pSchedFlowTable 1 } PSchedFlowEntry ::= SEQUENCE { pSchedFlowInstance InstanceName, pSchedFlowAveragePktsInNetcard Gauge32, pSchedFlowAveragePktsInSequencer Gauge32, pSchedFlowAveragePktsInShaper Gauge32, pSchedFlowBytesScheduled Gauge32, pSchedFlowBytesScheduledPerSec Gauge32, pSchedFlowBytesTransmitted Gauge32, pSchedFlowBytesTransmittedPerSec Gauge32, pSchedFlowMaxPktsInSequencer Gauge32, pSchedFlowMaxPktsInShaper Gauge32, pSchedFlowMaximumPktsInNetcard Gauge32, pSchedFlowNonconfPktsSched Gauge32, pSchedFlowNonconfPktsSchedPerSec Gauge32, pSchedFlowNonconfPktsXmitd Gauge32, pSchedFlowNonconfPktsXmitdPerSec Gauge32, pSchedFlowPktsDropped Gauge32, pSchedFlowPktsDroppedPerSec Gauge32, pSchedFlowPktsScheduled Gauge32, pSchedFlowPktsScheduledPerSec Gauge32, pSchedFlowPktsTransmitted Gauge32, pSchedFlowPktsTransmittedPerSec Gauge32 } pSchedFlowInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { pSchedFlowEntry 1 } pSchedFlowAveragePktsInNetcard OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets that have been queued in the netcard by this flow." ::= { pSchedFlowEntry 2 } pSchedFlowAveragePktsInSequencer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets in the sequencer over the last sampling period" ::= { pSchedFlowEntry 3 } pSchedFlowAveragePktsInShaper OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets in the shaper over the last sampling period" ::= { pSchedFlowEntry 4 } pSchedFlowBytesScheduled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes which got scheduled in some way (rather than just being directly sent to the underlying miniport)" ::= { pSchedFlowEntry 5 } pSchedFlowBytesScheduledPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes per second from this flow which have been scheduled" ::= { pSchedFlowEntry 6 } pSchedFlowBytesTransmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes from this flow which have been sent" ::= { pSchedFlowEntry 7 } pSchedFlowBytesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes per second from this flow which have been sent" ::= { pSchedFlowEntry 8 } pSchedFlowMaxPktsInSequencer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of packets that have ever simultaneously been in the sequencer" ::= { pSchedFlowEntry 9 } pSchedFlowMaxPktsInShaper OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of packets that have ever simultaneously been in the shaper" ::= { pSchedFlowEntry 10 } pSchedFlowMaximumPktsInNetcard OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of packets that have been queued in the netcard by this flow." ::= { pSchedFlowEntry 11 } pSchedFlowNonconfPktsSched OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have entered the packet scheduler at a rate which exceeded the flow parameters" ::= { pSchedFlowEntry 12 } pSchedFlowNonconfPktsSchedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which nonconforming packets have entered the packet scheduler" ::= { pSchedFlowEntry 13 } pSchedFlowNonconfPktsXmitd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have been sent by the packet scheduler at a rate which exceeded the flow parameters" ::= { pSchedFlowEntry 14 } pSchedFlowNonconfPktsXmitdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which nonconforming packets have been sent by the packet scheduler" ::= { pSchedFlowEntry 15 } pSchedFlowPktsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped by the packet scheduler" ::= { pSchedFlowEntry 16 } pSchedFlowPktsDroppedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets dropped by the packet scheduler from this flow per second" ::= { pSchedFlowEntry 17 } pSchedFlowPktsScheduled OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets which got scheduled in some way (rather than just being directly sent to the underlying miniport)" ::= { pSchedFlowEntry 18 } pSchedFlowPktsScheduledPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second from this flow which have been scheduled" ::= { pSchedFlowEntry 19 } pSchedFlowPktsTransmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets from this flow which have been sent" ::= { pSchedFlowEntry 20 } pSchedFlowPktsTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets per second from this flow which have been sent" ::= { pSchedFlowEntry 21 } pSchedPipeTable OBJECT-TYPE SYNTAX SEQUENCE OF PSchedPipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PSched Pipe Object performance object reports statistics from the packet scheduler, a feature of QoS Admission Control." ::= { advanced 67 } pSchedPipeEntry OBJECT-TYPE SYNTAX PSchedPipeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'PSched Pipe' object." INDEX { pSchedPipeInstance } ::= { pSchedPipeTable 1 } PSchedPipeEntry ::= SEQUENCE { pSchedPipeInstance InstanceName, pSchedPipeAvgPacketsInNetcard Gauge32, pSchedPipeAvgPacketsInSequencer Gauge32, pSchedPipeAvgPacketsInShaper Gauge32, pSchedPipeFlowModsRejected Gauge32, pSchedPipeFlowsClosed Gauge32, pSchedPipeFlowsModified Gauge32, pSchedPipeFlowsOpened Gauge32, pSchedPipeFlowsRejected Gauge32, pSchedPipeMaxPacketsInNetcard Gauge32, pSchedPipeMaxPacketsInSequencer Gauge32, pSchedPipeMaxPacketsInShaper Gauge32, pSchedPipeMaxSimultaneousFlows Gauge32, pSchedPipeBadPacketsSched Gauge32, pSchedPipeBadPacketsSchedPerSec Gauge32, pSchedPipeBadPacketsXmited Gauge32, pSchedPipeBadPacketsXmitedPerSec Gauge32, pSchedPipeOutOfPackets Gauge32 } pSchedPipeInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { pSchedPipeEntry 1 } pSchedPipeAvgPacketsInNetcard OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets in the network card over the last sampling period" ::= { pSchedPipeEntry 2 } pSchedPipeAvgPacketsInSequencer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets in the sequencer over the last sampling period" ::= { pSchedPipeEntry 3 } pSchedPipeAvgPacketsInShaper OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of packets in the shaper over the last sampling period" ::= { pSchedPipeEntry 4 } pSchedPipeFlowModsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a flow modification has been rejected" ::= { pSchedPipeEntry 5 } pSchedPipeFlowsClosed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flows that have been closed" ::= { pSchedPipeEntry 6 } pSchedPipeFlowsModified OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The of times a flow has been modified" ::= { pSchedPipeEntry 7 } pSchedPipeFlowsOpened OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flows opened on this pipe (some of which may now be closed)" ::= { pSchedPipeEntry 8 } pSchedPipeFlowsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flow creations that were rejected" ::= { pSchedPipeEntry 9 } pSchedPipeMaxPacketsInNetcard OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of packets ever simultaneously in the network card" ::= { pSchedPipeEntry 10 } pSchedPipeMaxPacketsInSequencer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of packets that have ever simultaneously been in the sequencer" ::= { pSchedPipeEntry 11 } pSchedPipeMaxPacketsInShaper OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of packets that have ever simultaneously been in the shaper" ::= { pSchedPipeEntry 12 } pSchedPipeMaxSimultaneousFlows OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of flows that have been simultaneously open on this pipe" ::= { pSchedPipeEntry 13 } pSchedPipeBadPacketsSched OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have entered the packet scheduler at a rate which exceeded that packet's flow parameters" ::= { pSchedPipeEntry 14 } pSchedPipeBadPacketsSchedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which nonconforming packets have entered the packet scheduler" ::= { pSchedPipeEntry 15 } pSchedPipeBadPacketsXmited OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets that have been sent by the packet scheduler at a rate which exceeded that packet's flow parameters" ::= { pSchedPipeEntry 16 } pSchedPipeBadPacketsXmitedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which nonconforming packets have been sent by the packet scheduler" ::= { pSchedPipeEntry 17 } pSchedPipeOutOfPackets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times Pacer has been unable to allocate a packet" ::= { pSchedPipeEntry 18 } rasTotal OBJECT-IDENTITY STATUS current DESCRIPTION "The RAS Total performance object consists of counters that combine values for all ports of the Remote Access Service (RAS) device on the computer." ::= { advanced 68 } rasTotalAlignmentErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Alignment Errors for this connection. Alignment Errors occur when a byte received is different from the byte expected." ::= { rasTotal 1 } rasTotalBufferOverrunErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Buffer Overrun Errors for this connection. Buffer Overrun Errors when the software cannot handle the rate at which data is received." ::= { rasTotal 2 } rasTotalBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received total for this connection." ::= { rasTotal 3 } rasTotalBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received per second." ::= { rasTotal 4 } rasTotalBytesTransmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted total for this connection." ::= { rasTotal 5 } rasTotalBytesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted per second." ::= { rasTotal 6 } rasTotalCRCErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC Errors for this connection. CRC Errors occur when the frame received contains erroneous data." ::= { rasTotal 7 } rasTotalFramesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data frames received total for this connection." ::= { rasTotal 8 } rasTotalFramesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received per second." ::= { rasTotal 9 } rasTotalFramesTransmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data frames transmitted total for this connection." ::= { rasTotal 10 } rasTotalFramesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted per second." ::= { rasTotal 11 } rasTotalPercentCompressionIn OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The compression ratio for bytes being received." ::= { rasTotal 12 } rasTotalPercentCompressionOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The compression ratio for bytes being transmitted." ::= { rasTotal 13 } rasTotalSerialOverrunErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Serial Overrun Errors for this connection. Serial Overrun Errors occur when the hardware cannot handle the rate at which data is received." ::= { rasTotal 14 } rasTotalTimeoutErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Timeout Errors for this connection. Timeout Errors occur when an expected is not received in time." ::= { rasTotal 15 } rasTotalTotalConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Remote Access connections." ::= { rasTotal 16 } rasTotalTotalErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors for this connection." ::= { rasTotal 17 } rasTotalTotalErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors per second." ::= { rasTotal 18 } rasPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RASPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The RAS Port performance object consists of counters that monitor individual Remote Access Service (RAS) ports of the RAS device on the system." ::= { advanced 69 } rasPortEntry OBJECT-TYPE SYNTAX RASPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'RAS Port' object." INDEX { rasPortInstance } ::= { rasPortTable 1 } RASPortEntry ::= SEQUENCE { rasPortInstance InstanceName, rasPortAlignmentErrors Gauge32, rasPortBufferOverrunErrors Gauge32, rasPortBytesReceived Gauge32, rasPortBytesReceivedPerSec Gauge32, rasPortBytesTransmitted Gauge32, rasPortBytesTransmittedPerSec Gauge32, rasPortCRCErrors Gauge32, rasPortFramesReceived Gauge32, rasPortFramesReceivedPerSec Gauge32, rasPortFramesTransmitted Gauge32, rasPortFramesTransmittedPerSec Gauge32, rasPortPercentCompressionIn Gauge32, rasPortPercentCompressionOut Gauge32, rasPortSerialOverrunErrors Gauge32, rasPortTimeoutErrors Gauge32, rasPortTotalErrors Gauge32, rasPortTotalErrorsPerSec Gauge32 } rasPortInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { rasPortEntry 1 } rasPortAlignmentErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Alignment Errors for this connection. Alignment Errors occur when a byte received is different from the byte expected." ::= { rasPortEntry 2 } rasPortBufferOverrunErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Buffer Overrun Errors for this connection. Buffer Overrun Errors when the software cannot handle the rate at which data is received." ::= { rasPortEntry 3 } rasPortBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received total for this connection." ::= { rasPortEntry 4 } rasPortBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes received per second." ::= { rasPortEntry 5 } rasPortBytesTransmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted total for this connection." ::= { rasPortEntry 6 } rasPortBytesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes transmitted per second." ::= { rasPortEntry 7 } rasPortCRCErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC Errors for this connection. CRC Errors occur when the frame received contains erroneous data." ::= { rasPortEntry 8 } rasPortFramesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data frames received total for this connection." ::= { rasPortEntry 9 } rasPortFramesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames received per second." ::= { rasPortEntry 10 } rasPortFramesTransmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data frames transmitted total for this connection." ::= { rasPortEntry 11 } rasPortFramesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames transmitted per second." ::= { rasPortEntry 12 } rasPortPercentCompressionIn OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The compression ratio for bytes being received." ::= { rasPortEntry 13 } rasPortPercentCompressionOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The compression ratio for bytes being transmitted." ::= { rasPortEntry 14 } rasPortSerialOverrunErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Serial Overrun Errors for this connection. Serial Overrun Errors occur when the hardware cannot handle the rate at which data is received." ::= { rasPortEntry 15 } rasPortTimeoutErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Timeout Errors for this connection. Timeout Errors occur when an expected is not received in time." ::= { rasPortEntry 16 } rasPortTotalErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors for this connection." ::= { rasPortEntry 17 } rasPortTotalErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of CRC, Timeout, Serial Overrun, Alignment, and Buffer Overrun Errors per second." ::= { rasPortEntry 18 } redirector OBJECT-IDENTITY STATUS current DESCRIPTION "The Redirector performance object consists of counters that monitor network connections originating at the local computer." ::= { advanced 70 } redirBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Received/sec is the rate of bytes coming in to the Redirector from the network. It includes all application data as well as network protocol information (such as packet headers)." ::= { redirector 1 } redirBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the rate the Redirector is processing data bytes. This includes all application and file data in addition to protocol information such as packet headers." ::= { redirector 2 } redirBytesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Transmitted/sec is the rate at which bytes are leaving the Redirector to the network. It includes all application data as well as network protocol information (such as packet headers and the like)." ::= { redirector 3 } redirConnectsCore OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connects Core counts the number of connections you have to servers running the original MS-Net SMB protocol, including MS-Net itself and Xenix and VAX's." ::= { redirector 4 } redirConnectsLanManager20 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connects LAN Manager 2.0 counts connections to LAN Manager 2.0 servers, including LMX servers." ::= { redirector 5 } redirConnectsLanManager21 OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connects LAN Manager 2.1 counts connections to LAN Manager 2.1 servers, including LMX servers." ::= { redirector 6 } redirConnectsWindowsNT OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connects Windows NT counts the connections to Windows 2000 or earlier computers." ::= { redirector 7 } redirCurrentCommands OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Commands counter indicates the number of pending commands from the local computer to all destination servers. If the Current Commands counter shows a high number and the local computer is idle, this may indicate a network-related problem or a redirector bottleneck on the local computer." ::= { redirector 8 } redirFileDataOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Data Operations/sec is the rate at which the Redirector is processing data operations. One operation should include many bytes, since each operation has overhead. The efficiency of this path can be determined by dividing the Bytes/sec by this counter to obtain the average number of bytes transferred per operation." ::= { redirector 9 } redirFileReadOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Read Operations/sec is the rate at which applications are asking the Redirector for data. Each call to a file system or similar Application Program Interface (API) call counts as one operation." ::= { redirector 10 } redirFileWriteOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Write Operations/sec is the rate at which applications are sending data to the Redirector. Each call to a file system or similar Application Program Interface (API) call counts as one operation." ::= { redirector 11 } redirNetworkErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Network Errors/sec is the rate at which serious unexpected errors are occurring. Such errors generally indicate that the Redirector and one or more Servers are having serious communication difficulties. For example an SMB (Server Manager Block) protocol error is a Network Error. An entry is written to the System Event Log and provide details." ::= { redirector 12 } redirPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received/sec is the rate at which the Redirector is receiving packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes received in a packet can be obtained by dividing Bytes Received/sec by this counter. Some packets received might not contain incoming data (for example an acknowledgment to a write made by the Redirector would count as an incoming packet)." ::= { redirector 13 } redirPacketsTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Transmitted/sec is the rate at which the Redirector is sending packets (also called SMBs or Server Message Blocks). Network transmissions are divided into packets. The average number of bytes transmitted in a packet can be obtained by dividing Bytes Transmitted/sec by this counter." ::= { redirector 14 } redirPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets/sec is the rate the Redirector is processing data packets. One packet includes (hopefully) many bytes. We say hopefully here because each packet has protocol overhead. You can determine the efficiency of this path by dividing the Bytes/sec by this counter to determine the average number of bytes transferred/packet. You can also divide this counter by Operations/sec to determine the average number of packets per operation, another measure of efficiency." ::= { redirector 15 } redirReadBytesCachePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Bytes Cache/sec is the rate at which applications are accessing the file system cache by using the Redirector. Some of these data requests are satisfied by retrieving the data from the cache. Requests that miss the Cache cause a page fault (see Read Bytes Paging/sec)." ::= { redirector 16 } redirReadBytesNetworkPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Bytes Network/sec is the rate at which applications are reading data across the network. This occurs when data sought in the file system cache is not found there and must be retrieved from the network. Dividing this value by Bytes Received/sec indicates the proportion of application data traveling across the network. (see Bytes Received/sec)." ::= { redirector 17 } redirReadBytesNonPagingPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Bytes Non-Paging/sec are those bytes read by the Redirector in response to normal file requests by an application when they are redirected to come from another computer. In addition to file requests, this counter includes other methods of reading across the network such as Named Pipes and Transactions. This counter does not count network protocol information, just application data." ::= { redirector 18 } redirReadBytesPagingPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Bytes Paging/sec is the rate at which the Redirector is attempting to read bytes in response to page faults. Page faults are caused by loading of modules (such as programs and libraries), by a miss in the Cache (see Read Bytes Cache/sec), or by files directly mapped into the address space of applications (a high-performance feature of Windows NT)." ::= { redirector 19 } redirReadOperationsRandomPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Operations Random/sec counts the rate at which, on a file-by-file basis, reads are made that are not sequential. If a read is made using a particular file handle, and then is followed by another read that is not immediately the contiguous next byte, this counter is incremented by one." ::= { redirector 20 } redirReadPacketsSmallPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Packets Small/sec is the rate at which reads less than one-fourth of the server's negotiated buffer size are made by applications. Too many of these could indicate a waste of buffers on the server. This counter is incremented once for each read. It does not count packets." ::= { redirector 21 } redirReadPacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Packets/sec is the rate at which read packets are being placed on the network. Each time a single packet is sent with a request to read data remotely, this counter is incremented by one." ::= { redirector 22 } redirReadsDeniedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reads Denied/sec is the rate at which the server is unable to accommodate requests for Raw Reads. When a read is much larger than the server's negotiated buffer size, the Redirector requests a Raw Read which, if granted, would permit the transfer of the data without lots of protocol overhead on each packet. To accomplish this the server must lock out other requests, so the request is denied if the server is really busy." ::= { redirector 23 } redirReadsLargePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Reads Large/sec is the rate at which reads over 2 times the server's negotiated buffer size are made by applications. Too many of these could place a strain on server resources. This counter is incremented once for each read. It does not count packets." ::= { redirector 24 } redirServerDisconnects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Disconnects counts the number of times a Server has disconnected your Redirector. See also Server Reconnects." ::= { redirector 25 } redirServerReconnects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Reconnects counts the number of times your Redirector has had to reconnect to a server in order to complete a new active request. You can be disconnected by the Server if you remain inactive for too long. Locally even if all your remote files are closed, the Redirector will keep your connections intact for (nominally) ten minutes. Such inactive connections are called Dormant Connections. Reconnecting is expensive in time." ::= { redirector 26 } redirServerSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Sessions counts the total number of security objects the Redirector has managed. For example, a logon to a server followed by a network access to the same server will establish one connection, but two sessions." ::= { redirector 27 } redirServerSessionsHung OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Server Sessions Hung counts the number of active sessions that are timed out and unable to proceed due to a lack of response from the remote server." ::= { redirector 28 } redirWriteBytesCachePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Bytes Cache/sec is the rate at which applications on your computer are writing to the file system cache by using the Redirector. The data might not leave your computer immediately; it can be retained in the cache for further modification before being written to the network. This saves network traffic. Each write of a byte into the cache is counted here." ::= { redirector 29 } redirWriteBytesNetworkPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Bytes Network/sec is the rate at which applications are writing data across the network. This occurs when the file system cache is bypassed, such as for Named Pipes or Transactions, or when the cache writes the bytes to disk to make room for other data. Dividing this counter by Bytes Transmitted/sec will indicate the proportion of application data being to the network (see Transmitted Bytes/sec)." ::= { redirector 30 } redirWriteBytesNonPagingPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Bytes Non-Paging/sec is the rate at which bytes are written by the Redirector in response to normal file outputs by an application when they are redirected to another computer. In addition to file requests, this count includes other methods of writing across the network, such as Named Pipes and Transactions. This counter does not count network protocol information, just application data." ::= { redirector 31 } redirWriteBytesPagingPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Bytes Paging/sec is the rate at which the Redirector is attempting to write bytes changed in the pages being used by applications. The program data changed by modules (such as programs and libraries) that were loaded over the network are 'paged out' when no longer needed. Other output pages come from the file system cache (see Write Bytes Cache/sec)." ::= { redirector 32 } redirWriteOperationsRandomPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Operations Random/sec is the rate at which, on a file-by-file basis, writes are made that are not sequential. If a write is made using a particular file handle, and then is followed by another write that is not immediately the next contiguous byte, this counter is incremented by one." ::= { redirector 33 } redirWritePacketsSmallPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Packets Small/sec is the rate at which writes are made by applications that are less than one-fourth of the server's negotiated buffer size. Too many of these could indicate a waste of buffers on the server. This counter is incremented once for each write: it counts writes, not packets." ::= { redirector 34 } redirWritePacketsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Packets/sec is the rate at which writes are being sent to the network. Each time a single packet is sent with a request to write remote data, this counter is incremented by one." ::= { redirector 35 } redirWritesDeniedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Writes Denied/sec is the rate at which the server is unable to accommodate requests for Raw Writes. When a write is much larger than the server's negotiated buffer size, the Redirector requests a Raw Write which, if granted, would permit the transfer of the data without lots of protocol overhead on each packet. To accomplish this the server must lock out other requests, so the request is denied if the server is really busy." ::= { redirector 36 } redirWritesLargePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Writes Large/sec is the rate at which writes are made by applications that are over 2 times the server's negotiated buffer size. Too many of these could place a strain on server resources. This counter is incremented once for each write: it counts writes, not packets." ::= { redirector 37 } rsvpInterfacesTable OBJECT-TYPE SYNTAX SEQUENCE OF RSVPInterfacesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "ACS/RSVP Interfaces performance object counters report statistics about RSVP activity, flow, bandwidth, RSVP messages sent, and so on. The ACS/RSVP Interfaces object is available if ACS is running and there is an object for each IP address on the system." ::= { advanced 71 } rsvpInterfacesEntry OBJECT-TYPE SYNTAX RSVPInterfacesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'RSVP Interfaces' object." INDEX { rsvpIfInstance } ::= { rsvpInterfacesTable 1 } RSVPInterfacesEntry ::= SEQUENCE { rsvpIfInstance InstanceName, rsvpIfBlockedRESVs Gauge32, rsvpIfGeneralFailures Gauge32, rsvpIfMaximumAdmittedBandwidth Gauge32, rsvpIfNumOfActiveFlows Gauge32, rsvpIfNumOfIncomingMsgsDropped Gauge32, rsvpIfNumOfOutgoingMsgsDropped Gauge32, rsvpIfPATHERRMsgsReceived Gauge32, rsvpIfPATHERRMsgsSent Gauge32, rsvpIfPATHTEARMsgsReceived Gauge32, rsvpIfPATHTEARMsgsSent Gauge32, rsvpIfPATHMsgsReceived Gauge32, rsvpIfPATHMsgsSent Gauge32, rsvpIfPATHStateBlockTimeouts Gauge32, rsvpIfPolicyControlFailures Gauge32, rsvpIfRESVCONFIRMMsgsReceived Gauge32, rsvpIfRESVCONFIRMMsgsSent Gauge32, rsvpIfRESVERRMsgsReceived Gauge32, rsvpIfRESVERRMsgsSent Gauge32, rsvpIfRESVTEARMsgsReceived Gauge32, rsvpIfRESVTEARMsgsSent Gauge32, rsvpIfRESVMsgsReceived Gauge32, rsvpIfRESVMsgsSent Gauge32, rsvpIfRESVStateBlockTimeouts Gauge32, rsvpIfReceiveMsgsErrorsBigMsgs Gauge32, rsvpIfReceiveMsgsErrorsNoMemory Gauge32, rsvpIfReservedBandwidth Gauge32, rsvpIfResourceControlFailures Gauge32, rsvpIfSendMsgsErrorsBigMsgs Gauge32, rsvpIfSendMsgsErrorsNoMemory Gauge32, rsvpIfSignalingBytesReceived Gauge32, rsvpIfSignalingBytesSent Gauge32 } rsvpIfInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { rsvpInterfacesEntry 1 } rsvpIfBlockedRESVs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of blockaded reservations that failed due to failed reservations that have not been removed from this node. For more information about blockade states, see RFC 2205." ::= { rsvpInterfacesEntry 2 } rsvpIfGeneralFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of non-admission control errors that have occurred on this interface. For more information about the other traffic control failures, see RFC 2205." ::= { rsvpInterfacesEntry 3 } rsvpIfMaximumAdmittedBandwidth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the highest amount of allocated bandwidth admitted on the interface during the period in which the ACS has been running." ::= { rsvpInterfacesEntry 4 } rsvpIfNumOfActiveFlows OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of reserved flows that are currently installed and maintained by RSVP on this interface." ::= { rsvpInterfacesEntry 5 } rsvpIfNumOfIncomingMsgsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of incoming messages dropped due to badly constructed RSVP objects etc." ::= { rsvpInterfacesEntry 6 } rsvpIfNumOfOutgoingMsgsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of outgoing messages dropped" ::= { rsvpInterfacesEntry 7 } rsvpIfPATHERRMsgsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of PATH error messages received on this interface. This number indicates the number of times that a PATH has been rejected by a remote host." ::= { rsvpInterfacesEntry 8 } rsvpIfPATHERRMsgsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of PATH ERR messages that were sent by the ACS/RSVP service rejecting incoming PATH messages." ::= { rsvpInterfacesEntry 9 } rsvpIfPATHTEARMsgsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of PATH TEAR messages that have been received on the interface. A PATH-TEAR message removes the PATH state along the route." ::= { rsvpInterfacesEntry 10 } rsvpIfPATHTEARMsgsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of PATH TEAR messages that were sent on the interface to tear down an RSVP PATH state in the network. A PATH-ERR messages indicates an error in response to the PATH message." ::= { rsvpInterfacesEntry 11 } rsvpIfPATHMsgsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of PATH messages that have been received on this interface." ::= { rsvpInterfacesEntry 12 } rsvpIfPATHMsgsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of PATH messages that were sent by the ACS/RSVP service on this the interface." ::= { rsvpInterfacesEntry 13 } rsvpIfPATHStateBlockTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of times that the RSVP PATH state timed out. This happens when no PATH messages are received within the designated timeout period. This error message can be caused by a route change." ::= { rsvpInterfacesEntry 14 } rsvpIfPolicyControlFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RSVP requests that are not admitted on this interface due to a conflict with policy settings." ::= { rsvpInterfacesEntry 15 } rsvpIfRESVCONFIRMMsgsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV CONFIRM messages that have been received by the interface." ::= { rsvpInterfacesEntry 16 } rsvpIfRESVCONFIRMMsgsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV CONFIRM messages that were sent on this interface in response to RESV messages sent from remote hosts." ::= { rsvpInterfacesEntry 17 } rsvpIfRESVERRMsgsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV ERR messages that were sent on this interface by the ACS/RSVP service. rejecting incoming RESV messages. A RESV-ERR message indicates an error in response to the RESV." ::= { rsvpInterfacesEntry 18 } rsvpIfRESVERRMsgsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV errors that were sent on this interface. This number indicates how many reservations have been rejected by the network." ::= { rsvpInterfacesEntry 19 } rsvpIfRESVTEARMsgsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV TEAR messages that have been received on the interface. A RESV-TEAR message removes the reservation along the route." ::= { rsvpInterfacesEntry 20 } rsvpIfRESVTEARMsgsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV TEAR messages that were sent on the interface to tear down a RESV state in the network." ::= { rsvpInterfacesEntry 21 } rsvpIfRESVMsgsReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV messages that have been received on this interface." ::= { rsvpInterfacesEntry 22 } rsvpIfRESVMsgsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of RESV messages that were sent by the ACS/RSVP service sent on this the interface" ::= { rsvpInterfacesEntry 23 } rsvpIfRESVStateBlockTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of times that the RSVP RESV state timed out. This happens when no RESV messages are received within the designated timeout period. This error message can be caused by a route change." ::= { rsvpInterfacesEntry 24 } rsvpIfReceiveMsgsErrorsBigMsgs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of outgoing RSVP messages that were dropped because they were bigger than the maximum configured RSVP message size." ::= { rsvpInterfacesEntry 25 } rsvpIfReceiveMsgsErrorsNoMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of outgoing RSVP messages that were dropped due to insufficient memory." ::= { rsvpInterfacesEntry 26 } rsvpIfReservedBandwidth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the reserved bandwidth for this interface, in bits per second." ::= { rsvpInterfacesEntry 27 } rsvpIfResourceControlFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of reservations that failed due to the lack of resources." ::= { rsvpInterfacesEntry 28 } rsvpIfSendMsgsErrorsBigMsgs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of outgoing RSVP messages that were dropped because they were bigger than the maximum configured RSVP message size." ::= { rsvpInterfacesEntry 29 } rsvpIfSendMsgsErrorsNoMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of outgoing RSVP messages that were dropped due to insufficient memory." ::= { rsvpInterfacesEntry 30 } rsvpIfSignalingBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total RSVP signaling traffic, in bytes, that have been received by the ACS/RSVP service on this interface." ::= { rsvpInterfacesEntry 31 } rsvpIfSignalingBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total RSVP signaling traffic, in bytes, that were sent by the ACS/RSVP service on this interface." ::= { rsvpInterfacesEntry 32 } rsvpServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF RSVPServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ACS/RSVP Service performance object counters report statistics about Resource Reservation Protocol (RSVP) and Quality of Service (QoS) Admission Control (ACS) activity, flow, bandwidth, RSVP messages sent, and so on. The ACS/RSVP Service object is available if QoS Admission Control is installed, even if the service is not running." ::= { advanced 72 } rsvpServiceEntry OBJECT-TYPE SYNTAX RSVPServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'RSVP Service' object." INDEX { rsvpSvcInstance } ::= { rsvpServiceTable 1 } RSVPServiceEntry ::= SEQUENCE { rsvpSvcInstance InstanceName, rsvpSvcBytesInQoSNotifications Gauge32, rsvpSvcFailedQoSRequests Gauge32, rsvpSvcFailedQoSSends Gauge32, rsvpSvcNetworkInterfaces Gauge32, rsvpSvcNetworkSockets Gauge32, rsvpSvcQoSClients Gauge32, rsvpSvcQoSNotifications Gauge32, rsvpSvcQoSenabledReceivers Gauge32, rsvpSvcQoSenabledSenders Gauge32, rsvpSvcRSVPSessions Gauge32, rsvpSvcTimers Gauge32 } rsvpSvcInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { rsvpServiceEntry 1 } rsvpSvcBytesInQoSNotifications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "A running total of the number of bytes delivered in QoS Notifications to QoS-enabled applications." ::= { rsvpServiceEntry 2 } rsvpSvcFailedQoSRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of QoS requests generated by QoS-enabled applications that have been rejected by the RSVP service. Failed QoS requests can be caused by invalid QoS requests." ::= { rsvpServiceEntry 3 } rsvpSvcFailedQoSSends OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of QoS notifications the RSVP service that could not be sent to the QoS applications. Failed QoS sends can be caused by terminated applications." ::= { rsvpServiceEntry 4 } rsvpSvcNetworkInterfaces OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of local network interfaces visible to, and used by the RSVP service." ::= { rsvpServiceEntry 5 } rsvpSvcNetworkSockets OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of raw sockets opened for the purpose of RSVP signaling." ::= { rsvpServiceEntry 6 } rsvpSvcQoSClients OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of QoS enabled applications currently active." ::= { rsvpServiceEntry 7 } rsvpSvcQoSNotifications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of QoS notifications delivered to QoS-enabled applications by the QoS RSVP service." ::= { rsvpServiceEntry 8 } rsvpSvcQoSenabledReceivers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of RESV messages sent for QoS-enabled receivers. This number increments each time a RESV is refreshed." ::= { rsvpServiceEntry 9 } rsvpSvcQoSenabledSenders OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the number of PATH messages sent for QoS-enabled senders. This number increments each time a PATH is refreshed." ::= { rsvpServiceEntry 10 } rsvpSvcRSVPSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of active RSVP sessions on the RSVP service." ::= { rsvpServiceEntry 11 } rsvpSvcTimers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of timer events scheduled to take place. Shows the activity level of the RSVP service." ::= { rsvpServiceEntry 12 } server OBJECT-IDENTITY STATUS current DESCRIPTION "The Server performance object consists of counters that measure communication between the local computer and the network." ::= { advanced 73 } serverBlockingRequestsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the server has rejected blocking SMBs due to insufficient count of free work items. Indicates whether the MaxWorkItem or MinFreeWorkItems server parameters might need to be adjusted." ::= { server 1 } serverBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes the server has received from the network. Indicates how busy the server is." ::= { server 2 } serverBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes the server has sent to and received from the network. This value provides an overall indication of how busy the server is." ::= { server 3 } serverBytesTransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes the server has sent on the network. Indicates how busy the server is." ::= { server 4 } serverContextBlocksQueuedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Context Blocks Queued per second is the rate at which work context blocks had to be placed on the server's FSP queue to await server action." ::= { server 5 } serverErrorsAccessPermissions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times opens on behalf of clients have failed with STATUS_ACCESS_DENIED. Can indicate whether somebody is randomly attempting to access files in hopes of getting at something that was not properly protected." ::= { server 6 } serverErrorsGrantedAccess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times accesses to files opened successfully were denied. Can indicate attempts to access files without proper access authorization." ::= { server 7 } serverErrorsLogon OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of failed logon attempts to the server. Can indicate whether password guessing programs are being used to crack the security on the server." ::= { server 8 } serverErrorsSystem OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times an internal Server Error was detected. Unexpected errors usually indicate a problem with the Server." ::= { server 9 } serverFileDirectorySearches OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of searches for files currently active in the server. Indicates current server activity." ::= { server 10 } serverFilesOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of files currently opened in the server. Indicates current server activity." ::= { server 11 } serverFilesOpenedTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of successful open attempts performed by the server of behalf of clients. Useful in determining the amount of file I/O, determining overhead for path-based operations, and for determining the effectiveness of open locks." ::= { server 12 } serverLogonTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Logon Total includes all interactive logons, network logons, service logons, successful logon, and failed logons since the machine is last rebooted." ::= { server 13 } serverLogonPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Logon/sec is the rate of all server logons." ::= { server 14 } serverPoolNonpagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes of non-pageable computer memory the server is using. This value is useful for determining the values of the MaxNonpagedMemoryUsage value entry in the WindowsNT Registry." ::= { server 15 } serverPoolNonpagedFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times allocations from nonpaged pool have failed. Indicates that the computer's physical memory is too small." ::= { server 16 } serverPoolNonpagedPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of bytes of nonpaged pool the server has had in use at any one point. Indicates how much physical memory the computer should have." ::= { server 17 } serverPoolPagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes of pageable computer memory the server is currently using. Can help in determining good values for the MaxPagedMemoryUsage parameter." ::= { server 18 } serverPoolPagedFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times allocations from paged pool have failed. Indicates that the computer's physical memory or paging file are too small." ::= { server 19 } serverPoolPagedPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of bytes of paged pool the server has had allocated. Indicates the proper sizes of the Page File(s) and physical memory." ::= { server 20 } serverServerSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions currently active in the server. Indicates current server activity." ::= { server 21 } serverSessionsErroredOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been closed due to unexpected error conditions or sessions that have reached the autodisconnect timeout and have been disconnected normally." ::= { server 22 } serverSessionsForcedOff OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been forced to logoff. Can indicate how many sessions were forced to logoff due to logon time constraints." ::= { server 23 } serverSessionsLoggedOff OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have terminated normally. Useful in interpreting the Sessions Times Out and Sessions Errored Out statistics--allows percentage calculations." ::= { server 24 } serverSessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been closed due to their idle time exceeding the AutoDisconnect parameter for the server. Shows whether the AutoDisconnect setting is helping to conserve resources." ::= { server 25 } serverWorkItemShortages OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times STATUS_DATA_NOT_ACCEPTED was returned at receive indication time. This occurs when no work item is available or can be allocated to service the incoming request. Indicates whether the InitWorkItems or MaxWorkItems parameters might need to be adjusted." ::= { server 26 } serverPoolNonpagedKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kilobytes of non-pageable computer memory the server is using. This value is useful for determining the values of the MaxNonpagedMemoryUsage value entry in the Windows NT Registry." ::= { server 27 } serverPoolNonpagedKBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of kilobytes of nonpaged pool the server has had in use at any one point. Indicates how much physical memory the computer should have." ::= { server 28 } serverPoolPagedKBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of kilobytes of pageable computer memory the server is currently using. Can help in determining good values for the MaxPagedMemoryUsage parameter." ::= { server 29 } serverPoolPagedKBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of kilobytes of paged pool the server has had allocated. Indicates the proper sizes of the Page File(s) and physical memory." ::= { server 30 } serverPoolNonpagedMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of megabytes of non-pageable computer memory the server is using. This value is useful for determining the values of the MaxNonpagedMemoryUsage value entry in the Windows NT Registry." ::= { server 31 } serverPoolNonpagedMBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of megabytes of nonpaged pool the server has had in use at any one point. Indicates how much physical memory the computer should have." ::= { server 32 } serverPoolPagedMBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of megabytes of pageable computer memory the server is currently using. Can help in determining good values for the MaxPagedMemoryUsage parameter." ::= { server 33 } serverPoolPagedMBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of megabytes of paged pool the server has had allocated. Indicates the proper sizes of the Page File(s) and physical memory." ::= { server 34 } serverWorkQueuesTable OBJECT-TYPE SYNTAX SEQUENCE OF ServerWorkQueuesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Server Work Queues performance object consists of counters that monitor the length of queues and objects in the queues." ::= { advanced 74 } serverWorkQueuesEntry OBJECT-TYPE SYNTAX ServerWorkQueuesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Server Work Queues' object." INDEX { swqInstance } ::= { serverWorkQueuesTable 1 } ServerWorkQueuesEntry ::= SEQUENCE { swqInstance InstanceName, swqActiveThreads Gauge32, swqAvailableThreads Gauge32, swqAvailableWorkItems Gauge32, swqBorrowedWorkItems Gauge32, swqBytesReceivedPerSec Gauge32, swqBytesSentPerSec Gauge32, swqBytesTransferredPerSec Gauge32, swqContextBlocksQueuedPerSec Gauge32, swqCurrentClients Gauge32, swqQueueLength Gauge32, swqReadBytesPerSec Gauge32, swqReadOperationsPerSec Gauge32, swqTotalBytesPerSec Gauge32, swqTotalOperationsPerSec Gauge32, swqWorkItemShortages Gauge32, swqWriteBytesPerSec Gauge32, swqWriteOperationsPerSec Gauge32 } swqInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { serverWorkQueuesEntry 1 } swqActiveThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Threads is the number of threads currently working on a request from the server client for this CPU. The system keeps this number as low as possible to minimize unnecessary context switching. This is an instantaneous count for the CPU, not an average over time." ::= { serverWorkQueuesEntry 2 } swqAvailableThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Available Threads is the number of server threads on this CPU not currently working on requests from a client. The server dynamically adjusts the number of threads to maximize server performance." ::= { serverWorkQueuesEntry 3 } swqAvailableWorkItems OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Every request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing. This is the instantaneous number of available work items for this CPU. A sustained near-zero value indicates the need to increase the MinFreeWorkItems registry value for the Server service. This value will always be 0 in the Blocking Queue instance." ::= { serverWorkQueuesEntry 4 } swqBorrowedWorkItems OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Every request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing. When a CPU runs out of work items, it borrows a free work item from another CPU. An increasing value of this running counter might indicate the need to increase the 'MaxWorkItems' or 'MinFreeWorkItems' registry values for the Server service. This value will always be 0 in the Blocking Queue instance." ::= { serverWorkQueuesEntry 5 } swqBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the Server is receiving bytes from the network clients on this CPU. This value is a measure of how busy the Server is." ::= { serverWorkQueuesEntry 6 } swqBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the Server is sending bytes to the network clients on this CPU. This value is a measure of how busy the Server is." ::= { serverWorkQueuesEntry 7 } swqBytesTransferredPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which the Server is sending and receiving bytes with the network clients on this CPU. This value is a measure of how busy the Server is." ::= { serverWorkQueuesEntry 8 } swqContextBlocksQueuedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Context Blocks Queued per second is the rate at which work context blocks had to be placed on the server's FSP queue to await server action." ::= { serverWorkQueuesEntry 9 } swqCurrentClients OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Clients is the instantaneous count of the clients being serviced by this CPU. The server actively balances the client load across all of the CPU's in the system. This value will always be 0 in the Blocking Queue instance." ::= { serverWorkQueuesEntry 10 } swqQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Queue Length is the current length of the server work queue for this CPU. A sustained queue length greater than four might indicate processor congestion. This is an instantaneous count, not an average over time." ::= { serverWorkQueuesEntry 11 } swqReadBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Bytes/sec is the rate the server is reading data from files for the clients on this CPU. This value is a measure of how busy the Server is." ::= { serverWorkQueuesEntry 12 } swqReadOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Read Operations/sec is the rate the server is performing file read operations for the clients on this CPU. This value is a measure of how busy the Server is. This value will always be 0 in the Blocking Queue instance." ::= { serverWorkQueuesEntry 13 } swqTotalBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Bytes/sec is the rate the Server is reading and writing data to and from the files for the clients on this CPU. This value is a measure of how busy the Server is." ::= { serverWorkQueuesEntry 14 } swqTotalOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Operations/sec is the rate the Server is performing file read and file write operations for the clients on this CPU. This value is a measure of how busy the Server is. This value will always be 0 in the Blocking Queue instance." ::= { serverWorkQueuesEntry 15 } swqWorkItemShortages OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Every request from a client is represented in the server as a 'work item,' and the server maintains a pool of available work items per CPU to speed processing. A sustained value greater than zero indicates the need to increase the 'MaxWorkItems' registry value for the Server service. This value will always be 0 in the Blocking Queue instance." ::= { serverWorkQueuesEntry 16 } swqWriteBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Bytes/sec is the rate the server is writing data to files for the clients on this CPU. This value is a measure of how busy the Server is." ::= { serverWorkQueuesEntry 17 } swqWriteOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Write Operations/sec is the rate the server is performing file write operations for the clients on this CPU. This value is a measure of how busy the Server is. This value will always be 0 in the Blocking Queue instance." ::= { serverWorkQueuesEntry 18 } smtpNTFSStoreDriverTable OBJECT-TYPE SYNTAX SEQUENCE OF SMTPNTFSStoreDriverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SMTP NTFS Store Driver performance object counters describe activity of the Exchange NTFS store driver, which is responsible for message transport to and from the message store." ::= { advanced 75 } smtpNTFSStoreDriverEntry OBJECT-TYPE SYNTAX SMTPNTFSStoreDriverEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'SMTP NTFS Store Driver' object." INDEX { snsdInstance } ::= { smtpNTFSStoreDriverTable 1 } SMTPNTFSStoreDriverEntry ::= SEQUENCE { snsdInstance InstanceName, snsdMessagesAllocated Gauge32, snsdMessagesDeleted Gauge32, snsdMessagesEnumerated Gauge32, snsdMessagesInTheQueueDirectory Gauge32, snsdOpenMessageBodies Gauge32, snsdOpenMessageStreams Gauge32 } snsdInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { smtpNTFSStoreDriverEntry 1 } snsdMessagesAllocated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages allocated." ::= { smtpNTFSStoreDriverEntry 2 } snsdMessagesDeleted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages deleted." ::= { smtpNTFSStoreDriverEntry 3 } snsdMessagesEnumerated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages enumerated during startup." ::= { smtpNTFSStoreDriverEntry 4 } snsdMessagesInTheQueueDirectory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of messages in the queue directory." ::= { smtpNTFSStoreDriverEntry 5 } snsdOpenMessageBodies OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of open message bodies." ::= { smtpNTFSStoreDriverEntry 6 } snsdOpenMessageStreams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of open message streams." ::= { smtpNTFSStoreDriverEntry 7 } smtpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SMTPServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SMTP Server performance object monitors message activity generated by the Simple Mail Transport Protocol (SMTP) service, that can be installed as part of Windows 2000 Server." ::= { advanced 76 } smtpServerEntry OBJECT-TYPE SYNTAX SMTPServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'SMTP Server' object." INDEX { smtpSrvrInstance } ::= { smtpServerTable 1 } SMTPServerEntry ::= SEQUENCE { smtpSrvrInstance InstanceName, smtpSrvrPercentRcpntsLocal Gauge32, smtpSrvrPercentRcpntsRemote Gauge32, smtpSrvrAvgRcpntsPerMsgRcvd Gauge32, smtpSrvrAvgRcpntsPerMsgSent Gauge32, smtpSrvrAvgRetriesPerMsgDlvrd Gauge32, smtpSrvrAvgRetriesPerMsgSent Gauge32, smtpSrvrBadMailMsgsBadPickupFile Gauge32, smtpSrvrBadMailMsgsGeneralFail Gauge32, smtpSrvrBadMailMsgsHopCntExceed Gauge32, smtpSrvrBadMailMsgsNDROfDSN Gauge32, smtpSrvrBadMailMsgsNoRcpnts Gauge32, smtpSrvrBadMailMsgsTrigViaEvent Gauge32, smtpSrvrBytesRcvdTotal Gauge32, smtpSrvrBytesRcvdPerSec Gauge32, smtpSrvrBytesSentTotal Gauge32, smtpSrvrBytesSentPerSec Gauge32, smtpSrvrBytesTotal Gauge32, smtpSrvrBytesTotalPerSec Gauge32, smtpSrvrCatAddrLookupCmplt Gauge32, smtpSrvrCatAddrLookupCmpltPerSec Gauge32, smtpSrvrCatAddrLookups Gauge32, smtpSrvrCatAddrLookupsNotFound Gauge32, smtpSrvrCatAddrLookupsPerSec Gauge32, smtpSrvrCatCatsCmpltd Gauge32, smtpSrvrCatCatsCmpltdSuccess Gauge32, smtpSrvrCatCatsCmpltdPerSec Gauge32, smtpSrvrCatCatsFailDSConnFail Gauge32, smtpSrvrCatCatsFailDSLogonFail Gauge32, smtpSrvrCatCatsFailOutOfMemory Gauge32, smtpSrvrCatCatsFailNonRetryError Gauge32, smtpSrvrCatCatsFailRetryError Gauge32, smtpSrvrCatCatsFailSinkRetryErr Gauge32, smtpSrvrCatCatsInProgress Gauge32, smtpSrvrCatLDAPBindFail Gauge32, smtpSrvrCatLDAPBinds Gauge32, smtpSrvrCatLDAPConnFail Gauge32, smtpSrvrCatLDAPConns Gauge32, smtpSrvrCatLDAPConnsCurrOpen Gauge32, smtpSrvrCatLDAPGeneralCmpltFail Gauge32, smtpSrvrCatLDAPPageSrchCmpltFail Gauge32, smtpSrvrCatLDAPPagedSrchFail Gauge32, smtpSrvrCatLDAPPagedSrchs Gauge32, smtpSrvrCatLDAPPagedSrchsCmpltd Gauge32, smtpSrvrCatLDAPSrchCmpltFail Gauge32, smtpSrvrCatLDAPSrchFail Gauge32, smtpSrvrCatLDAPSrchs Gauge32, smtpSrvrCatLDAPSrchsAbandoned Gauge32, smtpSrvrCatLDAPSrchsCmpltd Gauge32, smtpSrvrCatLDAPSrchsCmpltdPerSec Gauge32, smtpSrvrCatLDAPSrchsPendingCmplt Gauge32, smtpSrvrCatLDAPSrchsPerSec Gauge32, smtpSrvrCatMsgsCategorized Gauge32, smtpSrvrCatMsgsAborted Gauge32, smtpSrvrCatMsgsBifurcated Gauge32, smtpSrvrCatMsgsSubmitted Gauge32, smtpSrvrCatMsgsSubmittedPerSec Gauge32, smtpSrvrCatRcptsNDRdAmbigsAddr Gauge32, smtpSrvrCatRcptsNDRdForwardLoop Gauge32, smtpSrvrCatRcptsNDRdIllegalAddr Gauge32, smtpSrvrCatRcptsNDRdSinkRecipErr Gauge32, smtpSrvrCatRcptsNDRdUnresolved Gauge32, smtpSrvrCatRcptsNDRdByCategorize Gauge32, smtpSrvrCatRcptsAfterCat Gauge32, smtpSrvrCatRcptsBeforeCat Gauge32, smtpSrvrCatRcptsInCat Gauge32, smtpSrvrCatSendersUnresolved Gauge32, smtpSrvrCatSendersAmbigsAddr Gauge32, smtpSrvrCatMailmsgDupCollisions Gauge32, smtpSrvrCategorizerQueueLength Gauge32, smtpSrvrConnErrorsPerSec Gauge32, smtpSrvrCurrentMsgsInLocalDlvry Gauge32, smtpSrvrDNSQueriesTotal Gauge32, smtpSrvrDNSQueriesPerSec Gauge32, smtpSrvrDirDropsTotal Gauge32, smtpSrvrDirDropsPerSec Gauge32, smtpSrvrETRNMsgsTotal Gauge32, smtpSrvrETRNMsgsPerSec Gauge32, smtpSrvrInboundConnsCurrent Gauge32, smtpSrvrInboundConnsTotal Gauge32, smtpSrvrLocalQueueLength Gauge32, smtpSrvrLocalRetryQueueLength Gauge32, smtpSrvrMsgBytesRcvdTotal Gauge32, smtpSrvrMsgBytesRcvdPerSec Gauge32, smtpSrvrMsgBytesSentTotal Gauge32, smtpSrvrMsgBytesSentPerSec Gauge32, smtpSrvrMsgBytesTotal Gauge32, smtpSrvrMsgBytesTotalPerSec Gauge32, smtpSrvrMsgDlvryRetries Gauge32, smtpSrvrMsgSendRetries Gauge32, smtpSrvrMsgsCurrUndeliverable Gauge32, smtpSrvrMsgsDlvrdTotal Gauge32, smtpSrvrMsgsDlvrdPerSec Gauge32, smtpSrvrMsgsPendingRoute Gauge32, smtpSrvrMsgsRcvdTotal Gauge32, smtpSrvrMsgsRcvdPerSec Gauge32, smtpSrvrMsgsRfsdForAddrObjects Gauge32, smtpSrvrMsgsRfsdForMailObjects Gauge32, smtpSrvrMsgsRfsdForSize Gauge32, smtpSrvrMsgsSentTotal Gauge32, smtpSrvrMsgsSentPerSec Gauge32, smtpSrvrNDRsGenerated Gauge32, smtpSrvrNumberOfMailFilesOpen Gauge32, smtpSrvrNumberOfQueueFilesOpen Gauge32, smtpSrvrOutboundConnsCurrent Gauge32, smtpSrvrOutboundConnsRfsd Gauge32, smtpSrvrOutboundConnsTotal Gauge32, smtpSrvrPickupDirMsgsRtrvdTotal Gauge32, smtpSrvrPickupDirMsgsRtrvdPerSec Gauge32, smtpSrvrRemoteQueueLength Gauge32, smtpSrvrRemoteRetryQueueLength Gauge32, smtpSrvrRouteTableLookupsTotal Gauge32, smtpSrvrRouteTableLookupsPerSec Gauge32, smtpSrvrTotalConnErrors Gauge32, smtpSrvrTotalDSNFail Gauge32, smtpSrvrTotalMsgsSubmitted Gauge32 } smtpSrvrInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { smtpServerEntry 1 } smtpSrvrPercentRcpntsLocal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The percentage of recipients that will be delivered locally." ::= { smtpServerEntry 2 } smtpSrvrPercentRcpntsRemote OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Thepercentage of recipients that will be delivered remotely." ::= { smtpServerEntry 3 } smtpSrvrAvgRcpntsPerMsgRcvd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of recipients per inbound message received." ::= { smtpServerEntry 4 } smtpSrvrAvgRcpntsPerMsgSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of recipients per outbound messages sent." ::= { smtpServerEntry 5 } smtpSrvrAvgRetriesPerMsgDlvrd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of retries per local delivery." ::= { smtpServerEntry 6 } smtpSrvrAvgRetriesPerMsgSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average number of retries per outbound message sent." ::= { smtpServerEntry 7 } smtpSrvrBadMailMsgsBadPickupFile OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of malformed pickup messages sent to badmail." ::= { smtpServerEntry 8 } smtpSrvrBadMailMsgsGeneralFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages sent to badmail for reasons not associated with a specific counter." ::= { smtpServerEntry 9 } smtpSrvrBadMailMsgsHopCntExceed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages sent to badmil becuase they had exceeded the maximum hop count." ::= { smtpServerEntry 10 } smtpSrvrBadMailMsgsNDROfDSN OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Delivery Status Notifications sent to badmail becuase they could not be delivered." ::= { smtpServerEntry 11 } smtpSrvrBadMailMsgsNoRcpnts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages sent to badmail because they had no recipients." ::= { smtpServerEntry 12 } smtpSrvrBadMailMsgsTrigViaEvent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages sent to badmail at the request of a server event sink." ::= { smtpServerEntry 13 } smtpSrvrBytesRcvdTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received." ::= { smtpServerEntry 14 } smtpSrvrBytesRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that bytes are received." ::= { smtpServerEntry 15 } smtpSrvrBytesSentTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent." ::= { smtpServerEntry 16 } smtpSrvrBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that bytes are sent." ::= { smtpServerEntry 17 } smtpSrvrBytesTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent and received." ::= { smtpServerEntry 18 } smtpSrvrBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that bytes are sent and received." ::= { smtpServerEntry 19 } smtpSrvrCatAddrLookupCmplt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of address lookup completions processed" ::= { smtpServerEntry 20 } smtpSrvrCatAddrLookupCmpltPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of address lookup completions processed per second" ::= { smtpServerEntry 21 } smtpSrvrCatAddrLookups OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DS lookups for individual addresses" ::= { smtpServerEntry 22 } smtpSrvrCatAddrLookupsNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of address lookups that did not find any DS object" ::= { smtpServerEntry 23 } smtpSrvrCatAddrLookupsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of address lookups dispatched to the DS per second" ::= { smtpServerEntry 24 } smtpSrvrCatCatsCmpltd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages submitted to categorizer that have finished categorization." ::= { smtpServerEntry 25 } smtpSrvrCatCatsCmpltdSuccess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations that completed without any errors." ::= { smtpServerEntry 26 } smtpSrvrCatCatsCmpltdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of categorizations completed." ::= { smtpServerEntry 27 } smtpSrvrCatCatsFailDSConnFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations that failed due to a DS connection failure" ::= { smtpServerEntry 28 } smtpSrvrCatCatsFailDSLogonFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations that failed due to a DS logon failure" ::= { smtpServerEntry 29 } smtpSrvrCatCatsFailOutOfMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations that failed due to lack of available memory." ::= { smtpServerEntry 30 } smtpSrvrCatCatsFailNonRetryError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations that failed with a hard error (not retryable)." ::= { smtpServerEntry 31 } smtpSrvrCatCatsFailRetryError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations that failed with a retryable error." ::= { smtpServerEntry 32 } smtpSrvrCatCatsFailSinkRetryErr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations that failed with a generic retryable error" ::= { smtpServerEntry 33 } smtpSrvrCatCatsInProgress OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of categorizations in progress." ::= { smtpServerEntry 34 } smtpSrvrCatLDAPBindFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LDAP bind failures" ::= { smtpServerEntry 35 } smtpSrvrCatLDAPBinds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of successfull LDAP binds performed" ::= { smtpServerEntry 36 } smtpSrvrCatLDAPConnFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failures encountered connection to LDAP servers" ::= { smtpServerEntry 37 } smtpSrvrCatLDAPConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of LDAP connections opened" ::= { smtpServerEntry 38 } smtpSrvrCatLDAPConnsCurrOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of LDAP connections currently open" ::= { smtpServerEntry 39 } smtpSrvrCatLDAPGeneralCmpltFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LDAP completions with a generic failure" ::= { smtpServerEntry 40 } smtpSrvrCatLDAPPageSrchCmpltFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LDAP paged searches that completed with a failure" ::= { smtpServerEntry 41 } smtpSrvrCatLDAPPagedSrchFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failures to dispatch an async paged LDAP search" ::= { smtpServerEntry 42 } smtpSrvrCatLDAPPagedSrchs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP paged searches successfully dispatched" ::= { smtpServerEntry 43 } smtpSrvrCatLDAPPagedSrchsCmpltd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of paged LDAP completions processed" ::= { smtpServerEntry 44 } smtpSrvrCatLDAPSrchCmpltFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LDAP searches that completed with a failure" ::= { smtpServerEntry 45 } smtpSrvrCatLDAPSrchFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failures to dispatch an async LDAP search" ::= { smtpServerEntry 46 } smtpSrvrCatLDAPSrchs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP searches successfully dispatched" ::= { smtpServerEntry 47 } smtpSrvrCatLDAPSrchsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LDAP searches abandoned" ::= { smtpServerEntry 48 } smtpSrvrCatLDAPSrchsCmpltd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LDAP search completions processed" ::= { smtpServerEntry 49 } smtpSrvrCatLDAPSrchsCmpltdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP search completions processed/sec" ::= { smtpServerEntry 50 } smtpSrvrCatLDAPSrchsPendingCmplt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LDAP searches pending async completon" ::= { smtpServerEntry 51 } smtpSrvrCatLDAPSrchsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "LDAP searches successfully dispatched/sec" ::= { smtpServerEntry 52 } smtpSrvrCatMsgsCategorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages categorizer has submitted to queueing." ::= { smtpServerEntry 53 } smtpSrvrCatMsgsAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages marked to be aborted by the categorizer." ::= { smtpServerEntry 54 } smtpSrvrCatMsgsBifurcated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of new messages created by the categorizer (bifurcation)." ::= { smtpServerEntry 55 } smtpSrvrCatMsgsSubmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages submitted to the categorizer." ::= { smtpServerEntry 56 } smtpSrvrCatMsgsSubmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that messages are being submitted to the categorizer." ::= { smtpServerEntry 57 } smtpSrvrCatRcptsNDRdAmbigsAddr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recipients with addresses that match multiple DS objects." ::= { smtpServerEntry 58 } smtpSrvrCatRcptsNDRdForwardLoop OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recipients NDRd by the categorizer due to a forwarding loop detection." ::= { smtpServerEntry 59 } smtpSrvrCatRcptsNDRdIllegalAddr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recipients with illegal addresses detected by the categorizer." ::= { smtpServerEntry 60 } smtpSrvrCatRcptsNDRdSinkRecipErr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recipients NDRd by the categorizer due to a generic recipient failure." ::= { smtpServerEntry 61 } smtpSrvrCatRcptsNDRdUnresolved OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of unresolved recipients (local addresses not found)." ::= { smtpServerEntry 62 } smtpSrvrCatRcptsNDRdByCategorize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recipients set to be NDRd by the categorizer." ::= { smtpServerEntry 63 } smtpSrvrCatRcptsAfterCat OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of mailmsg recipients submitted from categorizer to queueing." ::= { smtpServerEntry 64 } smtpSrvrCatRcptsBeforeCat OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of mailmsg recipients submitted to categorizer." ::= { smtpServerEntry 65 } smtpSrvrCatRcptsInCat OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of recipients the categorizer is currently processing." ::= { smtpServerEntry 66 } smtpSrvrCatSendersUnresolved OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seners not find in the DS." ::= { smtpServerEntry 67 } smtpSrvrCatSendersAmbigsAddr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of senders with addresses that match multiple DS objects." ::= { smtpServerEntry 68 } smtpSrvrCatMailmsgDupCollisions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a duplicate recipient address was detected by mailmsg/categorizer." ::= { smtpServerEntry 69 } smtpSrvrCategorizerQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages in the categorizer queue." ::= { smtpServerEntry 70 } smtpSrvrConnErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connection errors per second." ::= { smtpServerEntry 71 } smtpSrvrCurrentMsgsInLocalDlvry OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that are currently being processed by a server event sink for local delivery." ::= { smtpServerEntry 72 } smtpSrvrDNSQueriesTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of DNS lookups." ::= { smtpServerEntry 73 } smtpSrvrDNSQueriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of DNS lookups." ::= { smtpServerEntry 74 } smtpSrvrDirDropsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages placed in a drop directory." ::= { smtpServerEntry 75 } smtpSrvrDirDropsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages placed in a drop directory per second." ::= { smtpServerEntry 76 } smtpSrvrETRNMsgsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of ETRN messages received by the server." ::= { smtpServerEntry 77 } smtpSrvrETRNMsgsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ETRN messages per second." ::= { smtpServerEntry 78 } smtpSrvrInboundConnsCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections currently inbound." ::= { smtpServerEntry 79 } smtpSrvrInboundConnsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound connections received." ::= { smtpServerEntry 80 } smtpSrvrLocalQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages in the local queue." ::= { smtpServerEntry 81 } smtpSrvrLocalRetryQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages in the local retry queue." ::= { smtpServerEntry 82 } smtpSrvrMsgBytesRcvdTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes received in messages." ::= { smtpServerEntry 83 } smtpSrvrMsgBytesRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that bytes are received in messages." ::= { smtpServerEntry 84 } smtpSrvrMsgBytesSentTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent in messages." ::= { smtpServerEntry 85 } smtpSrvrMsgBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that bytes are sent in messages." ::= { smtpServerEntry 86 } smtpSrvrMsgBytesTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes sent and received in messages." ::= { smtpServerEntry 87 } smtpSrvrMsgBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that bytes are sent and received in messages." ::= { smtpServerEntry 88 } smtpSrvrMsgDlvryRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of local deliveries that were retried." ::= { smtpServerEntry 89 } smtpSrvrMsgSendRetries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outbound message sends that were retried." ::= { smtpServerEntry 90 } smtpSrvrMsgsCurrUndeliverable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that have been reported as currently undeliverable by routing." ::= { smtpServerEntry 91 } smtpSrvrMsgsDlvrdTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages delivered to local mailboxes." ::= { smtpServerEntry 92 } smtpSrvrMsgsDlvrdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that messages are delivered to local mailboxes." ::= { smtpServerEntry 93 } smtpSrvrMsgsPendingRoute OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages that have been categorized but not routed." ::= { smtpServerEntry 94 } smtpSrvrMsgsRcvdTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of inbound messages accepted." ::= { smtpServerEntry 95 } smtpSrvrMsgsRcvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that inbound messages are being received." ::= { smtpServerEntry 96 } smtpSrvrMsgsRfsdForAddrObjects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages refused due to no address objects." ::= { smtpServerEntry 97 } smtpSrvrMsgsRfsdForMailObjects OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages refused due to no mail objects." ::= { smtpServerEntry 98 } smtpSrvrMsgsRfsdForSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages rejected because they were too big." ::= { smtpServerEntry 99 } smtpSrvrMsgsSentTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outbound messages sent." ::= { smtpServerEntry 100 } smtpSrvrMsgsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that outbound messages are being sent." ::= { smtpServerEntry 101 } smtpSrvrNDRsGenerated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-delivery reports that have been generated." ::= { smtpServerEntry 102 } smtpSrvrNumberOfMailFilesOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of handles to open mail files." ::= { smtpServerEntry 103 } smtpSrvrNumberOfQueueFilesOpen OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of handles to open queue files." ::= { smtpServerEntry 104 } smtpSrvrOutboundConnsCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connections currently outbound." ::= { smtpServerEntry 105 } smtpSrvrOutboundConnsRfsd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of outbound connection attempts refused by remote sites." ::= { smtpServerEntry 106 } smtpSrvrOutboundConnsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of outbound connections attempted." ::= { smtpServerEntry 107 } smtpSrvrPickupDirMsgsRtrvdTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of messages retrieved from the mail pick-up directory." ::= { smtpServerEntry 108 } smtpSrvrPickupDirMsgsRtrvdPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that messages are being retrieved from the mail pick-up directory." ::= { smtpServerEntry 109 } smtpSrvrRemoteQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages in the remote queue." ::= { smtpServerEntry 110 } smtpSrvrRemoteRetryQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages in the retry queue for remote delivery." ::= { smtpServerEntry 111 } smtpSrvrRouteTableLookupsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of routing table lookups." ::= { smtpServerEntry 112 } smtpSrvrRouteTableLookupsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of routing table lookups per second." ::= { smtpServerEntry 113 } smtpSrvrTotalConnErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connection errors." ::= { smtpServerEntry 114 } smtpSrvrTotalDSNFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failed DSN generation attempts." ::= { smtpServerEntry 115 } smtpSrvrTotalMsgsSubmitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total messages submitted to queuing for delivery." ::= { smtpServerEntry 116 } system OBJECT-IDENTITY STATUS current DESCRIPTION "The System performance object consists of counters that apply to more than one component of the computer. Percentage counters by default do not show values above 100 percent. See 'Overview of Performance Monitoring' in the Windows 2000 Server Resource Kit Server Operations Guide for instructions about changing this default in the registry." ::= { advanced 77 } systemPercentRegistryQuotaInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Registry Quota In Use is the percentage of the Total Registry Quota Allowed that is currently being used by the system. This counter displays the current percentage value only; it is not an average." ::= { system 1 } systemAlignmentFixupsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Alignment Fixups/sec is the rate, in incidents per seconds, at alignment faults were fixed by the system." ::= { system 2 } systemContextSwitchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Context Switches/sec is the combined rate at which all processors on the computer are switched from one thread to another. Context switches occur when a running thread voluntarily relinquishes the processor, is preempted by a higher priority ready thread, or switches between user-mode and privileged (kernel) mode to use an Executive or subsystem service. It is the sum of Thread\\Context Switches/sec for all threads running on all processors in the computer and is measured in numbers of switches. There are context switch counters on the System and Thread objects. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 3 } systemExceptionDispatchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Exception Dispatches/sec is the rate, in incidents per second, at which exceptions were dispatched by the system." ::= { system 4 } systemFileControlBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Control Bytes/sec is the overall rate at which bytes are transferred for all file system operations that are neither reads nor writes, including file system control requests and requests for information about device characteristics or status. It is measured in numbers of bytes. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 5 } systemFileControlOperationPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Control Operations/sec is the combined rate of file system operations that are neither reads nor writes, such as file system control requests and requests for information about device characteristics or status. This is the inverse of System: File Data Operations/sec and is measured in number of operations perf second. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 6 } systemFileDataOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Data Operations/ sec is the combined rate of read and write operations on all logical disks on the computer. This is the inverse of System: File Control Operations/sec. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 7 } systemFileReadBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Read Bytes/sec is the overall rate at which bytes are read to satisfy file system read requests to all devices on the computer, including reads from the file system cache. It is measured in number of bytes per second. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 8 } systemFileReadOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Read Operations/sec is the combined rate of file system read requests to all devices on the computer, including requests to read from the file system cache. It is measured in numbers of reads. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 9 } systemFileWriteBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Write Bytes/sec is the overall rate at which bytes are written to satisfy file system write requests to all devices on the computer, including writes to the file system cache. It is measured in number of bytes per second. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 10 } systemFileWriteOperationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "File Write Operations/sec is the combined rate of the file system write requests to all devices on the computer, including requests to write to data in the file system cache. It is measured in numbers of writes. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 11 } systemFloatingEmulationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Floating Emulations/sec is the rate of floating emulations performed by the system. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 12 } systemProcesses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Processes is the number of processes in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. Each process represents the running of a program." ::= { system 13 } systemProcessorQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Processor Queue Length is the number of threads in the processor queue. Unlike the disk counters, this counter counters, this counter shows ready threads only, not threads that are running. There is a single queue for processor time even on computers with multiple processors. Therefore, if a computer has multiple processors, you need to divide this value by the number of processors servicing the workload. A sustained processor queue of less than 10 threads per processor is normally acceptable, dependent of the workload." ::= { system 14 } systemSystemCallsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Calls/sec is the combined rate of calls to operating system service routines by all processes running on the computer. These routines perform all of the basic scheduling and synchronization of activities on the computer, and provide access to non-graphic devices, memory management, and name space management. This counter displays the difference between the values observed in the last two samples, divided by the duration of the sample interval." ::= { system 15 } systemSystemUpTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "System Up Time is the elapsed time (in seconds) that the computer has been running since it was last started. This counter displays the difference between the start time and the current time." ::= { system 16 } systemThreads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Threads is the number of threads in the computer at the time of data collection. This is an instantaneous count, not an average over the time interval. A thread is the basic executable entity that can execute instructions in a processor." ::= { system 17 } tcpV4 OBJECT-IDENTITY STATUS current DESCRIPTION "The TCP performance object consists of counters that measure the rates at which TCP segments are sent and received using the Transmission Control Protocol (TCP). It includes counters that monitor the number of TCP connections in each TCP connection state." ::= { advanced 78 } tcpV4ConnectionFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connection Failures is the number of times TCP connections have made a direct transition to the CLOSED state from the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state." ::= { tcpV4 1 } tcpV4ConnectionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Active is the number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. In other words, it shows a number of connections which are initiated by the local computer. The value is a cumulative total." ::= { tcpV4 2 } tcpV4ConnectionsEstablished OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Established is the number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT." ::= { tcpV4 3 } tcpV4ConnectionsPassive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Passive is the number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. In other words, it shows a number of connections to the local computer, which are initiated by remote computers. The value is a cumulative total." ::= { tcpV4 4 } tcpV4ConnectionsReset OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Reset is the number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state." ::= { tcpV4 5 } tcpV4SegmentsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments Received/sec is the rate at which segments are received, including those received in error. This count includes segments received on currently established connections." ::= { tcpV4 6 } tcpV4SegmentsRetransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments Retransmitted/sec is the rate at which segments are retransmitted, that is, segments transmitted containing one or more previously transmitted bytes." ::= { tcpV4 7 } tcpV4SegmentsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments Sent/sec is the rate at which segments are sent, including those on current connections, but excluding those containing only retransmitted bytes." ::= { tcpV4 8 } tcpV4SegmentsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments/sec is the rate at which TCP segments are sent or received using the TCP protocol." ::= { tcpV4 9 } tcpV6 OBJECT IDENTIFIER ::= { advanced 79 } tcpV6ConnectionFailures OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connection Failures is the number of times TCP connections have made a direct transition to the CLOSED state from the SYN-SENT state or the SYN-RCVD state, plus the number of times TCP connections have made a direct transition to the LISTEN state from the SYN-RCVD state." ::= { tcpV6 1 } tcpV6ConnectionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Active is the number of times TCP connections have made a direct transition to the SYN-SENT state from the CLOSED state. In other words, it shows a number of connections which are initiated by the local computer. The value is a cumulative total." ::= { tcpV6 2 } tcpV6ConnectionsEstablished OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Established is the number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT." ::= { tcpV6 3 } tcpV6ConnectionsPassive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Passive is the number of times TCP connections have made a direct transition to the SYN-RCVD state from the LISTEN state. In other words, it shows a number of connections to the local computer, which are initiated by remote computers. The value is a cumulative total." ::= { tcpV6 4 } tcpV6ConnectionsReset OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Connections Reset is the number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state." ::= { tcpV6 5 } tcpV6SegmentsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments Received/sec is the rate at which segments are received, including those received in error. This count includes segments received on currently established connections." ::= { tcpV6 6 } tcpV6SegmentsRetransmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments Retransmitted/sec is the rate at which segments are retransmitted, that is, segments transmitted containing one or more previously transmitted bytes." ::= { tcpV6 7 } tcpV6SegmentsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments Sent/sec is the rate at which segments are sent, including those on current connections, but excluding those containing only retransmitted bytes." ::= { tcpV6 8 } tcpV6SegmentsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Segments/sec is the rate at which TCP segments are sent or received using the TCP protocol." ::= { tcpV6 9 } telephony OBJECT-IDENTITY STATUS current DESCRIPTION "The Telephony performance object provides counters for monitoring telephone-communication activity on a computer running Windows 2000." ::= { advanced 80 } telephonyActiveLines OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of telephone lines serviced by this computer that are currently active." ::= { telephony 1 } telephonyActiveTelephones OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of telephone devices that are currently being monitored." ::= { telephony 2 } telephonyClientApps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of applications that are currently using telephony services." ::= { telephony 3 } telephonyCurrentIncomingCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current incoming calls being serviced by this computer." ::= { telephony 4 } telephonyCurrentOutgoingCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current outgoing calls being serviced by this computer." ::= { telephony 5 } telephonyIncomingCallsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of incoming calls answered by this computer." ::= { telephony 6 } telephonyLines OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of telephone lines serviced by this computer." ::= { telephony 7 } telephonyOutgoingCallsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of outgoing calls made by this computer." ::= { telephony 8 } telephonyTelephoneDevices OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of telephone devices serviced by this computer." ::= { telephony 9 } terminalServices OBJECT-IDENTITY STATUS current DESCRIPTION "Terminal Services summary information." ::= { advanced 81 } tsActiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active Terminal Services sessions." ::= { terminalServices 1 } tsInactiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of inactive Terminal Services sessions." ::= { terminalServices 2 } tsTotalSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Terminal Services sessions." ::= { terminalServices 3 } terminalServicesSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF TerminalServicesSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Terminal Services Session object provides per-session resource statistics such as packet and frame transmission data, errors, and cache activity for Terminal Services." ::= { advanced 82 } terminalServicesSessionEntry OBJECT-TYPE SYNTAX TerminalServicesSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Terminal Services Session' object." INDEX { tssInstance } ::= { terminalServicesSessionTable 1 } TerminalServicesSessionEntry ::= SEQUENCE { tssInstance InstanceName, tssPercentPrivilegedTime Gauge32, tssPercentProcessorTime Gauge32, tssPercentUserTime Gauge32, tssHandleCount Gauge32, tssInputAsyncFrameError Gauge32, tssInputAsyncOverflow Gauge32, tssInputAsyncOverrun Gauge32, tssInputAsyncParityError Gauge32, tssInputBytes Gauge32, tssInputCompressFlushes Gauge32, tssInputCompressedBytes Gauge32, tssInputCompressionRatio Gauge32, tssInputErrors Gauge32, tssInputFrames Gauge32, tssInputTimeouts Gauge32, tssInputTransportErrors Gauge32, tssInputWaitForOutBuf Gauge32, tssInputWdBytes Gauge32, tssInputWdFrames Gauge32, tssOutputAsyncFrameError Gauge32, tssOutputAsyncOverflow Gauge32, tssOutputAsyncOverrun Gauge32, tssOutputAsyncParityError Gauge32, tssOutputBytes Gauge32, tssOutputCompressFlushes Gauge32, tssOutputCompressedBytes Gauge32, tssOutputCompressionRatio Gauge32, tssOutputErrors Gauge32, tssOutputFrames Gauge32, tssOutputTimeouts Gauge32, tssOutputTransportErrors Gauge32, tssOutputWaitForOutBuf Gauge32, tssOutputWdBytes Gauge32, tssOutputWdFrames Gauge32, tssPageFaultsPerSec Gauge32, tssPageFileBytes Gauge32, tssPageFileBytesPeak Gauge32, tssPoolNonpagedBytes Gauge32, tssPoolPagedBytes Gauge32, tssPrivateBytes Gauge32, tssProtocolBitmapCacheHitRatio Gauge32, tssProtocolBitmapCacheHits Gauge32, tssProtocolBitmapCacheReads Gauge32, tssProtocolBrushCacheHitRatio Gauge32, tssProtocolBrushCacheHits Gauge32, tssProtocolBrushCacheReads Gauge32, tssProtocolGlyphCacheHitRatio Gauge32, tssProtocolGlyphCacheHits Gauge32, tssProtocolGlyphCacheReads Gauge32, tssProtocolSvScrnBtmpCachHtRatio Gauge32, tssProtocolSvScrnBtmpCachHts Gauge32, tssProtocolSvScrnBtmpCachReads Gauge32, tssThreadCount Gauge32, tssTotalAsyncFrameError Gauge32, tssTotalAsyncOverflow Gauge32, tssTotalAsyncOverrun Gauge32, tssTotalAsyncParityError Gauge32, tssTotalBytes Gauge32, tssTotalCompressFlushes Gauge32, tssTotalCompressedBytes Gauge32, tssTotalCompressionRatio Gauge32, tssTotalErrors Gauge32, tssTotalFrames Gauge32, tssTotalProtocolCacheHitRatio Gauge32, tssTotalProtocolCacheHits Gauge32, tssTotalProtocolCacheReads Gauge32, tssTotalTimeouts Gauge32, tssTotalTransportErrors Gauge32, tssTotalWaitForOutBuf Gauge32, tssTotalWdBytes Gauge32, tssTotalWdFrames Gauge32, tssVirtualBytes Gauge32, tssVirtualBytesPeak Gauge32, tssWorkingSet Gauge32, tssWorkingSetPeak Gauge32 } tssInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { terminalServicesSessionEntry 1 } tssPercentPrivilegedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service is called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { terminalServicesSessionEntry 2 } tssPercentProcessorTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Processor Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count." ::= { terminalServicesSessionEntry 3 } tssPercentUserTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% User Time is the percentage of elapsed time that the process threads spent executing code in user mode. Applications, environment subsystems, and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows executive, kernel, and device drivers. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { terminalServicesSessionEntry 4 } tssHandleCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of handles currently open by this process. This number is equal to the sum of the handles currently open by each thread in this process." ::= { terminalServicesSessionEntry 5 } tssInputAsyncFrameError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of input async framing errors. These can be caused by a noisy transmission line. Using a smaller packet size may help in some cases." ::= { terminalServicesSessionEntry 6 } tssInputAsyncOverflow OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of input async overflow errors. These can be caused by a lack of buffer space available on the host." ::= { terminalServicesSessionEntry 7 } tssInputAsyncOverrun OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of input async overrun errors. These can be caused by the baud rate being faster than the computer can handle, or a non-16550 serial line is used. Overruns can also occur if too many high speed serial lines are active at one time for the processor's power." ::= { terminalServicesSessionEntry 8 } tssInputAsyncParityError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of input async parity errors. These can be caused by a noisy transmission line" ::= { terminalServicesSessionEntry 9 } tssInputBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes input on this session that includes all protocol overhead." ::= { terminalServicesSessionEntry 10 } tssInputCompressFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of input compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transferring compressed files over Client Drive Mapping." ::= { terminalServicesSessionEntry 11 } tssInputCompressedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes input after compression. This number compared with the Total Bytes input is the compression ratio." ::= { terminalServicesSessionEntry 12 } tssInputCompressionRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Compression ratio of the server input data stream." ::= { terminalServicesSessionEntry 13 } tssInputErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of input errors of all types. Some example input errors are lost ACK's, badly formed packets, etc." ::= { terminalServicesSessionEntry 14 } tssInputFrames OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames (packets) input on this Session." ::= { terminalServicesSessionEntry 15 } tssInputTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of timeouts on the communication line as seen from the client side of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions." ::= { terminalServicesSessionEntry 16 } tssInputTransportErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Terminal Services transport-level errors on input." ::= { terminalServicesSessionEntry 17 } tssInputWaitForOutBuf OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a wait for an available send buffer was done by the protocols on the client side of the connection." ::= { terminalServicesSessionEntry 18 } tssInputWdBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes input on this session after all protocol overhead has been removed." ::= { terminalServicesSessionEntry 19 } tssInputWdFrames OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames input after any additional protocol added frames have been removed." ::= { terminalServicesSessionEntry 20 } tssOutputAsyncFrameError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of output async framing errors. This could be caused by a hardware or line problem." ::= { terminalServicesSessionEntry 21 } tssOutputAsyncOverflow OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of output async overflow errors." ::= { terminalServicesSessionEntry 22 } tssOutputAsyncOverrun OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of output async overrun errors." ::= { terminalServicesSessionEntry 23 } tssOutputAsyncParityError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of output async parity errors. These can be caused by a hardware or line problem." ::= { terminalServicesSessionEntry 24 } tssOutputBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes output on this Session that includes all protocol overhead." ::= { terminalServicesSessionEntry 25 } tssOutputCompressFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of output compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transfering compressed files over Client Drive Mapping." ::= { terminalServicesSessionEntry 26 } tssOutputCompressedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes output after compression. This number compared with the Total Bytes output is the compression ratio." ::= { terminalServicesSessionEntry 27 } tssOutputCompressionRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Compression ratio of the server output data stream." ::= { terminalServicesSessionEntry 28 } tssOutputErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of output errors of all types. Some example output errors are lost ACK's, badly formed packets, etc." ::= { terminalServicesSessionEntry 29 } tssOutputFrames OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames (packets) output on this session." ::= { terminalServicesSessionEntry 30 } tssOutputTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of timeouts on the communication line from the host side of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions." ::= { terminalServicesSessionEntry 31 } tssOutputTransportErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Terminal Services transport-level errors on output." ::= { terminalServicesSessionEntry 32 } tssOutputWaitForOutBuf OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This is the number of times that a wait for an available send buffer was done by the protocol on the server side of the connection." ::= { terminalServicesSessionEntry 33 } tssOutputWdBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes output on this session after all protocol overhead has been removed." ::= { terminalServicesSessionEntry 34 } tssOutputWdFrames OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of frames output before any additional protocol frames have been added." ::= { terminalServicesSessionEntry 35 } tssPageFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page Faults/sec is the rate at which page faults by the threads executing in this process are occurring. A page fault occurs when a thread refers to a virtual memory page that is not in its working set in main memory. This may not cause the page to be fetched from disk if it is on the standby list and hence already in main memory, or if it is in use by another process with whom the page is shared." ::= { terminalServicesSessionEntry 36 } tssPageFileBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File Bytes is the current amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the current amount of virtual memory that the process has reserved for use in physical memory." ::= { terminalServicesSessionEntry 37 } tssPageFileBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Page File Bytes Peak is the maximum amount of virtual memory, in bytes, that this process has reserved for use in the paging file(s). Paging files are used to store pages of memory used by the process that are not contained in other files. Paging files are shared by all processes, and the lack of space in paging files can prevent other processes from allocating memory. If there is no paging file, this counter reflects the maximum amount of virtual memory that the process has reserved for use in physical memory." ::= { terminalServicesSessionEntry 38 } tssPoolNonpagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Nonpaged Bytes is the size, in bytes, of the nonpaged pool, an area of system memory (physical memory used by the operating system) for objects that cannot be written to disk, but must remain in physical memory as long as they are allocated. Memory\\Pool Nonpaged Bytes is calculated differently than Process\\Pool Nonpaged Bytes, so it might not equal Process\\Pool Nonpaged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { terminalServicesSessionEntry 39 } tssPoolPagedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pool Paged Bytes is the size, in bytes, of the paged pool, an area of system memory (physical memory used by the operating system) for objects that can be written to disk when they are not being used. Memory\\Pool Paged Bytes is calculated differently than Process\\Pool Paged Bytes, so it might not equal Process\\Pool Paged Bytes\\_Total. This counter displays the last observed value only; it is not an average." ::= { terminalServicesSessionEntry 40 } tssPrivateBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Private Bytes is the current size, in bytes, of memory that this process has allocated that cannot be shared with other processes." ::= { terminalServicesSessionEntry 41 } tssProtocolBitmapCacheHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hit ratio in the protocol bitmap cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache." ::= { terminalServicesSessionEntry 42 } tssProtocolBitmapCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of hits in the protocol bitmap cache." ::= { terminalServicesSessionEntry 43 } tssProtocolBitmapCacheReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of references to the protocol bitmap cache." ::= { terminalServicesSessionEntry 44 } tssProtocolBrushCacheHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hit ratio in the protocol brush cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache." ::= { terminalServicesSessionEntry 45 } tssProtocolBrushCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of hits in the protocol brush cache." ::= { terminalServicesSessionEntry 46 } tssProtocolBrushCacheReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of references to the protocol brush cache." ::= { terminalServicesSessionEntry 47 } tssProtocolGlyphCacheHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hit ratio in the protocol glyph cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache." ::= { terminalServicesSessionEntry 48 } tssProtocolGlyphCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of hits in the protocol glyph cache." ::= { terminalServicesSessionEntry 49 } tssProtocolGlyphCacheReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of references to the protocol glyph cache." ::= { terminalServicesSessionEntry 50 } tssProtocolSvScrnBtmpCachHtRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Hit ratio in the protocol save screen bitmap cache. A higher hit ratio means better performance since data transmissions are reduced. Low hit ratios are due to the screen updating with new information that is either not re-used, or is flushed out of the client cache." ::= { terminalServicesSessionEntry 51 } tssProtocolSvScrnBtmpCachHts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of hits in the protocol save screen bitmap cache." ::= { terminalServicesSessionEntry 52 } tssProtocolSvScrnBtmpCachReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of references to the protocol save screen bitmap cache." ::= { terminalServicesSessionEntry 53 } tssThreadCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of threads currently active in this process. An instruction is the basic unit of execution in a processor, and a thread is the object that executes instructions. Every running process has at least one thread." ::= { terminalServicesSessionEntry 54 } tssTotalAsyncFrameError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of async framing errors. These can be caused by a noisy transmission line. Using a smaller packet size may help in some cases." ::= { terminalServicesSessionEntry 55 } tssTotalAsyncOverflow OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of async overflow errors. These can be caused by a lack of buffer space available on the host." ::= { terminalServicesSessionEntry 56 } tssTotalAsyncOverrun OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of async overrun errors. These can be caused by the baud rate being faster than the computer can handle, or a non-16550 serial line is used. Overruns can also occur if too many high speed serial lines are active at one time for the processor's power." ::= { terminalServicesSessionEntry 57 } tssTotalAsyncParityError OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of async parity errors. These can be caused by a noisy transmission line." ::= { terminalServicesSessionEntry 58 } tssTotalBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes on this Session that includes all protocol overhead." ::= { terminalServicesSessionEntry 59 } tssTotalCompressFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of compression dictionary flushes. When the data can not be compressed, the compression dictionary is flushed so that newer data has a better chance of being compressed. Some causes of data not compressing includes transfering compressed files over Client Drive Mapping." ::= { terminalServicesSessionEntry 60 } tssTotalCompressedBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes after compression. This number compared with the total bytes is the compression ratio." ::= { terminalServicesSessionEntry 61 } tssTotalCompressionRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total compression ratio of the server data stream." ::= { terminalServicesSessionEntry 62 } tssTotalErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of errors of all types. Some example errors are lost ACK's, badly formed packets, etc." ::= { terminalServicesSessionEntry 63 } tssTotalFrames OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of frames (packets) on this Session." ::= { terminalServicesSessionEntry 64 } tssTotalProtocolCacheHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Overall hit ratio for all protocol caches." ::= { terminalServicesSessionEntry 65 } tssTotalProtocolCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total hits in all protocol caches. The protocol caches Windows objects that are likely to be re-used to avoid having to re-send them on the transmission line. Example objects are Windows icons and brushes. Hits in the cache represent objects that did not need to be re-sent." ::= { terminalServicesSessionEntry 66 } tssTotalProtocolCacheReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total references to all protocol caches." ::= { terminalServicesSessionEntry 67 } tssTotalTimeouts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of timeouts on the communication line from both the host and client sides of the connection. These are typically the result of a noisy line. On some high latency networks, this could be the result of the protocol timeout being too short. Increasing the protocol timeout on these types of lines will improve performance by reducing needless re-transmissions." ::= { terminalServicesSessionEntry 68 } tssTotalTransportErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of Terminal Services transport-level errors." ::= { terminalServicesSessionEntry 69 } tssTotalWaitForOutBuf OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that a wait for an available send buffer was done by the protocols on both the server and client sides of the connection." ::= { terminalServicesSessionEntry 70 } tssTotalWdBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of bytes on this Session after all protocol overhead has been removed." ::= { terminalServicesSessionEntry 71 } tssTotalWdFrames OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames input and output before any additional protocol frames have been added." ::= { terminalServicesSessionEntry 72 } tssVirtualBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual Bytes is the current size, in bytes, of the virtual address space the process is using. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. Virtual space is finite, and the process can limit its ability to load libraries." ::= { terminalServicesSessionEntry 73 } tssVirtualBytesPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Virtual Bytes Peak is the maximum size, in bytes, of virtual address space the process has used at any one time. Use of virtual address space does not necessarily imply corresponding use of either disk or main memory pages. However, virtual space is finite, and the process might limit its ability to load libraries." ::= { terminalServicesSessionEntry 74 } tssWorkingSet OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set is the current size, in bytes, of the Working Set of this process. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before leaving main memory." ::= { terminalServicesSessionEntry 75 } tssWorkingSetPeak OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Working Set Peak is the maximum size, in bytes, of the Working Set of this process at any point in time. The Working Set is the set of memory pages touched recently by the threads in the process. If free memory in the computer is above a threshold, pages are left in the Working Set of a process even if they are not in use. When free memory falls below a threshold, pages are trimmed from Working Sets. If they are needed they will then be soft-faulted back into the Working Set before they leave main memory." ::= { terminalServicesSessionEntry 76 } threadTable OBJECT-TYPE SYNTAX SEQUENCE OF ThreadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Thread performance object consists of counters that measure aspects of thread behavior. A thread is the basic object that executes instructions on a processor. All running processes have at least one thread." ::= { advanced 83 } threadEntry OBJECT-TYPE SYNTAX ThreadEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Thread' object." INDEX { threadInstance } ::= { threadTable 1 } ThreadEntry ::= SEQUENCE { threadInstance InstanceName, threadPercentPrivilegedTime Gauge32, threadPercentProcessorTime Gauge32, threadPercentUserTime Gauge32, threadContextSwitchesPerSec Gauge32, threadElapsedTime Gauge32, threadIDProcess Gauge32, threadIDThread Gauge32, threadPriorityBase Gauge32, threadPriorityCurrent Gauge32, threadStartAddress Gauge32, threadThreadState Gauge32, threadThreadWaitReason Gauge32 } threadInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { threadEntry 1 } threadPercentPrivilegedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Privileged Time is the percentage of elapsed time that the process threads spent executing code in privileged mode. When a Windows system service in called, the service will often run in privileged mode to gain access to system-private data. Such data is protected from access by threads executing in user mode. Calls to the system can be explicit or implicit, such as page faults or interrupts. Unlike some early operating systems, Windows uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. Some work done by Windows on behalf of the application might appear in other subsystem processes in addition to the privileged time in the process." ::= { threadEntry 2 } threadPercentProcessorTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% Processor Time is the percentage of elapsed time that all of process threads used the processor to execution instructions. An instruction is the basic unit of execution in a computer, a thread is the object that executes instructions, and a process is the object created when a program is run. Code executed to handle some hardware interrupts and trap conditions are included in this count." ::= { threadEntry 3 } threadPercentUserTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "% User Time is the percentage of elapsed time that this thread has spent executing code in user mode. Applications, environment subsystems, and integral subsystems execute in user mode. Code executing in user mode cannot damage the integrity of the Windows NT Executive, Kernel, and device drivers. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of your application might appear in other subsystem processes in addition to the privileged time in your process." ::= { threadEntry 4 } threadContextSwitchesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Context Switches/sec is the rate of switches from one thread to another. Thread switches can occur either inside of a single process or across processes. A thread switch can be caused either by one thread asking another for information, or by a thread being preempted by another, higher priority thread becoming ready to run. Unlike some early operating systems, Windows NT uses process boundaries for subsystem protection in addition to the traditional protection of user and privileged modes. These subsystem processes provide additional protection. Therefore, some work done by Windows NT on behalf of an application appear in other subsystem processes in addition to the privileged time in the application. Switching to the subsystem process causes one Context Switch in the application thread. Switching back causes another Context Switch in the subsystem thread." ::= { threadEntry 5 } threadElapsedTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total elapsed time (in seconds) this thread has been running." ::= { threadEntry 6 } threadIDProcess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID Process is the unique identifier of this process. ID Process numbers are reused, so they only identify a process for the lifetime of that process." ::= { threadEntry 7 } threadIDThread OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "ID Thread is the unique identifier of this thread. ID Thread numbers are reused, so they only identify a thread for the lifetime of that thread." ::= { threadEntry 8 } threadPriorityBase OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current base priority of this thread. The system can raise the thread's dynamic priority above the base priority if the thread is handling user input, or lower it towards the base priority if the thread becomes compute bound." ::= { threadEntry 9 } threadPriorityCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current dynamic priority of this thread. The system can raise the thread's dynamic priority above the base priority if the thread is handling user input, or lower it towards the base priority if the thread becomes compute bound." ::= { threadEntry 10 } threadStartAddress OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Starting virtual address for this thread." ::= { threadEntry 11 } threadThreadState OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Thread State is the current state of the thread. It is 0 for Initialized, 1 for Ready, 2 for Running, 3 for Standby, 4 for Terminated, 5 for Wait, 6 for Transition, 7 for Unknown. A Running thread is using a processor; a Standby thread is about to use one. A Ready thread wants to use a processor, but is waiting for a processor because none are free. A thread in Transition is waiting for a resource in order to execute, such as waiting for its execution stack to be paged in from disk. A Waiting thread has no use for the processor because it is waiting for a peripheral operation to complete or a resource to become free." ::= { threadEntry 12 } threadThreadWaitReason OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Thread Wait Reason is only applicable when the thread is in the Wait state (see Thread State). It is 0 or 7 when the thread is waiting for the Executive, 1 or 8 for a Free Page, 2 or 9 for a Page In, 3 or 10 for a Pool Allocation, 4 or 11 for an Execution Delay, 5 or 12 for a Suspended condition, 6 or 13 for a User Request, 14 for an Event Pair High, 15 for an Event Pair Low, 16 for an LPC Receive, 17 for an LPC Reply, 18 for Virtual Memory, 19 for a Page Out; 20 and higher are not assigned at the time of this writing. Event Pairs are used to communicate with protected subsystems (see Context Switches)." ::= { threadEntry 13 } udpV4 OBJECT-IDENTITY STATUS current DESCRIPTION "The UDP performance object consists of counters that measure the rates at which User Data Protocol (UDP) datagrams are sent and received using the UDP. It includes counters that monitor UDP errors." ::= { advanced 84 } udpV4DatagramsNoPortPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams No Port/sec is the rate of received UDP datagrams for which there was no application at the destination port." ::= { udpV4 1 } udpV4DatagramsReceivedErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Errors is the number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port." ::= { udpV4 2 } udpV4DatagramsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate at which UDP datagrams are delivered to UDP users." ::= { udpV4 3 } udpV4DatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate at which UDP datagrams are sent from the entity." ::= { udpV4 4 } udpV4DatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate at which UDP datagrams are sent or received by the entity." ::= { udpV4 5 } udpV6 OBJECT IDENTIFIER ::= { advanced 85 } udpV6DatagramsNoPortPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams No Port/sec is the rate of received UDP datagrams for which there was no application at the destination port." ::= { udpV6 1 } udpV6DatagramsReceivedErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received Errors is the number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port." ::= { udpV6 2 } udpV6DatagramsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Received/sec is the rate at which UDP datagrams are delivered to UDP users." ::= { udpV6 3 } udpV6DatagramsSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams Sent/sec is the rate at which UDP datagrams are sent from the entity." ::= { udpV6 4 } udpV6DatagramsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Datagrams/sec is the rate at which UDP datagrams are sent or received by the entity." ::= { udpV6 5 } webServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF WebServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Web Service object counters installed with Internet Information Service monitor file transfer rates, bandwidth usage, and connection rates. You can view performance data for all instances of this object (using the _Total instance) or for specific instances, such as the Default Web Site or Administration Web Site instances. In addition to these counters, counters supplied by the Internet Information Services Global performance object combine data for the Web service with the performance data they report for IIS as a whole. For more information, see the Internet Information Services Global object." ::= { advanced 86 } webServiceEntry OBJECT-TYPE SYNTAX WebServiceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Web Service' object." INDEX { wsInstance } ::= { webServiceTable 1 } WebServiceEntry ::= SEQUENCE { wsInstance InstanceName, wsAnonymousUsersPerSec Gauge32, wsBytesReceivedPerSec Gauge32, wsBytesSentPerSec Gauge32, wsBytesTotalPerSec Gauge32, wsCGIRqstsPerSec Gauge32, wsConnAtmpsPerSec Gauge32, wsCopyRqstsPerSec Gauge32, wsCurrentAnonymousUsers Gauge32, wsCurrentBlkdAsyncIORqsts Gauge32, wsCurrentCALCountForSSLConns Gauge32, wsCurrentCALCountForAuthdUsers Gauge32, wsCurrentCGIRqsts Gauge32, wsCurrentConns Gauge32, wsCurrentISAPIExtensionRqsts Gauge32, wsCurrentNonAnonymousUsers Gauge32, wsCurrentBlkdBandwidthBytes Gauge32, wsDeleteRqstsPerSec Gauge32, wsFilesReceivedPerSec Gauge32, wsFilesSentPerSec Gauge32, wsFilesPerSec Gauge32, wsGetRqstsPerSec Gauge32, wsHeadRqstsPerSec Gauge32, wsISAPIExtensionRqstsPerSec Gauge32, wsLockRqstsPerSec Gauge32, wsLockedErrorsPerSec Gauge32, wsLogonAtmpsPerSec Gauge32, wsMaximumAnonymousUsers Gauge32, wsMaximumCALCountForSSLConns Gauge32, wsMaximumCALCountForAuthdUsers Gauge32, wsMaximumCGIRqsts Gauge32, wsMaximumConns Gauge32, wsMaximumISAPIExtensionRqsts Gauge32, wsMaximumNonAnonymousUsers Gauge32, wsMeasuredAsyncIOBandwidthUsage Gauge32, wsMkcolRqstsPerSec Gauge32, wsMoveRqstsPerSec Gauge32, wsNonAnonymousUsersPerSec Gauge32, wsNotFoundErrorsPerSec Gauge32, wsOptionsRqstsPerSec Gauge32, wsOtherRqstMethodsPerSec Gauge32, wsPostRqstsPerSec Gauge32, wsPropfindRqstsPerSec Gauge32, wsProppatchRqstsPerSec Gauge32, wsPutRqstsPerSec Gauge32, wsSearchRqstsPerSec Gauge32, wsServiceUptime Gauge32, wsTotalAllowedAsyncIORqsts Gauge32, wsTotalAnonymousUsers Gauge32, wsTotalBlkdAsyncIORqsts Gauge32, wsTotalBytesReceived Gauge32, wsTotalBytesSent Gauge32, wsTotalBytesTransfered Gauge32, wsTotalCGIRqsts Gauge32, wsTotalConnAtmpsAllInstances Gauge32, wsTotalCopyRqsts Gauge32, wsTotalDeleteRqsts Gauge32, wsTotalFilesReceived Gauge32, wsTotalFilesSent Gauge32, wsTotalFilesTransferred Gauge32, wsTotalGetRqsts Gauge32, wsTotalHeadRqsts Gauge32, wsTotalISAPIExtensionRqsts Gauge32, wsTotalLockRqsts Gauge32, wsTotalLockedErrors Gauge32, wsTotalLogonAtmps Gauge32, wsTotalMethodRqsts Gauge32, wsTotalMethodRqstsPerSec Gauge32, wsTotalMkcolRqsts Gauge32, wsTotalMoveRqsts Gauge32, wsTotalNonAnonymousUsers Gauge32, wsTotalNotFoundErrors Gauge32, wsTotalOptionsRqsts Gauge32, wsTotalOtherRqstMethods Gauge32, wsTotalPostRqsts Gauge32, wsTotalPropfindRqsts Gauge32, wsTotalProppatchRqsts Gauge32, wsTotalPutRqsts Gauge32, wsTotalRejectedAsyncIORqsts Gauge32, wsTotalSearchRqsts Gauge32, wsTotalTraceRqsts Gauge32, wsTotalUnlockRqsts Gauge32, wsTotalBlkdBandwidthBytes Gauge32, wsTotalCountFailCALRqstsSSLConns Gauge32, wsTotalCountFailCALRqstsAuthdUsr Gauge32, wsTraceRqstsPerSec Gauge32, wsUnlockRqstsPerSec Gauge32 } wsInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { webServiceEntry 1 } wsAnonymousUsersPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate users are making anonymous connections to the Web service." ::= { webServiceEntry 2 } wsBytesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Received/sec is the rate that data bytes are received by the Web service." ::= { webServiceEntry 3 } wsBytesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Sent/sec is the rate data bytes are being sent by the Web service." ::= { webServiceEntry 4 } wsBytesTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes Total/sec is the sum of Bytes Sent/sec and Bytes Received/sec. This is the total rate of bytes transferred by the Web service." ::= { webServiceEntry 5 } wsCGIRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate CGI requests are received by the Web service." ::= { webServiceEntry 6 } wsConnAtmpsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that connections to the Web service are being attempted." ::= { webServiceEntry 7 } wsCopyRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the COPY method are made. Copy requests are used for copying files and directories." ::= { webServiceEntry 8 } wsCurrentAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Anonymous Users is the number of users who currently have an anonymous connection using the Web service." ::= { webServiceEntry 9 } wsCurrentBlkdAsyncIORqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current requests temporarily blocked due to bandwidth throttling settings." ::= { webServiceEntry 10 } wsCurrentCALCountForSSLConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is no longer valid. Value will always be zero." ::= { webServiceEntry 11 } wsCurrentCALCountForAuthdUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is no longer valid. Value will always be zero." ::= { webServiceEntry 12 } wsCurrentCGIRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current CGI Requests is the current number of CGI requests being simultaneously processed by the Web service." ::= { webServiceEntry 13 } wsCurrentConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connections is the current number of connections established with the Web service." ::= { webServiceEntry 14 } wsCurrentISAPIExtensionRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current ISAPI Extension Requests is the current number of ISAPI requests being simultaneously processed by the Web service." ::= { webServiceEntry 15 } wsCurrentNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current NonAnonymous Users is the number of users who currently have a non-anonymous connection using the Web service." ::= { webServiceEntry 16 } wsCurrentBlkdBandwidthBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current bytes temporarily blocked due to bandwidth throttling settings." ::= { webServiceEntry 17 } wsDeleteRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the DELETE method are made. Delete requests are generally used for file removals." ::= { webServiceEntry 18 } wsFilesReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate files are received by the Web service." ::= { webServiceEntry 19 } wsFilesSentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate files are sent by the Web service." ::= { webServiceEntry 20 } wsFilesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate files are transferred, that is, sent and received by the Web service." ::= { webServiceEntry 21 } wsGetRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the GET method are made. Get requests are the most common HTTP request." ::= { webServiceEntry 22 } wsHeadRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the HEAD method are made. Head requests generally indicate a client is querying the state of a document they already have to see if it needs to be refreshed." ::= { webServiceEntry 23 } wsISAPIExtensionRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that ISAPI Extension requests are received by the Web service." ::= { webServiceEntry 24 } wsLockRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the LOCK method are made. Lock requests are used to lock a file for one user so that only that user can modify the file." ::= { webServiceEntry 25 } wsLockedErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of errors due to requests that couldn't be satisfied by the server because the requested document was locked. These are generally reported as an HTTP 423 error code to the client." ::= { webServiceEntry 26 } wsLogonAtmpsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate that logons to the Web service are being attempted." ::= { webServiceEntry 27 } wsMaximumAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Anonymous Users is the maximum number of users who established concurrent anonymous connections using the Web service (since service startup)." ::= { webServiceEntry 28 } wsMaximumCALCountForSSLConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is no longer valid. Value will always be zero." ::= { webServiceEntry 29 } wsMaximumCALCountForAuthdUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is no longer valid. Value will always be zero." ::= { webServiceEntry 30 } wsMaximumCGIRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum CGI Requests is the maximum number of CGI requests simultaneously processed by the Web service (since service startup)." ::= { webServiceEntry 31 } wsMaximumConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum Connections is the maximum number of concurrent connections established with the Web service (since service startup)." ::= { webServiceEntry 32 } wsMaximumISAPIExtensionRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum ISAPI Extension Requests is the maximum number of ISAPI requests simultaneously processed by the Web service (since service startup)." ::= { webServiceEntry 33 } wsMaximumNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum NonAnonymous Users is the maximum number of concurrent non-anonymous connections to the Web service (since service startup)." ::= { webServiceEntry 34 } wsMeasuredAsyncIOBandwidthUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Measured bandwidth of asynchronous I/O averaged over a minute." ::= { webServiceEntry 35 } wsMkcolRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the MKCOL method are made. Mkcol requests are used to create directories on the server." ::= { webServiceEntry 36 } wsMoveRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the MOVE method are made. Move requests are used for moving files and directories." ::= { webServiceEntry 37 } wsNonAnonymousUsersPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate users are making non-anonymous connections to the Web service." ::= { webServiceEntry 38 } wsNotFoundErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of errors due to requests that couldn't be satisfied by the server because the requested document could not be found. These are generally reported as an HTTP 404 error code to the client." ::= { webServiceEntry 39 } wsOptionsRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the OPTIONS method are made." ::= { webServiceEntry 40 } wsOtherRqstMethodsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests are made that do not use the OPTIONS, GET, HEAD, POST, PUT, DELETE, TRACE, MOVE, COPY, MKCOL, PROPFIND, PROPPATCH, SEARCH, LOCK or UNLOCK methods." ::= { webServiceEntry 41 } wsPostRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the POST method are made." ::= { webServiceEntry 42 } wsPropfindRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the PROPFIND method are made. Propfind requests retrieve property values on files and directories." ::= { webServiceEntry 43 } wsProppatchRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the PROPPATCH method are made. Proppatch requests set property values on files and directories." ::= { webServiceEntry 44 } wsPutRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the PUT method are made." ::= { webServiceEntry 45 } wsSearchRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the SEARCH method are made. Search requests are used to query the server to find resources that match a set of conditions provided by the client." ::= { webServiceEntry 46 } wsServiceUptime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of time the Web Service has been running." ::= { webServiceEntry 47 } wsTotalAllowedAsyncIORqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total requests allowed by bandwidth throttling settings (since service startup)." ::= { webServiceEntry 48 } wsTotalAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Anonymous Users is the total number of users who established an anonymous connection with the Web service (since service startup)." ::= { webServiceEntry 49 } wsTotalBlkdAsyncIORqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total requests temporarily blocked due to bandwidth throttling settings (since service startup)." ::= { webServiceEntry 50 } wsTotalBytesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Bytes Received is the number of data bytes that have been received by the Web service (since service startup)." ::= { webServiceEntry 51 } wsTotalBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Bytes Sent is the number of data bytes that have been sent by the Web service (since service startup)." ::= { webServiceEntry 52 } wsTotalBytesTransfered OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total bytes either received or sent by the Web service (since service startup)." ::= { webServiceEntry 53 } wsTotalCGIRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total CGI requests is the total number of CGI requests (since service startup)." ::= { webServiceEntry 54 } wsTotalConnAtmpsAllInstances OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Connection Attempts is the number of connections that have been attempted using the Web service (since service startup). This counter is for all instances listed." ::= { webServiceEntry 55 } wsTotalCopyRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Copy Requests is the number of HTTP requests using the COPY method (since service startup). Copy requests are used for copying files and directories." ::= { webServiceEntry 56 } wsTotalDeleteRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Delete Requests is the number of HTTP requests using the DELETE method (since service startup). Delete requests are generally used for file removals." ::= { webServiceEntry 57 } wsTotalFilesReceived OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Files Received is the total number of files received by the Web service (since service startup)." ::= { webServiceEntry 58 } wsTotalFilesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Files Sent is the total number of files sent by the Web service (since service startup)." ::= { webServiceEntry 59 } wsTotalFilesTransferred OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Files Transferred is the sum of Files Sent and Files Received (since service startup)." ::= { webServiceEntry 60 } wsTotalGetRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Get Requests is the number of HTTP requests using the GET method (since service startup). Get requests are the most common HTTP request." ::= { webServiceEntry 61 } wsTotalHeadRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Head Requests is the number of HTTP requests using the HEAD method (since service startup). Head requests generally indicate a client is querying the state of a document they already have to see if it needs to be refreshed." ::= { webServiceEntry 62 } wsTotalISAPIExtensionRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total ISAPI Extension Requests received (since service startup)." ::= { webServiceEntry 63 } wsTotalLockRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Lock Requests is the number of HTTP requests using the LOCK method (since service startup). Lock requests are used to lock a file for one user so that only that user can modify the file." ::= { webServiceEntry 64 } wsTotalLockedErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Locked Errors is the number of requests that couldn't be satisfied by the server because the requested was locked (since service startup). These are generally reported as an HTTP 423 error code to the client." ::= { webServiceEntry 65 } wsTotalLogonAtmps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Logon Attempts is the number of logons attempts to the Web Service (since service startup)." ::= { webServiceEntry 66 } wsTotalMethodRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Method Requests is the number of all HTTP requests (since service startup)." ::= { webServiceEntry 67 } wsTotalMethodRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests are received." ::= { webServiceEntry 68 } wsTotalMkcolRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Mkcol Requests is the number of HTTP requests using the MKCOL method (since service startup). Mkcol requests are used to create directories on the server." ::= { webServiceEntry 69 } wsTotalMoveRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Move Requests is the number of HTTP requests using the MOVE method (since service startup). Move requests are used for moving files and directories." ::= { webServiceEntry 70 } wsTotalNonAnonymousUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total NonAnonymous Users is the total number of users who established a non-anonymous connection with the Web service (since service startup)." ::= { webServiceEntry 71 } wsTotalNotFoundErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Not Found Errors is the number of requests that couldn't be satisfied by the server because the requested document could not be found (since service startup). These are generally reported as an HTTP 404 error code to the client." ::= { webServiceEntry 72 } wsTotalOptionsRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Options Requests is the number of HTTP requests using the OPTIONS method (since service startup)." ::= { webServiceEntry 73 } wsTotalOtherRqstMethods OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Other Request Methods is the number of HTTP requests that are not OPTIONS, GET, HEAD, POST, PUT, DELETE, TRACE, MOVE, COPY, MKCOL, PROPFIND, PROPPATCH, SEARCH, LOCK or UNLOCK methods (since service startup)." ::= { webServiceEntry 74 } wsTotalPostRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Post Requests is the number of HTTP requests using the POST method (since service startup)." ::= { webServiceEntry 75 } wsTotalPropfindRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Propfind Requests is the number of HTTP requests using the PROPFIND method (since service startup). Propfind requests retrieve property values on files and directories." ::= { webServiceEntry 76 } wsTotalProppatchRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Proppatch Requests is the number of HTTP requests using the PROPPATCH method (since service startup). Proppatch requests set property values on files and directories." ::= { webServiceEntry 77 } wsTotalPutRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Put Requests is the number of HTTP requests using the PUT method (since service startup)." ::= { webServiceEntry 78 } wsTotalRejectedAsyncIORqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total requests rejected due to bandwidth throttling settings (since service startup)." ::= { webServiceEntry 79 } wsTotalSearchRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Search Requests is the number of HTTP requests using the SEARCH method (since service startup). Search requests are used to query the server to find resources that match a set of conditions provided by the client." ::= { webServiceEntry 80 } wsTotalTraceRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Trace Requests is the number of HTTP requests using the TRACE method (since service startup). Trace requests allow the client to see what is being received at the end of the request chain and use the information for diagnostic purposes." ::= { webServiceEntry 81 } wsTotalUnlockRqsts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Unlock Requests is the number of HTTP requests using the UNLOCK method (since service startup). Unlock requests are used to remove locks from files." ::= { webServiceEntry 82 } wsTotalBlkdBandwidthBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total bytes blocked due to bandwidth throttling settings (since service startup)." ::= { webServiceEntry 83 } wsTotalCountFailCALRqstsSSLConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is no longer valid. Value will always be zero." ::= { webServiceEntry 84 } wsTotalCountFailCALRqstsAuthdUsr OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter is no longer valid. Value will always be zero." ::= { webServiceEntry 85 } wsTraceRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the TRACE method are made. Trace requests allow the client to see what is being received at the end of the request chain and use the information for diagnostic purposes." ::= { webServiceEntry 86 } wsUnlockRqstsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate HTTP requests using the UNLOCK method are made. Unlock requests are used to remove locks from files." ::= { webServiceEntry 87 } webServiceCache OBJECT-IDENTITY STATUS current DESCRIPTION "The Web Service Cache Counters object includes cache counters specific to the World Wide Web Publishing Service." ::= { advanced 87 } wscActiveFlushedEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Flushed Entries are file handles cached in user-mode that will be closed when all current transfers complete." ::= { webServiceCache 1 } wscCurrentFileCacheMemoryUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of bytes used for the user-mode file cache." ::= { webServiceCache 2 } wscCurrentFilesCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of files whose content is in the user-mode cache." ::= { webServiceCache 3 } wscCurrentMetadataCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of metadata information blocks currently in the user-mode cache." ::= { webServiceCache 4 } wscCurrentURIsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "URI information blocks currently in the user-mode cache." ::= { webServiceCache 5 } wscFileCacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of files removed from the user-mode cache (since service startup)." ::= { webServiceCache 6 } wscFileCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the user-mode file cache (since service startup)." ::= { webServiceCache 7 } wscFileCacheHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of user-mode file cache hits to total cache requests (since service startup)." ::= { webServiceCache 8 } wscFileCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the user-mode file cache (since service startup)." ::= { webServiceCache 9 } wscKernelCurrentURIsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "URI information blocks currently cached by the kernel." ::= { webServiceCache 10 } wscKernelTotalFlushedURIs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of URI information blocks that have been removed from the kernel cache (since service startup)." ::= { webServiceCache 11 } wscKernelTotalURIsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of URI information blocks added to the kernel cache (since service startup)." ::= { webServiceCache 12 } wscKernelURICacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Kernel URI Cache Flushes (since server startup)." ::= { webServiceCache 13 } wscKernelURICacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the kernel URI cache (since service startup)." ::= { webServiceCache 14 } wscKernelURICacheHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of kernel URI cache hits to total cache requests (since service startup)." ::= { webServiceCache 15 } wscKernelURICacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the kernel URI cache (since service startup)." ::= { webServiceCache 16 } wscKernelUriCacheHitsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of kernel URI Cache hits." ::= { webServiceCache 17 } wscMaximumFileCacheMemoryUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of bytes used for user-mode file cache (since service startup)." ::= { webServiceCache 18 } wscMetadataCacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user-mode metadata cache flushes (since service startup)." ::= { webServiceCache 19 } wscMetadataCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the user-mode metadata cache (since service startup)." ::= { webServiceCache 20 } wscMetadataCacheHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of user-mode metadata cache hits to total cache requests (since service startup)." ::= { webServiceCache 21 } wscMetadataCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the user-mode metadata cache (since service startup)." ::= { webServiceCache 22 } wscTotalFilesCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of files whose content was ever added to the user-mode cache (since service startup)." ::= { webServiceCache 23 } wscTotalFlushedFiles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Flushed Files is the number of file handles that have been removed from the user-mode cache (since service startup)." ::= { webServiceCache 24 } wscTotalFlushedMetadata OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Flushed Metadata is the number of Metadata information blocks that have been removed from the user-mode cache (since service startup)." ::= { webServiceCache 25 } wscTotalFlushedURIs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of URI information blocks that have been removed from the user-mode cache (since service startup)." ::= { webServiceCache 26 } wscTotalMetadataCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of metadata information blocks added to the user-mode cache (since service startup)." ::= { webServiceCache 27 } wscTotalURIsCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of URI information blocks added to the user-mode cache (since service startup)." ::= { webServiceCache 28 } wscURICacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "User-mode URI Cache flushes (since service startup)." ::= { webServiceCache 29 } wscURICacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the user-mode URI cache (since service startup)." ::= { webServiceCache 30 } wscURICacheHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ratio of user-mode URI Cache Hits to total cache requests (since service startup)." ::= { webServiceCache 31 } wscURICacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the user-mode URI cache (since service startup)." ::= { webServiceCache 32 } wscOutputCacheCurrentFlushedItem OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of items that have been flushed, but are still being used by outgoing responses so are still taking up memory." ::= { webServiceCache 33 } wscOutputCacheCurrentHitsPercent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Output Cache current hit ratio. Calculated as (H)/(H+M) where H and M represent Hits and Misses in previous sample interval respectively." ::= { webServiceCache 34 } wscOutputCacheCurrentItems OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of items currently in output cache." ::= { webServiceCache 35 } wscOutputCacheCurrentMemoryUsage OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current memory usage by output cache." ::= { webServiceCache 36 } wscOutputCacheTotalFlushedItems OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of items flushed by cache." ::= { webServiceCache 37 } wscOutputCacheTotalFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of flushes in output cache." ::= { webServiceCache 38 } wscOutputCacheTotalHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hits in output cache." ::= { webServiceCache 39 } wscOutputCacheTotalMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of misses in output cache." ::= { webServiceCache 40 } windowsMediaServices OBJECT IDENTIFIER ::= { advanced 88 } wmsCurCacheDownloads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Cache Downloads is the current number of active downloads to a cache." ::= { windowsMediaServices 1 } wmsCurConnectedPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connected Players is the current number of players with unicast connections to the server." ::= { windowsMediaServices 2 } wmsCurConnectionQueueLength OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connection Queue Length is the current number of connection requests that are pending on the server." ::= { windowsMediaServices 3 } wmsCurConnectionRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connection Rate is the current number of clients per second that are connecting to the server." ::= { windowsMediaServices 4 } wmsCurFileReadRateKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current File Read Rate is the current read rate, in Kbps, for all data files." ::= { windowsMediaServices 5 } wmsCurIncomingBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Incoming Bandwidth is the current bandwidth, in Kbps, allocated for streams from other servers." ::= { windowsMediaServices 6 } wmsCurLateReadRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Late Read Rate is the current number of late read operations per second." ::= { windowsMediaServices 7 } wmsCurLateSendRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Late Send Rate is the current number of late write operations per second." ::= { windowsMediaServices 8 } wmsCurOutDistAllocBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Outgoing Distribution Allocated Bandwidth is the current bandwidth, in Kbps, allocated for streams to distribution servers." ::= { windowsMediaServices 9 } wmsCurOutDistConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Outgoing Distribution Connections is the current number of connections to distribution servers." ::= { windowsMediaServices 10 } wmsCurOutDistSendRateKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Outgoing Distribution Send Rate is the current send rate, in Kbps, for connections to distribution servers." ::= { windowsMediaServices 11 } wmsCurPlayerAllocBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Player Allocated Bandwidth is the current bandwidth, in Kbps, that is allocated for streams to all players." ::= { windowsMediaServices 12 } wmsCurPlayerSendRateKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Player Send Rate is the current rate, in Kbps, at which data is being streamed to players." ::= { windowsMediaServices 13 } wmsCurStreamErrorRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Stream Error Rate is the current number of errors per second due to dropped packets." ::= { windowsMediaServices 14 } wmsCurStreamingHTTPPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming HTTP Players is the current number of players being streamed data using the HTTP protocol. This does not include players that are stopped or paused." ::= { windowsMediaServices 15 } wmsCurStreamingMMSPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming MMS Players is the current number of players being streamed data using the MMS protocol. This does not include players that are stopped or paused." ::= { windowsMediaServices 16 } wmsCurStreamingPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming Players is the current number of players being streamed data across all protocols. This does not include players that are stopped or paused." ::= { windowsMediaServices 17 } wmsCurStreamingRTSPPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming RTSP Players is the current number of players that are being streamed data using the RTSP protocol. This does not include players that are stopped or paused." ::= { windowsMediaServices 18 } wmsCurUDPResendRequestsRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current UDP Resend Requests Rate is the current number of requests for UDP resends per second received from clients." ::= { windowsMediaServices 19 } wmsCurUDPResendsSentRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current UDP Resends Sent Rate is the current number of UDP resends per second sent to clients." ::= { windowsMediaServices 20 } wmsPeakConnectedPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Connected Players is the peak number of players that have connected since the last time the counter was reset." ::= { windowsMediaServices 21 } wmsPeakOutDistAllocBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Outgoing Distribution Allocated Bandwidth is the peak bandwidth, in Kbps, allocated for all streams to distribution servers that have connected since the last time the counter was reset." ::= { windowsMediaServices 22 } wmsPeakOutDistConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Outgoing Distribution Connections is the peak number of distribution servers that have connected since the last time the counter was reset." ::= { windowsMediaServices 23 } wmsPeakOutDistSendRateKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Outgoing Distribution Send Rate is the peak rate, in Kbps, at which data was streamed to distribution servers since the last time the counter was reset." ::= { windowsMediaServices 24 } wmsPeakPlayerAllocBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Player Allocated Bandwidth is the peak bandwidth, in Kbps, that was allocated for all streams to players since the last time the counter was reset." ::= { windowsMediaServices 25 } wmsPeakPlayerSendRateKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Player Send Rate is the peak rate, in Kbps, at which data was streamed to players since the last time the counter was reset." ::= { windowsMediaServices 26 } wmsPeakStreamingPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Streaming Players is the peak number of players that have been streamed data since the last time the counter was reset." ::= { windowsMediaServices 27 } wmsTotalAdvertisements OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Advertisements is the total number of advertisements that have been streamed from playlists since the last time the counter was reset." ::= { windowsMediaServices 28 } wmsTotalConnectedPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Connected Players is the total number of players that have connected since the last time the counter was reset." ::= { windowsMediaServices 29 } wmsTotalLateReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Late Reads is the total number of late read operations since the last time the counter was reset." ::= { windowsMediaServices 30 } wmsTotalLateSends OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Late Sends is the total number of late send operations since the last time the counter was reset." ::= { windowsMediaServices 31 } wmsTotalOutDistBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Outgoing Distribution Bytes Sent is the total number of bytes streamed to all distribution servers since the last time the counter was reset." ::= { windowsMediaServices 32 } wmsTotalOutDistConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Outgoing Distribution Connections is the total number of distribution servers that have connected since the last time the counter was reset." ::= { windowsMediaServices 33 } wmsTotalPlayerBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Player Bytes Sent is the total number of bytes streamed to all players since the last time the counter was reset." ::= { windowsMediaServices 34 } wmsTotalServerUptime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Server Uptime is the elapsed time, in seconds, which the Windows Media Services service has been running since it was last started." ::= { windowsMediaServices 35 } wmsTotalStreamDenials OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Stream Denials is the total number of stream denials since the last time the counter was reset. This includes both denials that occurred due to failure to be authorized or authenticated, as well as denials that occurred because limits were exceeded." ::= { windowsMediaServices 36 } wmsTotalStreamErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Stream Errors is the total number of stream errors due to dropped packets since the last time the counter was reset." ::= { windowsMediaServices 37 } wmsTotalStreamTerminations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Stream Terminations is the total number of streams that were terminated due to inactivity or errors since the last time the counter was reset. This includes terminations that occurred because player inactivity and timeout limits were exceeded, as well as terminations that were due to events such as late reads." ::= { windowsMediaServices 38 } wmsTotalStreamingPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Streaming Players is the total number of players that have been streamed data since the last time the counter was reset." ::= { windowsMediaServices 39 } wmsTotalUDPResendRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total UDP Resend Requests is the total number of requests for UDP resends received from clients since the last time the counter was reset." ::= { windowsMediaServices 40 } wmsTotalUDPResendsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total UDP Resends Sent is the total number of UDP resends sent to clients since the last time the counter was reset." ::= { windowsMediaServices 41 } windowsMediaPublishingPointTable OBJECT-TYPE SYNTAX SEQUENCE OF WindowsMediaPublishingPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'Windows Media Publishing Points' objects." ::= { advanced 89 } windowsMediaPublishingPointEntry OBJECT-TYPE SYNTAX WindowsMediaPublishingPointEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Windows Media Publishing Points' object." INDEX { wmppInstance } ::= { windowsMediaPublishingPointTable 1 } WindowsMediaPublishingPointEntry ::= SEQUENCE { wmppInstance InstanceName, wmppCurConnectedPlayers Gauge32, wmppCurFileReadRateKbps Gauge32, wmppCurLateReadRate Gauge32, wmppCurOutDistAllocBandwidthKbps Gauge32, wmppCurOutDistConnections Gauge32, wmppCurPlayerAllocBandwidthKbps Gauge32, wmppCurStreamErrorRate Gauge32, wmppCurStreamingHTTPPlayers Gauge32, wmppCurStreamingMMSPlayers Gauge32, wmppCurStreamingPlayers Gauge32, wmppCurStreamingRTSPPlayers Gauge32, wmppPeakConnectedPlayers Gauge32, wmppPeakOutDistAllocBandwdthKbps Gauge32, wmppPeakOutDistConnections Gauge32, wmppPeakPlayerAllocBandwidthKbps Gauge32, wmppPeakStreamingPlayers Gauge32, wmppTotalAdvertisements Gauge32, wmppTotalConnectedPlayers Gauge32, wmppTotalFileBytesRead Gauge32, wmppTotalLateReads Gauge32, wmppTotalOutDistBytesSent Gauge32, wmppTotalOutDistConnections Gauge32, wmppTotalPlayerBytesSent Gauge32, wmppTotalStreamDenials Gauge32, wmppTotalStreamErrors Gauge32, wmppTotalStreamTerminations Gauge32, wmppTotalStreamingPlayers Gauge32 } wmppInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { windowsMediaPublishingPointEntry 1 } wmppCurConnectedPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Connected Players is the current number of players with unicast connections to the publishing point." ::= { windowsMediaPublishingPointEntry 2 } wmppCurFileReadRateKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current File Read Rate is the current read rate, in Kbps, for all data files." ::= { windowsMediaPublishingPointEntry 3 } wmppCurLateReadRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Late Read Rate is the current number of late read operations per second." ::= { windowsMediaPublishingPointEntry 4 } wmppCurOutDistAllocBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Outgoing Distribution Allocated Bandwidth is the current bandwidth, in Kbps, allocated for streams to all distribution servers." ::= { windowsMediaPublishingPointEntry 5 } wmppCurOutDistConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Outgoing Distribution Connections is the current number of connections to distribution servers." ::= { windowsMediaPublishingPointEntry 6 } wmppCurPlayerAllocBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Player Allocated Bandwidth is the current bandwidth, in Kbps, that is allocated for streams to all players." ::= { windowsMediaPublishingPointEntry 7 } wmppCurStreamErrorRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Stream Error Rate is the current number of errors per second due to dropped packets." ::= { windowsMediaPublishingPointEntry 8 } wmppCurStreamingHTTPPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming HTTP Players is the current number of players being streamed data using the HTTP protocol. This does not include players that are stopped or paused." ::= { windowsMediaPublishingPointEntry 9 } wmppCurStreamingMMSPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming MMS Players is the current number of players being streamed data using the MMS protocol. This does not include players that are stopped or paused." ::= { windowsMediaPublishingPointEntry 10 } wmppCurStreamingPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming Players is the current number of players being streamed data across all protocols. This does not include players that are stopped or paused." ::= { windowsMediaPublishingPointEntry 11 } wmppCurStreamingRTSPPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current Streaming RTSP Players is the current number of players being streamed data using the RTSP protocol. This does not include players that are stopped or paused." ::= { windowsMediaPublishingPointEntry 12 } wmppPeakConnectedPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Connected Players is the peak number of players that have connected since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 13 } wmppPeakOutDistAllocBandwdthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Outgoing Distribution Allocated Bandwidth is the peak bandwidth, in Kbps, allocated for all streams to distribution servers that have connected since the last time the server was reset." ::= { windowsMediaPublishingPointEntry 14 } wmppPeakOutDistConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Outgoing Distribution Connections is the peak number of distribution servers that have connected since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 15 } wmppPeakPlayerAllocBandwidthKbps OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Player Allocated Bandwidth is the peak bandwidth, in Kbps, that was allocated for streams to players since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 16 } wmppPeakStreamingPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Peak Streaming Players is the peak number of players that have been streamed data since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 17 } wmppTotalAdvertisements OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Advertisements is the total number of advertisements that have been streamed from playlists since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 18 } wmppTotalConnectedPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Connected Players is the total number of players that have connected since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 19 } wmppTotalFileBytesRead OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total File Bytes Read is the total number of file bytes read." ::= { windowsMediaPublishingPointEntry 20 } wmppTotalLateReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Late Reads is the total number of late read operations since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 21 } wmppTotalOutDistBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Outgoing Distribution Bytes Sent is the total number of bytes streamed to all distribution servers since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 22 } wmppTotalOutDistConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Outgoing Distribution Connections is the total number of distribution servers that have connected since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 23 } wmppTotalPlayerBytesSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Player Bytes Sent is the total number of bytes streamed to all players since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 24 } wmppTotalStreamDenials OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Stream Denials is the total number of stream denials since the last time the counter was reset. This includes both denials that occurred due to failure to be authorized or authenticated, as well as denials that occurred because limits were exceeded." ::= { windowsMediaPublishingPointEntry 25 } wmppTotalStreamErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Stream Errors is the total number of stream errors due to dropped packets since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 26 } wmppTotalStreamTerminations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Stream Terminations is the total number of streams that were terminated due to inactivity or errors since the last time the counter was reset. This includes terminations that occurred because player inactivity and timeout limits were exceeded, as well as terminations that were due to events such as late reads." ::= { windowsMediaPublishingPointEntry 27 } wmppTotalStreamingPlayers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Streaming Players is the total number of players that have been streamed data since the last time the counter was reset." ::= { windowsMediaPublishingPointEntry 28 } windowsMediaStationService OBJECT-IDENTITY STATUS current DESCRIPTION "The Windows Media Station Service performance object provides statistics about the Windows Media Station service that provides multicasting, distribution and storage functions for ASF streams." ::= { advanced 90 } wmssControllers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of controllers currently connected to the server." ::= { windowsMediaStationService 1 } wmssStations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of station objects that currently exist in the server." ::= { windowsMediaStationService 2 } wmssStreams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of stream objects that currently exist in the server." ::= { windowsMediaStationService 3 } windowsMediaUnicastService OBJECT-IDENTITY STATUS current DESCRIPTION "The Windows Media Unicast Service performance object provides statistics about the Windows Media service Unicast service that provides unicasting functions for Advanced Streaming Format (ASF) streams." ::= { advanced 91 } wmusActiveLiveUnicastStreams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Live Unicast streams that are being streamed." ::= { windowsMediaUnicastService 1 } wmusActiveStreams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of streams that are being streamed." ::= { windowsMediaUnicastService 2 } wmusActiveTCPStreams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of TCP streams that are being streamed." ::= { windowsMediaUnicastService 3 } wmusActiveUDPStreams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDP streams that are being streamed." ::= { windowsMediaUnicastService 4 } wmusAggregateReadRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total, aggregate rate (bytes/sec) of file reads." ::= { windowsMediaUnicastService 5 } wmusAggregateSendRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total, aggregate rate (bytes/sec) of stream transmission." ::= { windowsMediaUnicastService 6 } wmusAllocatedBandwidth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The bandwidth (bytes/sec) currently allocated by clients." ::= { windowsMediaUnicastService 7 } wmusAuthenticationRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times an authentication plugin is called to authenticate a client. Depending on the protocol in use, either HTTP or Microsoft Media Server (MMS), a single client may be authenticated once or several times when accessing each piece of unicast co" ::= { windowsMediaUnicastService 8 } wmusAuthenticationsDenied OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times clients are denied access to unicast content by authentication plugins. Clients are denied access by an authentication plugin when their IDs cannot be verified, no user accounts exist, or the authentication plugin is not working." ::= { windowsMediaUnicastService 9 } wmusAuthorizationRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times an authorization plugin is called to authorize a client. Each client action, such as opening or playing unicast content, is separately authorized; therefore, the total number of authorization requests is greater than the number of connecte" ::= { windowsMediaUnicastService 10 } wmusAuthorizationsRefused OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times clients are denied access to unicast content by authorization plugins. Plugins will deny access to clients based on their function; for example, a billing plugin may deny client access to unicast content if the user account contains insuff" ::= { windowsMediaUnicastService 11 } wmusConnectedClients OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of clients connected to this server." ::= { windowsMediaUnicastService 12 } wmusConnectionRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which clients are connecting to the server." ::= { windowsMediaUnicastService 13 } wmusHTTPStreams OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of HTTP streams being streamed." ::= { windowsMediaUnicastService 14 } wmusHTTPStreamsReadingHeader OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of clients connected to the server via HTTP and reading a file header, but not yet streaming the unicast content. HTTP Streams Reading Header and HTTP Streams Reading Body equal the total number of clients connected to the server via HTTP, as indic" ::= { windowsMediaUnicastService 15 } wmusHTTPStreamsStreamingBody OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of connected clients that have read the file header and are actively streaming unicast content via HTTP. HTTP Streams Reading Body and HTTP Streams Reading Header equal the total number of clients connected to the server via HTTP, as indicated by H" ::= { windowsMediaUnicastService 16 } wmusLateReads OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of late read completions per second." ::= { windowsMediaUnicastService 17 } wmusPendingConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of clients attempting to connect to the server but are not yet connected. This number may be high if the server is running near maximum capacity and cannot process a large number of connection requests in a timely manner." ::= { windowsMediaUnicastService 18 } wmusPluginErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times plugins failed to perform their function. For example, a plugin couldn't reach its user database, the plugin crashed, and so on." ::= { windowsMediaUnicastService 19 } wmusPluginEvents OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of events reported to plugins. An indicator of how much the server is using external plugins." ::= { windowsMediaUnicastService 20 } wmusSchedulingRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate (tasks/sec) at which tasks are being scheduled." ::= { windowsMediaUnicastService 21 } wmusStreamErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of errors occuring per second." ::= { windowsMediaUnicastService 22 } wmusStreamTerminations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The rate at which streams are being terminated due to errors." ::= { windowsMediaUnicastService 23 } wmusUDPResendRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times clients ask the server to resend a data packet that was received in error. This value may be high when the server cannot send packets via UDP reliably. A good indicator of server or network overload." ::= { windowsMediaUnicastService 24 } wmusUDPResendsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of UDP Resend Requests processed by the server. Not all UDP Resend Requests are processed if the server is under a heavy load." ::= { windowsMediaUnicastService 25 } winsServer OBJECT IDENTIFIER ::= { advanced 92 } winsSrvrFailedQueriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Failed Queries/sec" ::= { winsServer 1 } winsSrvrFailedReleasesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Failed Releases/sec" ::= { winsServer 2 } winsSrvrGroupConflictsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Group Conflicts/sec is the rate at which group registration received by the WINS server resulted in conflicts with records in the database." ::= { winsServer 3 } winsSrvrGroupRegsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Group Registrations/sec is the rate at which group registration are received by the WINS server." ::= { winsServer 4 } winsSrvrGroupRenewalsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Group Renewals/sec is the rate at which group renewals are received by the WINS server." ::= { winsServer 5 } winsSrvrQueriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Queries/sec is the rate at which queries are received by the WINS server." ::= { winsServer 6 } winsSrvrReleasesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Releases/sec is the rate at which releases are received by the WINS server." ::= { winsServer 7 } winsSrvrSuccessfulQueriesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Successful Queries/sec" ::= { winsServer 8 } winsSrvrSuccessfulReleasesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Successful Releases/sec" ::= { winsServer 9 } winsSrvrTotalNumConflictsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Conflicts/sec is the sum of the Unique and Group conflicts per sec. This is the total rate at which conflicts were seen by the WINS server." ::= { winsServer 10 } winsSrvrTotalNumRegsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Registrations/sec is the sum of the Unique and Group registrations per sec. This is the total rate at which registration are received by the WINS server." ::= { winsServer 11 } winsSrvrTotalNumRenewalsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total Number of Renewals/sec is the sum of the Unique and Group renewals per sec. This is the total rate at which renewals are received by the WINS server." ::= { winsServer 12 } winsSrvrUniqueConflictsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Conflicts/sec is the rate at which unique registrations/renewals received by the WINS server resulted in conflicts with records in the database." ::= { winsServer 13 } winsSrvrUniqueRegsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Registrations/sec is the rate at which unique registration are received by the WINS server." ::= { winsServer 14 } winsSrvrUniqueRenewalsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Unique Renewals/sec is the rate at which unique renewals are received by the WINS server." ::= { winsServer 15 } wmiObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Number of WMI High Performance provider returned by WMI Adapter" ::= { advanced 93 } wmiObjectsHiPerfClasses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows High Performance Classes" ::= { wmiObjects 1 } wmiObjectsHiPerfValidity OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows if High Performance Classes are valid" ::= { wmiObjects 2 } bitsNetUtilization OBJECT-IDENTITY STATUS current DESCRIPTION "BITS Per Job Network Utilization" ::= { advanced 94 } bnuBITSDownloadBlockSizeBytes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Size of the next download block for BITS" ::= { bitsNetUtilization 1 } bnuBITSDownloadResponseIntvlMsec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "BITS download response interval (msec)" ::= { bitsNetUtilization 2 } bnuEstBWAvailRemoteBitsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Estimated bandwidth available to the remote system (Bits/sec)" ::= { bitsNetUtilization 3 } bnuIGDSpeedBitsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Estimate of the IGD's Internet connection speed (Bits/Sec)" ::= { bitsNetUtilization 4 } bnuNetcardSpeedBitsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Estimate of the local netcard's speed (Bits/Sec)" ::= { bitsNetUtilization 5 } bnuPercentIGDFree OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Estimate of most recent percent IGD Internet connection utilization" ::= { bitsNetUtilization 6 } bnuPercentNetcardFree OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Estimate of most recent percent network interface utilization" ::= { bitsNetUtilization 7 } bnuRemoteServerSpeedBitsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Estimate of Remote Server Speed (Bits/Sec)" ::= { bitsNetUtilization 8 } advDatabaseTable OBJECT-TYPE SYNTAX SEQUENCE OF AdvDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Database provides performance statistics for each process using the ESE high performance embedded database management system." ::= { advanced 95 } advDatabaseEntry OBJECT-TYPE SYNTAX AdvDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Database' object." INDEX { adbInstance } ::= { advDatabaseTable 1 } AdvDatabaseEntry ::= SEQUENCE { adbInstance InstanceName, adbDatabaseCachePercentHit Gauge32, adbDatabaseCacheSize Gauge32, adbDatabaseCacheSizeMB Gauge32, adbDatabasePageEvictionsPerSec Gauge32, adbDatabasePageFaultStallsPerSec Gauge32, adbDatabasePageFaultsPerSec Gauge32, adbIPerODatabaseReadsAvgLatency Gauge32, adbIPerODatabaseReadsPerSec Gauge32, adbIPerODatabaseWritesAvgLatency Gauge32, adbIPerODatabaseWritesPerSec Gauge32, adbIPerOLogReadsPerSec Gauge32, adbIPerOLogWritesAverageLatency Gauge32, adbIPerOLogWritesPerSec Gauge32, adbLogBytesWritePerSec Gauge32, adbLogRecordStallsPerSec Gauge32, adbLogThreadsWaiting Gauge32, adbLogWritesPerSec Gauge32, adbPagesConverted Gauge32, adbPagesConvertedPerSec Gauge32, adbRecordsConverted Gauge32, adbRecordsConvertedPerSec Gauge32, adbSessionsPercentUsed Gauge32, adbSessionsInUse Gauge32, adbTableOpenCachePercentHit Gauge32, adbTableOpenCacheHitsPerSec Gauge32, adbTableOpenCacheMissesPerSec Gauge32, adbTableOpensPerSec Gauge32, adbVersionBucketsAllocated Gauge32 } adbInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { advDatabaseEntry 1 } adbDatabaseCachePercentHit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Cache % Hit is the percentage of database file page requests that were fulfilled by the database cache without causing a file operation. If this percentage is too low, the database cache size may be too small." ::= { advDatabaseEntry 2 } adbDatabaseCacheSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Cache Size is the amount of system memory used by the database cache manager to hold commonly used information from the database file(s) to prevent file operations. If the database cache size seems to be too small for optimal performance and there is very little available memory on the system (see Memory/Available Bytes), adding more memory to the system may increase performance. If there is a lot of available memory on the system and the database cache size is not growing beyond a certain point, the database cache size may be capped at an artificially low limit. Increasing this limit may increase performance." ::= { advDatabaseEntry 3 } adbDatabaseCacheSizeMB OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Cache Size (MB) is the amount of system memory (in MegaBytes) used by the database cache manager to hold commonly used information from the database file(s) to prevent file operations. If the database cache size seems to be too small for optimal performance and there is very little available memory on the system (see Memory/Available Bytes), adding more memory to the system may increase performance. If there is a lot of available memory on the system and the database cache size is not growing beyond a certain point, the database cache size may be capped at an artificially low limit. Increasing this limit may increase performance." ::= { advDatabaseEntry 4 } adbDatabasePageEvictionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Page Evictions/sec is the rate that database file page requests that require the database cache manager to allocate a new page from the database cache force another database page out of the cache. The eviction count is charged when the page is allocated and not when the previous owner of that page was actually evicted from the cache. If this rate is too high, the database cache size may be too small." ::= { advDatabaseEntry 5 } adbDatabasePageFaultStallsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Page Fault Stalls/sec is the rate of page faults that cannot be serviced because there are no pages available for allocation from the database cache. If this counter is non-zero most of the time, the clean threshold may be too low." ::= { advDatabaseEntry 6 } adbDatabasePageFaultsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Page Faults/sec is the rate that database file page requests require the database cache manager to allocate a new page from the database cache." ::= { advDatabaseEntry 7 } adbIPerODatabaseReadsAvgLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Reads Average Latency is the average length of time, in milliseconds, per database read operation." ::= { advDatabaseEntry 8 } adbIPerODatabaseReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Reads/sec is the rate of database read operations completed." ::= { advDatabaseEntry 9 } adbIPerODatabaseWritesAvgLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Writes Average Latency is the average length of time, in milliseconds, per database write operation." ::= { advDatabaseEntry 10 } adbIPerODatabaseWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Writes/sec is the rate of database write operations completed." ::= { advDatabaseEntry 11 } adbIPerOLogReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Log Reads/sec is the rate of logfile read operations completed." ::= { advDatabaseEntry 12 } adbIPerOLogWritesAverageLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Log Writes Average Latency is the average length of time, in milliseconds, per logfile write operation." ::= { advDatabaseEntry 13 } adbIPerOLogWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Log Writes/sec is the rate of logfile write operations completed." ::= { advDatabaseEntry 14 } adbLogBytesWritePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Bytes Write per second is the rate bytes are written to the log." ::= { advDatabaseEntry 15 } adbLogRecordStallsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Record Stalls/sec is the number of log records that cannot be added to the log buffers per second because they are full. If this counter is non-zero most of the time, the log buffer size may be a bottleneck." ::= { advDatabaseEntry 16 } adbLogThreadsWaiting OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Threads Waiting is the number of threads waiting for their data to be written to the log in order to complete an update of the database. If this number is too high, the log may be a bottleneck." ::= { advDatabaseEntry 17 } adbLogWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Writes/sec is the number of times the log buffers are written to the log file(s) per second. If this number approaches the maximum write rate for the media holding the log file(s), the log may be a bottleneck." ::= { advDatabaseEntry 18 } adbPagesConverted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages Converted is the count of database pages that have been converted from an older format" ::= { advDatabaseEntry 19 } adbPagesConvertedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages Converted/sec is the count of times per second a database page is converted from an older database format" ::= { advDatabaseEntry 20 } adbRecordsConverted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Records Converted is the count of database records that have been converted from an older format" ::= { advDatabaseEntry 21 } adbRecordsConvertedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Records Converted/sec is the count of times per second a database record is converted from an older database format" ::= { advDatabaseEntry 22 } adbSessionsPercentUsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sessions % Used is the percentage of database sessions currently open for use by client threads. [Dev Only]" ::= { advDatabaseEntry 23 } adbSessionsInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sessions In Use is the number of database sessions currently open for use by client threads. [Dev Only]" ::= { advDatabaseEntry 24 } adbTableOpenCachePercentHit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Open Cache % Hit is the percentage of database tables opened using cached schema information. If this percentage is too low, the table cache size may be too small." ::= { advDatabaseEntry 25 } adbTableOpenCacheHitsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Open Cache Hits/sec is the number of database tables opened using cached schema information per second. If this rate is too low, the table cache size may be too small." ::= { advDatabaseEntry 26 } adbTableOpenCacheMissesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Open Cache Misses/sec is the number of database tables opened without using cached schema information per second. If this rate is too high, the table cache size may be too small." ::= { advDatabaseEntry 27 } adbTableOpensPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Opens/sec is the number of database tables opened per second." ::= { advDatabaseEntry 28 } adbVersionBucketsAllocated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of version buckets allocated" ::= { advDatabaseEntry 29 } advDatabaseInstancesTable OBJECT-TYPE SYNTAX SEQUENCE OF AdvDatabaseInstancesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'Database ==> Instances' objects." ::= { advanced 96 } advDatabaseInstancesEntry OBJECT-TYPE SYNTAX AdvDatabaseInstancesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Database ==> Instances' object." INDEX { adbiInstance } ::= { advDatabaseInstancesTable 1 } AdvDatabaseInstancesEntry ::= SEQUENCE { adbiInstance InstanceName, adbIODatabaseReadsAverageLatency Gauge32, adbIODatabaseReadsPerSec Gauge32, adbIODatabaseWriteAverageLatency Gauge32, adbIODatabaseWritesPerSec Gauge32, adbIOLogReadsPerSec Gauge32, adbIOLogWritesAverageLatency Gauge32, adbIOLogWritesPerSec Gauge32, adbiLogBytesWritePerSec Gauge32, adbiLogGenCheckpointDepth Gauge32, adbiLogGenCheckpointDepthMax Gauge32, adbiLogGenLossResiliencyDepth Gauge32, adbiLogRecordStallsPerSec Gauge32, adbiLogThreadsWaiting Gauge32, adbiLogWritesPerSec Gauge32, adbiPagesConverted Gauge32, adbiPagesConvertedPerSec Gauge32, adbiRecordsConverted Gauge32, adbiRecordsConvertedPerSec Gauge32, adbiSessionsPercentUsed Gauge32, adbiSessionsInUse Gauge32, adbiStreamBackupPagesReadPerSec Gauge32, adbiTableOpenCachePercentHit Gauge32, adbiTableOpenCacheHitsPerSec Gauge32, adbiTableOpenCacheMissesPerSec Gauge32, adbiTableOpensPerSec Gauge32, adbiVersionBucketsAllocated Gauge32 } adbiInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { advDatabaseInstancesEntry 1 } adbIODatabaseReadsAverageLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Reads Average Latency is the average length of time, in milliseconds, per database read operation." ::= { advDatabaseInstancesEntry 2 } adbIODatabaseReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Reads/sec is the rate of database read operations completed." ::= { advDatabaseInstancesEntry 3 } adbIODatabaseWriteAverageLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Writes Average Latency is the average length of time, in milliseconds, per database write operation." ::= { advDatabaseInstancesEntry 4 } adbIODatabaseWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Database Writes/sec is the rate of database write operations completed." ::= { advDatabaseInstancesEntry 5 } adbIOLogReadsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Log Reads/sec is the rate of logfile read operations completed." ::= { advDatabaseInstancesEntry 6 } adbIOLogWritesAverageLatency OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Log Writes Average Latency is the average length of time, in milliseconds, per logfile write operation." ::= { advDatabaseInstancesEntry 7 } adbIOLogWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "I/O Log Writes/sec is the rate of logfile write operations completed." ::= { advDatabaseInstancesEntry 8 } adbiLogBytesWritePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Bytes Write per second is the rate bytes are written to the log." ::= { advDatabaseInstancesEntry 9 } adbiLogGenCheckpointDepth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Generation Checkpoint Depth represents the amount of work, in count of log files, that will need to be redone or undone to the database file(s) if the process crashes." ::= { advDatabaseInstancesEntry 10 } adbiLogGenCheckpointDepthMax OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Record Stalls/sec is the number of log records that cannot be added to the log buffers per second because they are full. If this counter is non-zero most of the time, the log buffer size may be a bottleneck." ::= { advDatabaseInstancesEntry 11 } adbiLogGenLossResiliencyDepth OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Threads Waiting is the number of threads waiting for their data to be written to the log in order to complete an update of the database. If this number is too high, the log may be a bottleneck." ::= { advDatabaseInstancesEntry 12 } adbiLogRecordStallsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Log Writes/sec is the number of times the log buffers are written to the log file(s) per second. If this number approaches the maximum write rate for the media holding the log file(s), the log may be a bottleneck." ::= { advDatabaseInstancesEntry 13 } adbiLogThreadsWaiting OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages Converted is the count of database pages that have been converted from an older format" ::= { advDatabaseInstancesEntry 14 } adbiLogWritesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pages Converted/sec is the count of times per second a database page is converted from an older database format" ::= { advDatabaseInstancesEntry 15 } adbiPagesConverted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Records Converted is the count of database records that have been converted from an older format" ::= { advDatabaseInstancesEntry 16 } adbiPagesConvertedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Records Converted/sec is the count of times per second a database record is converted from an older database format" ::= { advDatabaseInstancesEntry 17 } adbiRecordsConverted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sessions % Used is the percentage of database sessions currently open for use by client threads. [Dev Only]" ::= { advDatabaseInstancesEntry 18 } adbiRecordsConvertedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Sessions In Use is the number of database sessions currently open for use by client threads. [Dev Only]" ::= { advDatabaseInstancesEntry 19 } adbiSessionsPercentUsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Streaming Backup Pages Read/sec is the rate of database read operationsperformed for the purpose of streaming backups." ::= { advDatabaseInstancesEntry 20 } adbiSessionsInUse OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Open Cache % Hit is the percentage of database tables opened using cached schema information. If this percentage is too low, the table cache size may be too small." ::= { advDatabaseInstancesEntry 21 } adbiStreamBackupPagesReadPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Open Cache Hits/sec is the number of database tables opened using cached schema information per second. If this rate is too low, the table cache size may be too small." ::= { advDatabaseInstancesEntry 22 } adbiTableOpenCachePercentHit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Open Cache Misses/sec is the number of database tables opened without using cached schema information per second. If this rate is too high, the table cache size may be too small." ::= { advDatabaseInstancesEntry 23 } adbiTableOpenCacheHitsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Opens/sec is the number of database tables opened per second." ::= { advDatabaseInstancesEntry 24 } adbiTableOpenCacheMissesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of version buckets allocated" ::= { advDatabaseInstancesEntry 25 } adbiTableOpensPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Table Opens/sec is the number of database tables opened per second." ::= { advDatabaseInstancesEntry 26 } adbiVersionBucketsAllocated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of version buckets allocated" ::= { advDatabaseInstancesEntry 27 } advDatabaseTableClassesTable OBJECT-TYPE SYNTAX SEQUENCE OF AdvDatabaseTableClassesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'Database ==> TableClasses' objects." ::= { advanced 97 } advDatabaseTableClassesEntry OBJECT-TYPE SYNTAX AdvDatabaseTableClassesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Database ==> TableClasses' object." INDEX { adbtcInstance } ::= { advDatabaseTableClassesTable 1 } AdvDatabaseTableClassesEntry ::= SEQUENCE { adbtcInstance InstanceName, adbtcCacheSizeMB Gauge32 } adbtcInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { advDatabaseTableClassesEntry 1 } adbtcCacheSizeMB OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Database Cache Size (MB) is the amount of system memory (in MegaBytes) used by the database cache manager to hold commonly used information from the database file(s) to prevent file operations. If the database cache size seems to be too small for optimal performance and there is very little available memory on the system (see Memory/Available Bytes), adding more memory to the system may increase performance. If there is a lot of available memory on the system and the database cache size is not growing beyond a certain point, the database cache size may be capped at an artificially low limit. Increasing this limit may increase performance." ::= { advDatabaseTableClassesEntry 2 } genericIKEAndAuthIP OBJECT-IDENTITY STATUS current DESCRIPTION "Generic IKE and AuthIP is the set of Internet Protocol security (IPsec) Internet Key Exchange (IKE) and Authenticated IP (AuthIP) counters that are generic and do not apply to a specific Internet Protocol version." ::= { advanced 98 } giaipAuthIPMainModeNegotTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AuthIP Main Mode Negotiation Time is the number of milliseconds taken for the last Authenticated IP Main Mode security association negotiated." ::= { genericIKEAndAuthIP 1 } giaipAuthIPQuickModeNegotTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "AuthIP Quick Mode Negotiation Time is the number of milliseconds taken for the last Authenticated IP Quick Mode security association negotiated." ::= { genericIKEAndAuthIP 2 } giaipExtendedModeNegotiationTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Extended Mode Negotiation Time is the number of milliseconds taken for the last Extended Mode security association negotiated." ::= { genericIKEAndAuthIP 3 } giaipFailedNegotiations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failed Negotiations is the number of failed negotiations for IKE and AuthIP since IPsec was last started." ::= { genericIKEAndAuthIP 4 } giaipFailedNegotiationsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failed Negotiations per second is the rate of failed negotiations attempted for IKE and AuthIP." ::= { genericIKEAndAuthIP 5 } giaipIKEMainModeNegotiationTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Main Mode Negotiation Time is the number of milliseconds taken for the last IKE Main Mode security association negotiated." ::= { genericIKEAndAuthIP 6 } giaipIKEQuickModeNegotiationTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Quick Mode Negotiation Time is the number of milliseconds taken for the last IKE Quick Mode security association negotiated." ::= { genericIKEAndAuthIP 7 } giaipInvalidPacketReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Invalid Packets Received per second is the rate at which invalid IPsec packets are being received." ::= { genericIKEAndAuthIP 8 } giaipPacketsReceivedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Received per second is the rate at which validated IPsec packets are being received." ::= { genericIKEAndAuthIP 9 } giaipSuccessfulNegotiations OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Successful Negotiations is the number of negotiations completed for IKE and AuthIP since IPsec was last started." ::= { genericIKEAndAuthIP 10 } giaipSuccessfulNegotiationPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Successful Negotiations per second is the rate of negotiations completed for IKE and AuthIP." ::= { genericIKEAndAuthIP 11 } httpService OBJECT-IDENTITY STATUS current DESCRIPTION "Set of HTTP service counters" ::= { advanced 99 } httpServiceCurrentUrisCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of URIs currently cached by the kernel" ::= { httpService 1 } httpServiceTotalFlushedUris OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of URIs that have been removed from the kernel URI cache since service startup" ::= { httpService 2 } httpServiceTotalUrisCached OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of URIs added to the kernel since service startup" ::= { httpService 3 } httpServiceUriCacheFlushes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of kernel URI cache flushes (complete or partial) since service startup" ::= { httpService 4 } httpServiceUriCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of successful lookups in the kernel URI cache" ::= { httpService 5 } httpServiceUriCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of unsuccessful lookups in the kernel URI cache" ::= { httpService 6 } httpServiceRequestQueuesTable OBJECT-TYPE SYNTAX SEQUENCE OF HTTPServiceRequestQueuesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set of request queue counters" ::= { advanced 100 } httpServiceRequestQueuesEntry OBJECT-TYPE SYNTAX HTTPServiceRequestQueuesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'HTTP Service Request Queues' object." INDEX { httpsrqInstance } ::= { httpServiceRequestQueuesTable 1 } HTTPServiceRequestQueuesEntry ::= SEQUENCE { httpsrqInstance InstanceName, httpsrqArrivalRate Gauge32, httpsrqCacheHitRate Gauge32, httpsrqCurrentQueueSize Gauge32, httpsrqMaxQueueItemAge Gauge32, httpsrqRejectedRequests Gauge32, httpsrqRejectionRate Gauge32 } httpsrqInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { httpServiceRequestQueuesEntry 1 } httpsrqArrivalRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate at which requests are arriving in the queue" ::= { httpServiceRequestQueuesEntry 2 } httpsrqCacheHitRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of cache hits for the queue" ::= { httpServiceRequestQueuesEntry 3 } httpsrqCurrentQueueSize OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests in the queue" ::= { httpServiceRequestQueuesEntry 4 } httpsrqMaxQueueItemAge OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Age of the oldest request in the queue" ::= { httpServiceRequestQueuesEntry 5 } httpsrqRejectedRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of requests rejected from the queue" ::= { httpServiceRequestQueuesEntry 6 } httpsrqRejectionRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate at which requests are rejected from the queue" ::= { httpServiceRequestQueuesEntry 7 } httpServiceUrlGroupsTable OBJECT-TYPE SYNTAX SEQUENCE OF HTTPServiceUrlGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set of URL Group-specific counters" ::= { advanced 101 } httpServiceUrlGroupsEntry OBJECT-TYPE SYNTAX HTTPServiceUrlGroupsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'HTTP Service Url Groups' object." INDEX { httpsugInstance } ::= { httpServiceUrlGroupsTable 1 } HTTPServiceUrlGroupsEntry ::= SEQUENCE { httpsugInstance InstanceName, httpsugAllRequests Gauge32, httpsugBytesReceivedRate Gauge32, httpsugBytesSentRate Gauge32, httpsugBytesTransferredRate Gauge32, httpsugConnectionAttempts Gauge32, httpsugCurrentConnections Gauge32, httpsugGetRequests Gauge32, httpsugHeadRequests Gauge32, httpsugMaxConnections Gauge32 } httpsugInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { httpServiceUrlGroupsEntry 1 } httpsugAllRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of HTTP requests made for this site" ::= { httpServiceUrlGroupsEntry 2 } httpsugBytesReceivedRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of received data by HTTP service for this site" ::= { httpServiceUrlGroupsEntry 3 } httpsugBytesSentRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of sending data by HTTP service for this site" ::= { httpServiceUrlGroupsEntry 4 } httpsugBytesTransferredRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of total bytes transferred (sent and received) by HTTP service for this site" ::= { httpServiceUrlGroupsEntry 5 } httpsugConnectionAttempts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate at which connection attempts are being made for this site" ::= { httpServiceUrlGroupsEntry 6 } httpsugCurrentConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current connections established for this site" ::= { httpServiceUrlGroupsEntry 7 } httpsugGetRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate at which GET method requests are made for this site" ::= { httpServiceUrlGroupsEntry 8 } httpsugHeadRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate at which HEAD method requests are made for this site" ::= { httpServiceUrlGroupsEntry 9 } httpsugMaxConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of concurrent connections established for this site" ::= { httpServiceUrlGroupsEntry 10 } securityPerProcessStatisticTable OBJECT-TYPE SYNTAX SEQUENCE OF SecurityPerProcessStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "These counters track the number of security resources and handles used per process." ::= { advanced 102 } securityPerProcessStatisticEntry OBJECT-TYPE SYNTAX SecurityPerProcessStatisticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Security Per-Process Statistics' object." INDEX { sppsInstance } ::= { securityPerProcessStatisticTable 1 } SecurityPerProcessStatisticEntry ::= SEQUENCE { sppsInstance InstanceName, sppsContextHandles Gauge32, sppsCredentialHandles Gauge32 } sppsInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { securityPerProcessStatisticEntry 1 } sppsContextHandles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of context handles in use by a given process. Context handles are associated with security contexts established between a client application and a remote peer." ::= { securityPerProcessStatisticEntry 2 } sppsCredentialHandles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of credential handles in use by a given process. Credential handles are handles to pre-existing credentials, such as a password, that are associated with a user and are established through a system logon." ::= { securityPerProcessStatisticEntry 3 } securitySystemWideStatistics OBJECT-IDENTITY STATUS current DESCRIPTION "These counters track authentication performance on a per second basis." ::= { advanced 103 } sswsActiveSChannelSessionCache OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Secure Sockets Layer (SSL) entries that are currently stored in the secure channel (Schannel) session cache and that are currently in use. The Schannel session cache stores information about successfully established sessions, such as SSL session IDs. Clients can use this information to reconnect to a server without performaing a full SSL handshake." ::= { securitySystemWideStatistics 1 } sswsDigestAuthentications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Digest authentications that are being processed per second." ::= { securitySystemWideStatistics 2 } sswsKDCASRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Autonomous System (AS) requests that are being processed by the Key Distribution Center (KDC) per second. Clients use AS requests to obtain a ticket-granting ticket." ::= { securitySystemWideStatistics 3 } sswsKDCTGSRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of ticket-granting service (TGS) requests that are being processed by the Key Distribution Center (KDC) per second. Clients use these TGS requests to obtain a service ticket, which allows a client to access resources on other computers." ::= { securitySystemWideStatistics 4 } sswsKerberosAuthentications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of times that clients use a ticket to authenticate to this computer per second." ::= { securitySystemWideStatistics 5 } sswsNTLMAuthentications OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of NTLM authentications processed by this computer per second." ::= { securitySystemWideStatistics 6 } sswsSSLClientSideFullHandshakes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Secure Sockets Layer (SSL) full client-side handshakes that are being processed per second. During a handshake, signals are exchanged to acknowledge that communication can occur between computers or other devices." ::= { securitySystemWideStatistics 7 } sswsSSLClientSideReconHandshakes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Secure Sockets Layer (SSL) client-side reconnect handshakes that are being processed per second. Reconnect handshakes allow session keys from previous SSL sessions to be used to resume a client/server connection, and they require less memory to process than full handshakes." ::= { securitySystemWideStatistics 8 } sswsSSLServerSideFullHandshakes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Secure Sockets Layer (SSL) full server-side handshakes that are being processed per second. During a handshake, signals are exchanged to acknowledge that communication can occur between computers or other devices." ::= { securitySystemWideStatistics 9 } sswsSSLServerSideReconHandshakes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Secure Sockets Layer (SSL) server-side reconnect handshakes that are being processed per second. Reconnect handshakes allow session keys from previous SSL sessions to be used to resume a client/server connection, and they require less memory to process than full handshakes." ::= { securitySystemWideStatistics 10 } sswsSchannelSessionCacheEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This counter tracks the number of Secure Sockets Layer (SSL) entries that are currently stored in the secure channel (Schannel) session cache. The Schannel session cache stores information about successfully established sessions, such as SSL session IDs. Clients can use this information to reconnect to a server without performing a full SSL handshake." ::= { securitySystemWideStatistics 11 } usbTable OBJECT-TYPE SYNTAX SEQUENCE OF USBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "USB I/O Counters" ::= { advanced 104 } usbEntry OBJECT-TYPE SYNTAX USBEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'USB' object." INDEX { usbInstance } ::= { usbTable 1 } USBEntry ::= SEQUENCE { usbInstance InstanceName, usbPercentTotalBWUsedInterrupt Gauge32, usbPercentTotalBWUseIsoTransfers Gauge32, usbAvgMsLatencyForISOTransfers Gauge32, usbAvgBytesPerTransfer Gauge32, usbBulkBytesPerSec Gauge32, usbControlDataBytesPerSec Gauge32, usbControllerPCIInterruptsPerSec Gauge32, usbControllerWorkSignalsPerSec Gauge32, usbHostControlAsyncCacheFlush Gauge32, usbHostControllerAsyncIdle Gauge32, usbHostControllerIdle Gauge32, usbHostControllerPerdiodicIdle Gauge32, usbHostControlPeriodicCacheFlush Gauge32, usbInterruptBytesPerSec Gauge32, usbIsoPacketErrorsPerSec Gauge32, usbIsochronousBytesPerSec Gauge32, usbTransferErrorsPerSec Gauge32 } usbInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { usbEntry 1 } usbPercentTotalBWUsedInterrupt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the percentage of BW reserved for interrupt transfers" ::= { usbEntry 2 } usbPercentTotalBWUseIsoTransfers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the percentage of BW reserved for ISO transfers" ::= { usbEntry 3 } usbAvgMsLatencyForISOTransfers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Avg number of ms between the current frame and the start frame of an ISO transfer when scheduled. For device instances only." ::= { usbEntry 4 } usbAvgBytesPerTransfer OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the average size of all transfer URBs. For device instances only." ::= { usbEntry 5 } usbBulkBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current bulk transfer rate in bytes/sec." ::= { usbEntry 6 } usbControlDataBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current control transfer rate in bytes/sec." ::= { usbEntry 7 } usbControllerPCIInterruptsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the rate of PCI interrupt generation by the USB controller. For controller instances only." ::= { usbEntry 8 } usbControllerWorkSignalsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current rate Work Signals generated per second by the usbport driver. For controller instances only." ::= { usbEntry 9 } usbHostControlAsyncCacheFlush OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incremented each time the controller async cache is flushed." ::= { usbEntry 10 } usbHostControllerAsyncIdle OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Non-Zero value if the host controller async schedule is not running(idle)." ::= { usbEntry 11 } usbHostControllerIdle OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Non-zero value if the host controller is not running(idle)." ::= { usbEntry 12 } usbHostControllerPerdiodicIdle OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Non-Zero if the periodic schedule is not running(idle)." ::= { usbEntry 13 } usbHostControlPeriodicCacheFlush OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Incremented each time the controller periodic cache is flushed." ::= { usbEntry 14 } usbInterruptBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current interrupt transfer rate in bytes/sec." ::= { usbEntry 15 } usbIsoPacketErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of ISO packets that are NOT late, but complete with an error. For device instances only." ::= { usbEntry 16 } usbIsochronousBytesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current isochronous transfer rate in bytes/sec." ::= { usbEntry 17 } usbTransferErrorsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Transfer URBs completing with an error status. For device instances only." ::= { usbEntry 18 } videoSchedulerTable OBJECT-TYPE SYNTAX SEQUENCE OF VideoSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance counter class of Video Scheduler" ::= { advanced 105 } videoSchedulerEntry OBJECT-TYPE SYNTAX VideoSchedulerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Video Scheduler' object." INDEX { vschdInstance } ::= { videoSchedulerTable 1 } VideoSchedulerEntry ::= SEQUENCE { vschdInstance InstanceName, vschdPercentGPUBusy Gauge32, vschdDMABufferCompletedPerSec Gauge32, vschdDMABufferPreemptedPerSec Gauge32, vschdDMABufferSubmittedPerSec Gauge32, vschdGPUContext Gauge32, vschdGPUContextSwitchPerSec Gauge32, vschdPresentPerSec Gauge32 } vschdInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { videoSchedulerEntry 1 } vschdPercentGPUBusy OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Percentage of GPU Busy time per second" ::= { videoSchedulerEntry 2 } vschdDMABufferCompletedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DMA Buffer completed by GPU per second" ::= { videoSchedulerEntry 3 } vschdDMABufferPreemptedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DMA Buffer preempted by GPU per second" ::= { videoSchedulerEntry 4 } vschdDMABufferSubmittedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of DMA Buffer sent to GPU per second" ::= { videoSchedulerEntry 5 } vschdGPUContext OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GPU context" ::= { videoSchedulerEntry 6 } vschdGPUContextSwitchPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of GPU context switch per second" ::= { videoSchedulerEntry 7 } vschdPresentPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Present processed by GPU per second" ::= { videoSchedulerEntry 8 } wFP OBJECT IDENTIFIER ::= { advanced 106 } wFPProviderCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Provider Count is the number of providers registered with the Windows Filtering Platform." ::= { wFP 1 } wFPv4 OBJECT-IDENTITY STATUS current DESCRIPTION "WFPv4 is the set of Windows Filtering Platform counters that apply to traffic and connections over Internet Protocol version 4." ::= { advanced 107 } wFPv4ActiveInConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Inbound Connections is the number of current inbound connections allowed by the Windows Filtering Platform." ::= { wFPv4 1 } wFPv4ActiveOutConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Outbound Connections is the number of current outbound connections allowed by the Windows Filtering Platform." ::= { wFPv4 2 } wFPv4AllowedClassifiesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Allowed Classifies per second is the rate of Windows Filtering Platform security rule evaluations which allow network activity." ::= { wFPv4 3 } wFPv4BlockedBinds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked Binds is the number of network resource assignment requests blocked by the Windows Filtering Platform since the computer was last started." ::= { wFPv4 4 } wFPv4InConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Connections is the number of inbound connections allowed by the Windows Filtering Platform since the computer was last started." ::= { wFPv4 5 } wFPv4InConnectionsAllowedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Connections Allowed per second is the rate at which inbound connections are being allowed by the Windows Filtering Platform." ::= { wFPv4 6 } wFPv4InConnectionsBlockedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Connections Blocked per second is the rate at which inbound connections are being blocked by the Windows Filtering Platform." ::= { wFPv4 7 } wFPv4InPacketsDiscardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Packets Discarded per second is the rate at which inbound packets are discarded by the Windows Filtering Platform." ::= { wFPv4 8 } wFPv4OutConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Connections is the number of outbound connections allowed by the Windows Filtering Platform since the computer was last started." ::= { wFPv4 9 } wFPv4OutConnectionsAllowedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Connections Allowed per second is the rate at which outbound connections are being allowed by the Windows Filtering Platform." ::= { wFPv4 10 } wFPv4OutConnectionsBlockedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Connections Blocked per second is the rate at which outbound connections are being blocked by the Windows Filtering Platform." ::= { wFPv4 11 } wFPv4OutPacketsDiscardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Packets Discarded per second is the rate at which outbound packets are discarded by the Windows Filtering Platform." ::= { wFPv4 12 } wFPv4PacketsDiscardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Discarded per second is the rate at which the total of inbound and outbound packets are discarded by the Windows Filtering Platform." ::= { wFPv4 13 } wFPv6 OBJECT-IDENTITY STATUS current DESCRIPTION "WFPv6 is the set of Windows Filtering Platform counters that apply to traffic and connections over Internet Protocol version 6." ::= { advanced 108 } wFPv6ActiveInConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Inbound Connections is the number of current inbound connections allowed by the Windows Filtering Platform." ::= { wFPv6 1 } wFPv6ActiveOutConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Active Outbound Connections is the number of current outbound connections allowed by the Windows Filtering Platform." ::= { wFPv6 2 } wFPv6AllowedClassifiesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Allowed Classifies per second is the rate of Windows Filtering Platform security rule evaluations which allow network activity." ::= { wFPv6 3 } wFPv6BlockedBinds OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Blocked Binds is the number of network resource assignment requests blocked by the Windows Filtering Platform since the computer was last started." ::= { wFPv6 4 } wFPv6InConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Connections is the number of inbound connections allowed by the Windows Filtering Platform since the computer was last started." ::= { wFPv6 5 } wFPv6InConnectionsAllowedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Connections Allowed per second is the rate at which inbound connections are being allowed by the Windows Filtering Platform." ::= { wFPv6 6 } wFPv6InConnectionsBlockedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Connections Blocked per second is the rate at which inbound connections are being blocked by the Windows Filtering Platform." ::= { wFPv6 7 } wFPv6InPacketsDiscardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inbound Packets Discarded per second is the rate at which inbound packets are discarded by the Windows Filtering Platform." ::= { wFPv6 8 } wFPv6OutConnections OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Connections is the number of outbound connections allowed by the Windows Filtering Platform since the computer was last started." ::= { wFPv6 9 } wFPv6OutConnectionsAllowedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Connections Allowed per second is the rate at which outbound connections are being allowed by the Windows Filtering Platform." ::= { wFPv6 10 } wFPv6OutConnectionsBlockedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Connections Blocked per second is the rate at which outbound connections are being blocked by the Windows Filtering Platform." ::= { wFPv6 11 } wFPv6OutPacketsDiscardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Outbound Packets Discarded per second is the rate at which outbound packets are discarded by the Windows Filtering Platform." ::= { wFPv6 12 } wFPv6PacketsDiscardedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets Discarded per second is the rate at which the total of inbound and outbound packets are discarded by the Windows Filtering Platform." ::= { wFPv6 13 } windowsWorkflowFoundationTable OBJECT-TYPE SYNTAX SEQUENCE OF WindowsWorkflowFoundationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'Windows Workflow Foundation' objects." ::= { advanced 109 } windowsWorkflowFoundationEntry OBJECT-TYPE SYNTAX WindowsWorkflowFoundationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Windows Workflow Foundation' object." INDEX { wwfInstance } ::= { windowsWorkflowFoundationTable 1 } WindowsWorkflowFoundationEntry ::= SEQUENCE { wwfInstance InstanceName, wwfWorkflowsAborted Gauge32, wwfWorkflowsAbortedPerSec Gauge32, wwfWorkflowsCompleted Gauge32, wwfWorkflowsCompletedPerSec Gauge32, wwfWorkflowsCreated Gauge32, wwfWorkflowsCreatedPerSec Gauge32, wwfWorkflowsExecuting Gauge32, wwfWorkflowsIdlePerSec Gauge32, wwfWorkflowsInMemory Gauge32, wwfWorkflowsLoaded Gauge32, wwfWorkflowsLoadedPerSec Gauge32, wwfWorkflowsPending Gauge32, wwfWorkflowsPersisted Gauge32, wwfWorkflowsPersistedPerSec Gauge32, wwfWorkflowsRunnable Gauge32, wwfWorkflowsSuspended Gauge32, wwfWorkflowsSuspendedPerSec Gauge32, wwfWorkflowsTerminated Gauge32, wwfWorkflowsTerminatedPerSec Gauge32, wwfWorkflowsUnloaded Gauge32, wwfWorkflowsUnloadedPerSec Gauge32 } wwfInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { windowsWorkflowFoundationEntry 1 } wwfWorkflowsAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows aborted." ::= { windowsWorkflowFoundationEntry 2 } wwfWorkflowsAbortedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows aborted per second." ::= { windowsWorkflowFoundationEntry 3 } wwfWorkflowsCompleted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows completed." ::= { windowsWorkflowFoundationEntry 4 } wwfWorkflowsCompletedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows completed per second." ::= { windowsWorkflowFoundationEntry 5 } wwfWorkflowsCreated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows created." ::= { windowsWorkflowFoundationEntry 6 } wwfWorkflowsCreatedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows created per second." ::= { windowsWorkflowFoundationEntry 7 } wwfWorkflowsExecuting OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflow instances actively executing." ::= { windowsWorkflowFoundationEntry 8 } wwfWorkflowsIdlePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows becoming idle per second." ::= { windowsWorkflowFoundationEntry 9 } wwfWorkflowsInMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows in memory." ::= { windowsWorkflowFoundationEntry 10 } wwfWorkflowsLoaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows loaded." ::= { windowsWorkflowFoundationEntry 11 } wwfWorkflowsLoadedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows loaded per second." ::= { windowsWorkflowFoundationEntry 12 } wwfWorkflowsPending OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows waiting for a thread." ::= { windowsWorkflowFoundationEntry 13 } wwfWorkflowsPersisted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows persisted." ::= { windowsWorkflowFoundationEntry 14 } wwfWorkflowsPersistedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows persisted per second." ::= { windowsWorkflowFoundationEntry 15 } wwfWorkflowsRunnable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows ready to execute." ::= { windowsWorkflowFoundationEntry 16 } wwfWorkflowsSuspended OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows suspended." ::= { windowsWorkflowFoundationEntry 17 } wwfWorkflowsSuspendedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows suspended per second." ::= { windowsWorkflowFoundationEntry 18 } wwfWorkflowsTerminated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows terminated." ::= { windowsWorkflowFoundationEntry 19 } wwfWorkflowsTerminatedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows terminated per second." ::= { windowsWorkflowFoundationEntry 20 } wwfWorkflowsUnloaded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of workflows unloaded." ::= { windowsWorkflowFoundationEntry 21 } wwfWorkflowsUnloadedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of workflows unloaded per second." ::= { windowsWorkflowFoundationEntry 22 } iSCSIInitiatorInstanceTable OBJECT-TYPE SYNTAX SEQUENCE OF ISCSIInitiatorInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "iSCSI Initiator Instance Statistics" ::= { advanced 110 } iSCSIInitiatorInstanceEntry OBJECT-TYPE SYNTAX ISCSIInitiatorInstanceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'iSCSI Initiator Instance' object." INDEX { iscsiInstance } ::= { iSCSIInitiatorInstanceTable 1 } ISCSIInitiatorInstanceEntry ::= SEQUENCE { iscsiInstance InstanceName, iscsiSessionCxnTimeoutErrors Gauge32, iscsiSessionDigestErrors Gauge32, iscsiSessionFormatErrors Gauge32, iscsiSessionsFailed Gauge32 } iscsiInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { iSCSIInitiatorInstanceEntry 1 } iscsiSessionCxnTimeoutErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Session connection timeout error" ::= { iSCSIInitiatorInstanceEntry 2 } iscsiSessionDigestErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Session digest errors" ::= { iSCSIInitiatorInstanceEntry 3 } iscsiSessionFormatErrors OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Count of Session format error" ::= { iSCSIInitiatorInstanceEntry 4 } iscsiSessionsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Sessions failed belonging to this instance" ::= { iSCSIInitiatorInstanceEntry 5 } dtcBridge3 OBJECT-IDENTITY STATUS current DESCRIPTION "MSDTC Bridge 3.0.0.0 performance counters" ::= { advanced 111 } dtcb3AvgParticipantCmtRspnsTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds for the WS-AT service to receive a Commit message response from a participant." ::= { dtcBridge3 1 } dtcb3AvgParticipantPrepRspnsTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average time in milliseconds for the WS-AT service to receive a Prepare message response from a participant." ::= { dtcBridge3 2 } dtcb3CommitRetryCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Commit retry messages that the WS-AT service has sent per second." ::= { dtcBridge3 3 } dtcb3FaultsReceivedCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Fault messages that the WS-AT service has received per second." ::= { dtcBridge3 4 } dtcb3FaultsSentCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Fault messages that the WS-AT service has sent per second." ::= { dtcBridge3 5 } dtcb3MessageSendFailuresPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of WS-AT protocol messages that the WS-AT service failed to send per second." ::= { dtcBridge3 6 } dtcb3PrepareRetryCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Prepare retry messages that the WS-AT service has sent per second." ::= { dtcBridge3 7 } dtcb3PreparedRetryCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Prepared retry messages that the WS-AT service has sent per second." ::= { dtcBridge3 8 } dtcb3ReplayRetryCountPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Replay retry messages that the WS-AT service has sent per second." ::= { dtcBridge3 9 } serviceModelEndpoint3Table OBJECT-TYPE SYNTAX SEQUENCE OF ServiceModelEndpoint3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'ServiceModelEndpoint 3.0.0.0' objects." ::= { advanced 112 } serviceModelEndpoint3Entry OBJECT-TYPE SYNTAX ServiceModelEndpoint3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'ServiceModelEndpoint 3.0.0.0' object." INDEX { sme3Instance } ::= { serviceModelEndpoint3Table 1 } ServiceModelEndpoint3Entry ::= SEQUENCE { sme3Instance InstanceName, sme3Calls Gauge32, sme3CallsDuration Gauge32, sme3CallsFailed Gauge32, sme3CallsFailedPerSecond Gauge32, sme3CallsFaulted Gauge32, sme3CallsFaultedPerSecond Gauge32, sme3CallsOutstanding Gauge32, sme3CallsPerSecond Gauge32, sme3ReliableMessagesDropped Gauge32, sme3ReliableMessagesDropPerSec Gauge32, sme3ReliableSessionsFaulted Gauge32, sme3ReliableSessionsFaultPerSec Gauge32, sme3CallsNotAuthorized Gauge32, sme3CallsNotAuthorizedPerSecond Gauge32, sme3ValidationAuthFail Gauge32, sme3ValidationAuthFailPerSec Gauge32, sme3TransactionsFlowed Gauge32, sme3TransactionsFlowedPerSecond Gauge32 } sme3Instance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { serviceModelEndpoint3Entry 1 } sme3Calls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.Calls.aspx" ::= { serviceModelEndpoint3Entry 2 } sme3CallsDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average duration of calls to this endpoint. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.CallDuration.aspx" ::= { serviceModelEndpoint3Entry 3 } sme3CallsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with unhandled exceptions at this endpoint. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.CallsFailed.aspx" ::= { serviceModelEndpoint3Entry 4 } sme3CallsFailedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with unhandled exceptions at this endpoint per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.CallsFailedPerSecond.aspx" ::= { serviceModelEndpoint3Entry 5 } sme3CallsFaulted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint that returned faults. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.CallsFaulted.aspx" ::= { serviceModelEndpoint3Entry 6 } sme3CallsFaultedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint that returned faults per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.CallsFaultedPerSecond.aspx" ::= { serviceModelEndpoint3Entry 7 } sme3CallsOutstanding OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint that are in progress. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.CallsOutstanding.aspx" ::= { serviceModelEndpoint3Entry 8 } sme3CallsPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.CallsPerSecond.aspx" ::= { serviceModelEndpoint3Entry 9 } sme3ReliableMessagesDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging messages that were dropped at this endpoint. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.RMMessagesDropped.aspx" ::= { serviceModelEndpoint3Entry 10 } sme3ReliableMessagesDropPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging messages that were dropped at this endpoint per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.RMMessagesDroppedPerSecond.aspx" ::= { serviceModelEndpoint3Entry 11 } sme3ReliableSessionsFaulted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging sessions that faulted at this endpoint. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.RMSessionsFaulted.aspx" ::= { serviceModelEndpoint3Entry 12 } sme3ReliableSessionsFaultPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging sessions that faulted at this endpoint per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.RMSessionsFaultedPerSecond.aspx" ::= { serviceModelEndpoint3Entry 13 } sme3CallsNotAuthorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint that failed authorization. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.SecurityCallsNotAuthorized.aspx" ::= { serviceModelEndpoint3Entry 14 } sme3CallsNotAuthorizedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint that failed authorization per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.SecurityCallsNotAuthorizedPerSecond.aspx " ::= { serviceModelEndpoint3Entry 15 } sme3ValidationAuthFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint that failed validation or authentication. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.SecurityValidationAuthenticationFailures .aspx" ::= { serviceModelEndpoint3Entry 16 } sme3ValidationAuthFailPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this endpoint that failed validation or authentication per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.SecurityValidationAuthenticationFailures PerSecond.aspx" ::= { serviceModelEndpoint3Entry 17 } sme3TransactionsFlowed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions that flowed to operations at this endpoint. This counter is incremented any time a transaction ID is present in the message that is sent to the endpoint. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.TxFlowed.aspx" ::= { serviceModelEndpoint3Entry 18 } sme3TransactionsFlowedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions that flowed to operations at this endpoint per second. This counter is incremented any time a transaction ID is present in the message that is sent to the endpoint. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.TxFlowedPerSecond.aspx" ::= { serviceModelEndpoint3Entry 19 } serviceModelOperation3Table OBJECT-TYPE SYNTAX SEQUENCE OF ServiceModelOperation3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'ServiceModelOperation 3.0.0.0' objects." ::= { advanced 113 } serviceModelOperation3Entry OBJECT-TYPE SYNTAX ServiceModelOperation3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'ServiceModelOperation 3.0.0.0' object." INDEX { smo3Instance } ::= { serviceModelOperation3Table 1 } ServiceModelOperation3Entry ::= SEQUENCE { smo3Instance InstanceName, smo3CallFailedPerSecond Gauge32, smo3Calls Gauge32, smo3CallsDuration Gauge32, smo3CallsFailed Gauge32, smo3CallsFaulted Gauge32, smo3CallsFaultedPerSecond Gauge32, smo3CallsOutstanding Gauge32, smo3CallsPerSecond Gauge32, smo3CallsNotAuthorized Gauge32, smo3CallsNotAuthorizedPerSec Gauge32, smo3ValidationAuthFail Gauge32, smo3ValidationAuthFailPerSec Gauge32, smo3TransactionsFlowed Gauge32, smo3TransactionsFlowedPerSecond Gauge32 } smo3Instance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { serviceModelOperation3Entry 1 } smo3CallFailedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with unhandled exceptions in this operation per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.CallsFailedPerSecond.aspx" ::= { serviceModelOperation3Entry 2 } smo3Calls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.Calls.aspx" ::= { serviceModelOperation3Entry 3 } smo3CallsDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average duration of calls to this operation. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.CallDuration.aspx" ::= { serviceModelOperation3Entry 4 } smo3CallsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with unhandled exceptions in this operation. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.CallsFailed.aspx" ::= { serviceModelOperation3Entry 5 } smo3CallsFaulted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation that returned faults. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.CallsFaulted.aspx" ::= { serviceModelOperation3Entry 6 } smo3CallsFaultedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation that returned faults per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.CallsFaultedPerSecond.aspx" ::= { serviceModelOperation3Entry 7 } smo3CallsOutstanding OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation that are in progress. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.CallsOutstanding.aspx" ::= { serviceModelOperation3Entry 8 } smo3CallsPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.CallsPerSecond.aspx" ::= { serviceModelOperation3Entry 9 } smo3CallsNotAuthorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation that failed authorization. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.SecurityCallsNotAuthorized.aspx" ::= { serviceModelOperation3Entry 10 } smo3CallsNotAuthorizedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation that failed authorization per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.SecurityCallsNotAuthorizedPerSecond.asp x" ::= { serviceModelOperation3Entry 11 } smo3ValidationAuthFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation that failed validation or authentication. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.SecurityValidationAuthenticationFailure s.aspx" ::= { serviceModelOperation3Entry 12 } smo3ValidationAuthFailPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this operation that failed validation or authentication per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.SecurityValidationAuthenticationFailure sPerSecond.aspx" ::= { serviceModelOperation3Entry 13 } smo3TransactionsFlowed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions that flowed to this operation. This counter is incremented any time a transaction ID is present in the message sent to the operation. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.TxFlowed.aspx" ::= { serviceModelOperation3Entry 14 } smo3TransactionsFlowedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions that flowed to this operation per second. This counter is incremented any time a transaction ID is present in the message sent to the operation. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Op eration.TxFlowedPerSecond.aspx" ::= { serviceModelOperation3Entry 15 } serviceModelService3Table OBJECT-TYPE SYNTAX SEQUENCE OF ServiceModelService3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'ServiceModelService 3.0.0.0' objects." ::= { advanced 114 } serviceModelService3Entry OBJECT-TYPE SYNTAX ServiceModelService3Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'ServiceModelService 3.0.0.0' object." INDEX { sms3Instance } ::= { serviceModelService3Table 1 } ServiceModelService3Entry ::= SEQUENCE { sms3Instance InstanceName, sms3Calls Gauge32, sms3CallsDuration Gauge32, sms3CallsFailed Gauge32, sms3CallsFailedPerSecond Gauge32, sms3CallsFaulted Gauge32, sms3CallsFaultedPerSecond Gauge32, sms3CallsOutstanding Gauge32, sms3CallsPerSecond Gauge32, sms3Instances Gauge32, sms3InstancesCreatedPerSecond Gauge32, sms3QueuedMessagesDropped Gauge32, sms3QueuedMessagesDroppedPerSec Gauge32, sms3QueuedMessagesRejected Gauge32, sms3QueuedMessagesRejectedPerSec Gauge32, sms3QueuedPoisonMessages Gauge32, sms3QueuedPoisonMessagesPerSec Gauge32, sms3ReliableMessagesDrop Gauge32, sms3ReliableMessagesDropPerSec Gauge32, sms3ReliableSessionsFaulted Gauge32, sms3ReliableSessionFaultedPerSec Gauge32, sms3CallsNotAuthorized Gauge32, sms3CallsNotAuthorizedPerSec Gauge32, sms3ValidationAuthFail Gauge32, sms3ValidationAuthFailPerSec Gauge32, sms3TransactedOpsAborted Gauge32, sms3TransactedOpsAbortedPerSec Gauge32, sms3TransactedOpsCommit Gauge32, sms3TransactedOpsCommitPerSec Gauge32, sms3TransactedOpsInDoubt Gauge32, sms3TransactedOpsInDoubtPerSec Gauge32, sms3TransactionsFlowed Gauge32, sms3TransactionsFlowedPerSec Gauge32 } sms3Instance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { serviceModelService3Entry 1 } sms3Calls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.Calls.aspx" ::= { serviceModelService3Entry 2 } sms3CallsDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The average duration of calls to this service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.CallDuration.aspx" ::= { serviceModelService3Entry 3 } sms3CallsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with unhandled exceptions in this service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.CallsFailed.aspx" ::= { serviceModelService3Entry 4 } sms3CallsFailedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls with unhandled exceptions in this service per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.CallsFailedPerSecond.aspx" ::= { serviceModelService3Entry 5 } sms3CallsFaulted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service that returned faults. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.CallsFaulted.aspx" ::= { serviceModelService3Entry 6 } sms3CallsFaultedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service that returned faults per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.CallsFaultedPerSecond.aspx" ::= { serviceModelService3Entry 7 } sms3CallsOutstanding OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service that are in progress. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.CallsOutstanding.aspx" ::= { serviceModelService3Entry 8 } sms3CallsPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.CallsPerSecond.aspx" ::= { serviceModelService3Entry 9 } sms3Instances OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of instances of the service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.Instances.aspx" ::= { serviceModelService3Entry 10 } sms3InstancesCreatedPerSecond OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The creation rate of service instances per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.InstancesPerSecond.aspx" ::= { serviceModelService3Entry 11 } sms3QueuedMessagesDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages to this service that were dropped by the queued transport. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.MsmqDroppedMessages.aspx" ::= { serviceModelService3Entry 12 } sms3QueuedMessagesDroppedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages to this service that were dropped by the queued transport per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.MsmqDroppedMessagesPerSecond.aspx" ::= { serviceModelService3Entry 13 } sms3QueuedMessagesRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages to this servcie that were rejected by the queued transport. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.MsmqRejectedMessages.aspx" ::= { serviceModelService3Entry 14 } sms3QueuedMessagesRejectedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages to this service that were rejected by the queued transport per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.MsmqRejectedMessagesPerSecond.aspx" ::= { serviceModelService3Entry 15 } sms3QueuedPoisonMessages OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages to this service that were marked poisoned by the queued transport. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.MsmqPoisonMessages.aspx" ::= { serviceModelService3Entry 16 } sms3QueuedPoisonMessagesPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of messages to this service that were marked poisoned by the queued transport per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.En dpoint.MsmqPoisonMessagesPerSecond.aspx" ::= { serviceModelService3Entry 17 } sms3ReliableMessagesDrop OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging messages that were dropped in this service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.RMMessagesDropped.aspx" ::= { serviceModelService3Entry 18 } sms3ReliableMessagesDropPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging messages that were dropped in this service per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.RMMessagesDroppedPerSecond.aspx" ::= { serviceModelService3Entry 19 } sms3ReliableSessionsFaulted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging sessions that were faulted in this service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.RMSessionsFaulted.aspx" ::= { serviceModelService3Entry 20 } sms3ReliableSessionFaultedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of reliable messaging sessions that were faulted in this service per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.RMSessionsFaultedPerSecond.aspx" ::= { serviceModelService3Entry 21 } sms3CallsNotAuthorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service that failed authorization. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.SecurityCallsNotAuthorized.aspx" ::= { serviceModelService3Entry 22 } sms3CallsNotAuthorizedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service that failed authorization per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.SecurityCallsNotAuthorizedPerSecond.aspx" ::= { serviceModelService3Entry 23 } sms3ValidationAuthFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service that failed validation or authentication. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.SecurityValidationAuthenticationFailures. aspx" ::= { serviceModelService3Entry 24 } sms3ValidationAuthFailPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls to this service that failed validation or authentication per second. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.SecurityValidationAuthenticationFailuresP erSecond.aspx" ::= { serviceModelService3Entry 25 } sms3TransactedOpsAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transacted operations with the outcome aborted in this service. Work done under such operations is rolled back. Resources are reverted to their previous state. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxAborted.aspx" ::= { serviceModelService3Entry 26 } sms3TransactedOpsAbortedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transacted operations with the outcome aborted in this service per second. Work done under such operations is rolled back. Resources are reverted to their previous state. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxAbortedPerSecond.aspx" ::= { serviceModelService3Entry 27 } sms3TransactedOpsCommit OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transacted operations with the outcome committed in this service. Work done under such operations is fully committed. Resources are updated in accordance with the work done in the operation. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxCommitted.aspx" ::= { serviceModelService3Entry 28 } sms3TransactedOpsCommitPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transacted operations with the outcome committed in this service per second. Work done under such operations is fully committed. Resources are updated in accordance with the work done in the operation. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxCommittedPerSecond.aspx" ::= { serviceModelService3Entry 29 } sms3TransactedOpsInDoubt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transacted operations with an outcome in doubt in this service. Work done with an outcome in doubt is in an indeterminate state. Resources are held pending outcome. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxInDoubt.aspx" ::= { serviceModelService3Entry 30 } sms3TransactedOpsInDoubtPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transacted operations with an outcome in doubt in this service per second. Work done with an outcome in doubt is in an indeterminate state. Resources are held pending outcome. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxInDoubtPerSecond.aspx" ::= { serviceModelService3Entry 31 } sms3TransactionsFlowed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions that flowed to operations in this service. This counter is incremented any time a transaction ID is present in the message that is sent to the service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxFlowed.aspx" ::= { serviceModelService3Entry 32 } sms3TransactionsFlowedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions that flowed to operations in this service per second. This counter is incremented any time a transaction ID is present in the message that is sent to the service. http://msdn.microsoft.com/en-US/library/System. ServiceModel.Diagnostics.PerformanceCounters.Se rvice.TxFlowedPerSecond.aspx" ::= { serviceModelService3Entry 33 } svcHost3 OBJECT-IDENTITY STATUS current DESCRIPTION "SMSvcHost 3.0.0.0 performance counters" ::= { advanced 115 } smsh3ConnsAcceptedOverNetPipe OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of named pipe connections accepted over net.pipe." ::= { svcHost3 1 } smsh3ConnsAcceptedOverNetTcp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of TCP connections accepted over net.tcp." ::= { svcHost3 2 } smsh3ConnsDispatchedOverNetPipe OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections dispatched over net.pipe." ::= { svcHost3 3 } smsh3ConnsDispatchedOverNetTcp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections dispatched over net.tcp." ::= { svcHost3 4 } smsh3DispatchFailuresOverNetPipe OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failures dispatching messages received over net.pipe." ::= { svcHost3 5 } smsh3DispatchFailuresOverNetTcp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failures dispatching messages received over net.tcp." ::= { svcHost3 6 } smsh3ProtocolFailuresOverNetPipe OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failures at the protocol layer of net.pipe." ::= { svcHost3 7 } smsh3ProtocolFailuresOverNetTcp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of failures at the protocol layer of net.tcp." ::= { svcHost3 8 } smsh3RegActiveForNetPipe OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uri registrations currently active for net.pipe." ::= { svcHost3 9 } smsh3RegActiveForNetTcp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uri registrations currently active for net.tcp." ::= { svcHost3 10 } smsh3UrisRegisteredForNetPipe OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of uris that were succesfully registered for net.pipe." ::= { svcHost3 11 } smsh3UrisRegisteredForNetTcp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of uris that were succesfully registered for net.tcp." ::= { svcHost3 12 } smsh3UrisUnregisteredForNetPipe OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of uris that were succesfully unregistered for net.pipe." ::= { svcHost3 13 } smsh3UrisUnregisteredForNetTcp OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of uris that were succesfully unregistered for net.tcp." ::= { svcHost3 14 } aspDotNETv1 OBJECT IDENTIFIER ::= { advanced 116 } adn1ApplicationRestarts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the application has been restarted during the web server's lifetime." ::= { aspDotNETv1 1 } adn1ApplicationsRunning OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of currently running web applications." ::= { aspDotNETv1 2 } adn1RequestExecutionTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds that it took to execute the most recent request." ::= { aspDotNETv1 3 } adn1RequestWaitTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds the most recent request was waiting in the queue." ::= { aspDotNETv1 4 } adn1RequestsCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of requests, including those that are queued, currently executing, or waiting to be written to the client. Under the ASP.NET process model, when this counter exceeds the requestQueueLimit defined in the processModel configuration section, ASP.NET will begin rejecting requests." ::= { aspDotNETv1 5 } adn1RequestsDisconnected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests disconnected due to communication errors or user terminated." ::= { aspDotNETv1 6 } adn1RequestsQueued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests waiting to be processed." ::= { aspDotNETv1 7 } adn1RequestsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests rejected because the request queue was full." ::= { aspDotNETv1 8 } adn1StateServerSessionsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been explicitly abandoned." ::= { aspDotNETv1 9 } adn1StateServerSessionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions currently active." ::= { aspDotNETv1 10 } adn1StateServerSessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { aspDotNETv1 11 } adn1StateServerSessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions total." ::= { aspDotNETv1 12 } adn1WorkerProcessRestarts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a worker process has restarted on the machine." ::= { aspDotNETv1 13 } adn1WorkerProcessesRunning OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of worker processes running on the machine." ::= { aspDotNETv1 14 } aspDotNETApplicationsV1Table OBJECT-TYPE SYNTAX SEQUENCE OF ASPDotNETApplicationsV1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'ASP.NET Apps v1.1.4322' objects." ::= { advanced 117 } aspDotNETApplicationsV1Entry OBJECT-TYPE SYNTAX ASPDotNETApplicationsV1Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'ASP.NET Apps v1.1.4322' object." INDEX { adnAppl1Instance } ::= { aspDotNETApplicationsV1Table 1 } ASPDotNETApplicationsV1Entry ::= SEQUENCE { adnAppl1Instance InstanceName, adnAppl1AnonymousRequests Gauge32, adnAppl1AnonymousRequestsPerSec Gauge32, adnAppl1CacheAPIEntries Gauge32, adnAppl1CacheAPIHitRatio Gauge32, adnAppl1CacheAPIHits Gauge32, adnAppl1CacheAPIMisses Gauge32, adnAppl1CacheAPITurnoverRate Gauge32, adnAppl1CacheTotalEntries Gauge32, adnAppl1CacheTotalHitRatio Gauge32, adnAppl1CacheTotalHits Gauge32, adnAppl1CacheTotalMisses Gauge32, adnAppl1CacheTotalTurnoverRate Gauge32, adnAppl1CompilationsTotal Gauge32, adnAppl1DebuggingRequests Gauge32, adnAppl1ErrorsDuringCompilation Gauge32, adnAppl1ErrorsDuringExecution Gauge32, adnAppl1ErrorDuringPreprocessing Gauge32, adnAppl1ErrorsTotal Gauge32, adnAppl1ErrorsTotalPerSec Gauge32, adnAppl1ErrorUnhandledDuringExec Gauge32, adnAppl1ErrorUnhandledExecPerSec Gauge32, adnAppl1OutputCacheEntries Gauge32, adnAppl1OutputCacheHitRatio Gauge32, adnAppl1OutputCacheHits Gauge32, adnAppl1OutputCacheMisses Gauge32, adnAppl1OutputCacheTurnoverRate Gauge32, adnAppl1PipelineInstanceCount Gauge32, adnAppl1RequestBytesInTotal Gauge32, adnAppl1RequestBytesOutTotal Gauge32, adnAppl1RequestsExecuting Gauge32, adnAppl1RequestsFailed Gauge32, adnAppl1RequestsInApplQueue Gauge32, adnAppl1RequestsNotAuthorized Gauge32, adnAppl1RequestsNotFound Gauge32, adnAppl1RequestsSucceeded Gauge32, adnAppl1RequestsTimedOut Gauge32, adnAppl1RequestsTotal Gauge32, adnAppl1RequestsPerSec Gauge32, adnAppl1SessionSQLSvrConnTotal Gauge32, adnAppl1SessionStateSvrConnTotal Gauge32, adnAppl1SessionsAbandoned Gauge32, adnAppl1SessionsActive Gauge32, adnAppl1SessionsTimedOut Gauge32, adnAppl1SessionsTotal Gauge32, adnAppl1TransactionsAborted Gauge32, adnAppl1TransactionsCommitted Gauge32, adnAppl1TransactionsPending Gauge32, adnAppl1TransactionsTotal Gauge32, adnAppl1TransactionsPerSec Gauge32 } adnAppl1Instance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { aspDotNETApplicationsV1Entry 1 } adnAppl1AnonymousRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests utilizing anonymous authentication." ::= { aspDotNETApplicationsV1Entry 2 } adnAppl1AnonymousRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Authentication Anonymous Requests/Sec" ::= { aspDotNETApplicationsV1Entry 3 } adnAppl1CacheAPIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries within the cache added by the user." ::= { aspDotNETApplicationsV1Entry 4 } adnAppl1CacheAPIHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits called from user code." ::= { aspDotNETApplicationsV1Entry 5 } adnAppl1CacheAPIHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cache hits from user code." ::= { aspDotNETApplicationsV1Entry 6 } adnAppl1CacheAPIMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cache misses called from user code." ::= { aspDotNETApplicationsV1Entry 7 } adnAppl1CacheAPITurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the API cache per second." ::= { aspDotNETApplicationsV1Entry 8 } adnAppl1CacheTotalEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries within the cache (both internal and user added)" ::= { aspDotNETApplicationsV1Entry 9 } adnAppl1CacheTotalHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits from all cache calls." ::= { aspDotNETApplicationsV1Entry 10 } adnAppl1CacheTotalHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hits from the cache." ::= { aspDotNETApplicationsV1Entry 11 } adnAppl1CacheTotalMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of cache misses." ::= { aspDotNETApplicationsV1Entry 12 } adnAppl1CacheTotalTurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the total cache per second." ::= { aspDotNETApplicationsV1Entry 13 } adnAppl1CompilationsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of .asax, .ascx, .ashx, .asmx, or .aspx source files dynamically compiled." ::= { aspDotNETApplicationsV1Entry 14 } adnAppl1DebuggingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of debugging requests processed." ::= { aspDotNETApplicationsV1Entry 15 } adnAppl1ErrorsDuringCompilation OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during compilation." ::= { aspDotNETApplicationsV1Entry 16 } adnAppl1ErrorsDuringExecution OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during the processing of a request." ::= { aspDotNETApplicationsV1Entry 17 } adnAppl1ErrorDuringPreprocessing OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during parsing and configuration." ::= { aspDotNETApplicationsV1Entry 18 } adnAppl1ErrorsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of errors occurred." ::= { aspDotNETApplicationsV1Entry 19 } adnAppl1ErrorsTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of errors occurred." ::= { aspDotNETApplicationsV1Entry 20 } adnAppl1ErrorUnhandledDuringExec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors not handled by user code, but by the default error handler." ::= { aspDotNETApplicationsV1Entry 21 } adnAppl1ErrorUnhandledExecPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of unhandled errors." ::= { aspDotNETApplicationsV1Entry 22 } adnAppl1OutputCacheEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries in the output cache." ::= { aspDotNETApplicationsV1Entry 23 } adnAppl1OutputCacheHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits to requests for output cacheable requests." ::= { aspDotNETApplicationsV1Entry 24 } adnAppl1OutputCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ouput cacheable requests served from the output cache." ::= { aspDotNETApplicationsV1Entry 25 } adnAppl1OutputCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of ouput cacheable requests not served from the output cache." ::= { aspDotNETApplicationsV1Entry 26 } adnAppl1OutputCacheTurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the output cache per second." ::= { aspDotNETApplicationsV1Entry 27 } adnAppl1PipelineInstanceCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active pipeline instances." ::= { aspDotNETApplicationsV1Entry 28 } adnAppl1RequestBytesInTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of all requests." ::= { aspDotNETApplicationsV1Entry 29 } adnAppl1RequestBytesOutTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of responses sent to a client. This does not include standard HTTP response headers." ::= { aspDotNETApplicationsV1Entry 30 } adnAppl1RequestsExecuting OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests currently executing." ::= { aspDotNETApplicationsV1Entry 31 } adnAppl1RequestsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of failed requests." ::= { aspDotNETApplicationsV1Entry 32 } adnAppl1RequestsInApplQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests in the application request queue." ::= { aspDotNETApplicationsV1Entry 33 } adnAppl1RequestsNotAuthorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests failed due to unauthorized access." ::= { aspDotNETApplicationsV1Entry 34 } adnAppl1RequestsNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests for resources that were not found." ::= { aspDotNETApplicationsV1Entry 35 } adnAppl1RequestsSucceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that executed successfully." ::= { aspDotNETApplicationsV1Entry 36 } adnAppl1RequestsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that timed out." ::= { aspDotNETApplicationsV1Entry 37 } adnAppl1RequestsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests since the application was started." ::= { aspDotNETApplicationsV1Entry 38 } adnAppl1RequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests executed per second." ::= { aspDotNETApplicationsV1Entry 39 } adnAppl1SessionSQLSvrConnTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections to the SQL Server used by session state." ::= { aspDotNETApplicationsV1Entry 40 } adnAppl1SessionStateSvrConnTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections to the State Server used by session state." ::= { aspDotNETApplicationsV1Entry 41 } adnAppl1SessionsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been explicitly abandoned." ::= { aspDotNETApplicationsV1Entry 42 } adnAppl1SessionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions currently active." ::= { aspDotNETApplicationsV1Entry 43 } adnAppl1SessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { aspDotNETApplicationsV1Entry 44 } adnAppl1SessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of sessions since the application was started." ::= { aspDotNETApplicationsV1Entry 45 } adnAppl1TransactionsAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions aborted." ::= { aspDotNETApplicationsV1Entry 46 } adnAppl1TransactionsCommitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions committed." ::= { aspDotNETApplicationsV1Entry 47 } adnAppl1TransactionsPending OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transactions in progress." ::= { aspDotNETApplicationsV1Entry 48 } adnAppl1TransactionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transactions since the application was started." ::= { aspDotNETApplicationsV1Entry 49 } adnAppl1TransactionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transactions started per second." ::= { aspDotNETApplicationsV1Entry 50 } aspDotNETv2 OBJECT IDENTIFIER ::= { advanced 118 } adn2ApplicationRestarts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the application has been restarted during the web server's lifetime." ::= { aspDotNETv2 1 } adn2ApplicationsRunning OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of currently running web applications." ::= { aspDotNETv2 2 } adn2AuditFailureEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit failures in the application since it was started." ::= { aspDotNETv2 3 } adn2AuditSuccessEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit successes in the application since it was started." ::= { aspDotNETv2 4 } adn2ErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error events raised since the application was started." ::= { aspDotNETv2 5 } adn2InfraErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HTTP error events raised since the application was started." ::= { aspDotNETv2 6 } adn2RequestErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of runtime error events raised since the application was started." ::= { aspDotNETv2 7 } adn2RequestExecutionTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds that it took to execute the most recent request." ::= { aspDotNETv2 8 } adn2RequestWaitTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds the most recent request was waiting in the queue." ::= { aspDotNETv2 9 } adn2RequestsCurrent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of requests, including those that are queued, currently executing, or waiting to be written to the client. Under the ASP.NET process model, when this counter exceeds the requestQueueLimit defined in the processModel configuration section, ASP.NET will begin rejecting requests." ::= { aspDotNETv2 10 } adn2RequestsDisconnected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests disconnected due to communication errors or user terminated." ::= { aspDotNETv2 11 } adn2RequestsQueued OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests waiting to be processed." ::= { aspDotNETv2 12 } adn2RequestsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests rejected because the request queue was full." ::= { aspDotNETv2 13 } adn2StateServerSessionsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been explicitly abandoned." ::= { aspDotNETv2 14 } adn2StateServerSessionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions currently active." ::= { aspDotNETv2 15 } adn2StateServerSessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { aspDotNETv2 16 } adn2StateServerSessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions total." ::= { aspDotNETv2 17 } adn2WorkerProcessRestarts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times a worker process has restarted on the machine." ::= { aspDotNETv2 18 } adn2WorkerProcessesRunning OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of worker processes running on the machine." ::= { aspDotNETv2 19 } aspDotNETApplicationsV2Table OBJECT-TYPE SYNTAX SEQUENCE OF ASPDotNETApplicationsV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'ASP.NET Apps v2.0.50727' objects." ::= { advanced 119 } aspDotNETApplicationsV2Entry OBJECT-TYPE SYNTAX ASPDotNETApplicationsV2Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'ASP.NET Apps v2.0.50727' object." INDEX { adnAppl2Instance } ::= { aspDotNETApplicationsV2Table 1 } ASPDotNETApplicationsV2Entry ::= SEQUENCE { adnAppl2Instance InstanceName, adnAppl2AnonymousRequests Gauge32, adnAppl2AnonymousRequestsPerSec Gauge32, adnAppl2ApplLifetimeEvents Gauge32, adnAppl2ApplLifetimeEventsPerSec Gauge32, adnAppl2AuditFailureEventsRaised Gauge32, adnAppl2AuditSuccessEventsRaised Gauge32, adnAppl2CachePctMachMemLimUsed Gauge32, adnAppl2CachePctProcMemLimUsed Gauge32, adnAppl2CacheAPIEntries Gauge32, adnAppl2CacheAPIHitRatio Gauge32, adnAppl2CacheAPIHits Gauge32, adnAppl2CacheAPIMisses Gauge32, adnAppl2CacheAPITrims Gauge32, adnAppl2CacheAPITurnoverRate Gauge32, adnAppl2CacheTotalEntries Gauge32, adnAppl2CacheTotalHitRatio Gauge32, adnAppl2CacheTotalHits Gauge32, adnAppl2CacheTotalMisses Gauge32, adnAppl2CacheTotalTrims Gauge32, adnAppl2CacheTotalTurnoverRate Gauge32, adnAppl2CompilationsTotal Gauge32, adnAppl2DebuggingRequests Gauge32, adnAppl2ErrorEventsRaised Gauge32, adnAppl2ErrorEventsRaisedPerSec Gauge32, adnAppl2ErrorsDuringCompilation Gauge32, adnAppl2ErrorsDuringExecution Gauge32, adnAppl2ErrorDuringPreprocessing Gauge32, adnAppl2ErrorsTotal Gauge32, adnAppl2ErrorsTotalPerSec Gauge32, adnAppl2ErrorUnhandledDuringExec Gauge32, adnAppl2ErrorUnhandledExecPerSec Gauge32, adnAppl2EventsRaised Gauge32, adnAppl2EventsRaisedPerSec Gauge32, adnAppl2FormsAuthenticationFail Gauge32, adnAppl2FormsAuthenticationSucc Gauge32, adnAppl2InfraErrorEventsRaised Gauge32, adnAppl2InfraErrEventRaisePerSec Gauge32, adnAppl2MembershipAuthFailure Gauge32, adnAppl2MembershipAuthSuccess Gauge32, adnAppl2OutputCacheEntries Gauge32, adnAppl2OutputCacheHitRatio Gauge32, adnAppl2OutputCacheHits Gauge32, adnAppl2OutputCacheMisses Gauge32, adnAppl2OutputCacheTrims Gauge32, adnAppl2OutputCacheTurnoverRate Gauge32, adnAppl2PipelineInstanceCount Gauge32, adnAppl2RequestBytesInTotal Gauge32, adnAppl2RequestBytesOutTotal Gauge32, adnAppl2RequestErrorEventsRaised Gauge32, adnAppl2ReqErrorEventRaisePerSec Gauge32, adnAppl2RequestEventsRaised Gauge32, adnAppl2RequestEventsRaisePerSec Gauge32, adnAppl2RequestExecutionTime Gauge32, adnAppl2RequestWaitTime Gauge32, adnAppl2RequestsDisconnected Gauge32, adnAppl2RequestsExecuting Gauge32, adnAppl2RequestsFailed Gauge32, adnAppl2RequestsInApplQueue Gauge32, adnAppl2RequestsNotAuthorized Gauge32, adnAppl2RequestsNotFound Gauge32, adnAppl2RequestsRejected Gauge32, adnAppl2RequestsSucceeded Gauge32, adnAppl2RequestsTimedOut Gauge32, adnAppl2RequestsTotal Gauge32, adnAppl2RequestsPerSec Gauge32, adnAppl2SessionSQLSvrConnTotal Gauge32, adnAppl2SessionStateSvrConnTotal Gauge32, adnAppl2SessionsAbandoned Gauge32, adnAppl2SessionsActive Gauge32, adnAppl2SessionsTimedOut Gauge32, adnAppl2SessionsTotal Gauge32, adnAppl2TransactionsAborted Gauge32, adnAppl2TransactionsCommitted Gauge32, adnAppl2TransactionsPending Gauge32, adnAppl2TransactionsTotal Gauge32, adnAppl2TransactionsPerSec Gauge32, adnAppl2ViewstateMACValidFailure Gauge32 } adnAppl2Instance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { aspDotNETApplicationsV2Entry 1 } adnAppl2AnonymousRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests utilizing anonymous authentication." ::= { aspDotNETApplicationsV2Entry 2 } adnAppl2AnonymousRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Authentication Anonymous Requests/Sec" ::= { aspDotNETApplicationsV2Entry 3 } adnAppl2ApplLifetimeEvents OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of application events raised since the application was started." ::= { aspDotNETApplicationsV2Entry 4 } adnAppl2ApplLifetimeEventsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of application events raised per second." ::= { aspDotNETApplicationsV2Entry 5 } adnAppl2AuditFailureEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit failures in the application since it was started." ::= { aspDotNETApplicationsV2Entry 6 } adnAppl2AuditSuccessEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of audit successes in the application since it was started." ::= { aspDotNETApplicationsV2Entry 7 } adnAppl2CachePctMachMemLimUsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of physical memory used by the machine divided by the physical memory limit for the cache, as a percentage. When this reaches 100%, half of the cache entries will be forcibly removed. The __Total__ instance is the average of all instances, and therefore cannot be used to determine when cache entries will be forcibly removed." ::= { aspDotNETApplicationsV2Entry 8 } adnAppl2CachePctProcMemLimUsed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of private bytes for the worker process divided by the private bytes memory limit for the cache, as a percentage. When this reaches 100%, half of the cache entries will be forcibly removed. The __Total__ instance is the average of all instances, and therefore cannot be used to determine when cache entries will be forcibly removed." ::= { aspDotNETApplicationsV2Entry 9 } adnAppl2CacheAPIEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries within the cache added by the user." ::= { aspDotNETApplicationsV2Entry 10 } adnAppl2CacheAPIHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits called from user code." ::= { aspDotNETApplicationsV2Entry 11 } adnAppl2CacheAPIHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cache hits from user code." ::= { aspDotNETApplicationsV2Entry 12 } adnAppl2CacheAPIMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of cache misses called from user code." ::= { aspDotNETApplicationsV2Entry 13 } adnAppl2CacheAPITrims OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries forcibly removed from the cache due to memory pressure that were originally inserted into the cache using one of the public cache APIs." ::= { aspDotNETApplicationsV2Entry 14 } adnAppl2CacheAPITurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the API cache per second." ::= { aspDotNETApplicationsV2Entry 15 } adnAppl2CacheTotalEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries within the cache (both internal and user added)" ::= { aspDotNETApplicationsV2Entry 16 } adnAppl2CacheTotalHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits from all cache calls." ::= { aspDotNETApplicationsV2Entry 17 } adnAppl2CacheTotalHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of hits from the cache." ::= { aspDotNETApplicationsV2Entry 18 } adnAppl2CacheTotalMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of cache misses." ::= { aspDotNETApplicationsV2Entry 19 } adnAppl2CacheTotalTrims OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries forcibly removed from the cache due to memory pressure." ::= { aspDotNETApplicationsV2Entry 20 } adnAppl2CacheTotalTurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the total cache per second." ::= { aspDotNETApplicationsV2Entry 21 } adnAppl2CompilationsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of .asax, .ascx, .ashx, .asmx, or .aspx source files dynamically compiled." ::= { aspDotNETApplicationsV2Entry 22 } adnAppl2DebuggingRequests OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of debugging requests processed." ::= { aspDotNETApplicationsV2Entry 23 } adnAppl2ErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error events raised since the application was started." ::= { aspDotNETApplicationsV2Entry 24 } adnAppl2ErrorEventsRaisedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of error events per second." ::= { aspDotNETApplicationsV2Entry 25 } adnAppl2ErrorsDuringCompilation OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during compilation." ::= { aspDotNETApplicationsV2Entry 26 } adnAppl2ErrorsDuringExecution OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during the processing of a request." ::= { aspDotNETApplicationsV2Entry 27 } adnAppl2ErrorDuringPreprocessing OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors that have occurred during parsing and configuration." ::= { aspDotNETApplicationsV2Entry 28 } adnAppl2ErrorsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of errors occurred." ::= { aspDotNETApplicationsV2Entry 29 } adnAppl2ErrorsTotalPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of errors occurred." ::= { aspDotNETApplicationsV2Entry 30 } adnAppl2ErrorUnhandledDuringExec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of errors not handled by user code, but by the default error handler." ::= { aspDotNETApplicationsV2Entry 31 } adnAppl2ErrorUnhandledExecPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rate of unhandled errors." ::= { aspDotNETApplicationsV2Entry 32 } adnAppl2EventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of instrumentation events raised since the application was started." ::= { aspDotNETApplicationsV2Entry 33 } adnAppl2EventsRaisedPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of instrumentation events per second." ::= { aspDotNETApplicationsV2Entry 34 } adnAppl2FormsAuthenticationFail OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failed forms authentication ticket validations since the application was started." ::= { aspDotNETApplicationsV2Entry 35 } adnAppl2FormsAuthenticationSucc OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful forms authentication ticket validations since the application was started." ::= { aspDotNETApplicationsV2Entry 36 } adnAppl2InfraErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HTTP error events raised since the application was started." ::= { aspDotNETApplicationsV2Entry 37 } adnAppl2InfraErrEventRaisePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of HTTP error events raised per second." ::= { aspDotNETApplicationsV2Entry 38 } adnAppl2MembershipAuthFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failed membership credential validations since the application was started." ::= { aspDotNETApplicationsV2Entry 39 } adnAppl2MembershipAuthSuccess OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of successful membership credential validations since the application was started." ::= { aspDotNETApplicationsV2Entry 40 } adnAppl2OutputCacheEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number of entries in the output cache." ::= { aspDotNETApplicationsV2Entry 41 } adnAppl2OutputCacheHitRatio OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Ratio of hits to requests for output cacheable requests." ::= { aspDotNETApplicationsV2Entry 42 } adnAppl2OutputCacheHits OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of output cacheable requests served from the output cache." ::= { aspDotNETApplicationsV2Entry 43 } adnAppl2OutputCacheMisses OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of output cacheable requests not served from the output cache." ::= { aspDotNETApplicationsV2Entry 44 } adnAppl2OutputCacheTrims OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of entries forcibly removed from the cache due to memory pressure that were originally inserted into the cache by the output cache feature." ::= { aspDotNETApplicationsV2Entry 45 } adnAppl2OutputCacheTurnoverRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of additions and removals to the output cache per second." ::= { aspDotNETApplicationsV2Entry 46 } adnAppl2PipelineInstanceCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of active pipeline instances." ::= { aspDotNETApplicationsV2Entry 47 } adnAppl2RequestBytesInTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of all requests." ::= { aspDotNETApplicationsV2Entry 48 } adnAppl2RequestBytesOutTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total size, in bytes, of responses sent to a client. This does not include standard HTTP response headers." ::= { aspDotNETApplicationsV2Entry 49 } adnAppl2RequestErrorEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of runtime error events raised since the application was started." ::= { aspDotNETApplicationsV2Entry 50 } adnAppl2ReqErrorEventRaisePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of runtime error events per second." ::= { aspDotNETApplicationsV2Entry 51 } adnAppl2RequestEventsRaised OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of request events raised since the application was started" ::= { aspDotNETApplicationsV2Entry 52 } adnAppl2RequestEventsRaisePerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of request events raised per second." ::= { aspDotNETApplicationsV2Entry 53 } adnAppl2RequestExecutionTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds that it took to execute the most recent request." ::= { aspDotNETApplicationsV2Entry 54 } adnAppl2RequestWaitTime OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of milliseconds the most recent request was waiting in the queue." ::= { aspDotNETApplicationsV2Entry 55 } adnAppl2RequestsDisconnected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests disconnected due to communication errors or user terminated." ::= { aspDotNETApplicationsV2Entry 56 } adnAppl2RequestsExecuting OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests currently executing." ::= { aspDotNETApplicationsV2Entry 57 } adnAppl2RequestsFailed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of failed requests." ::= { aspDotNETApplicationsV2Entry 58 } adnAppl2RequestsInApplQueue OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests in the application request queue." ::= { aspDotNETApplicationsV2Entry 59 } adnAppl2RequestsNotAuthorized OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of requests failed due to unauthorized access." ::= { aspDotNETApplicationsV2Entry 60 } adnAppl2RequestsNotFound OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests for resources that were not found." ::= { aspDotNETApplicationsV2Entry 61 } adnAppl2RequestsRejected OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests rejected because the application request queue was full." ::= { aspDotNETApplicationsV2Entry 62 } adnAppl2RequestsSucceeded OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that executed successfully." ::= { aspDotNETApplicationsV2Entry 63 } adnAppl2RequestsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests that timed out." ::= { aspDotNETApplicationsV2Entry 64 } adnAppl2RequestsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of requests since the application was started." ::= { aspDotNETApplicationsV2Entry 65 } adnAppl2RequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of requests executed per second." ::= { aspDotNETApplicationsV2Entry 66 } adnAppl2SessionSQLSvrConnTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections to the SQL Server used by session state." ::= { aspDotNETApplicationsV2Entry 67 } adnAppl2SessionStateSvrConnTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of connections to the State Server used by session state." ::= { aspDotNETApplicationsV2Entry 68 } adnAppl2SessionsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been explicitly abandoned." ::= { aspDotNETApplicationsV2Entry 69 } adnAppl2SessionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions currently active." ::= { aspDotNETApplicationsV2Entry 70 } adnAppl2SessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { aspDotNETApplicationsV2Entry 71 } adnAppl2SessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of sessions since the application was started." ::= { aspDotNETApplicationsV2Entry 72 } adnAppl2TransactionsAborted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions aborted." ::= { aspDotNETApplicationsV2Entry 73 } adnAppl2TransactionsCommitted OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of transactions committed." ::= { aspDotNETApplicationsV2Entry 74 } adnAppl2TransactionsPending OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of transactions in progress." ::= { aspDotNETApplicationsV2Entry 75 } adnAppl2TransactionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of transactions since the application was started." ::= { aspDotNETApplicationsV2Entry 76 } adnAppl2TransactionsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Transactions started per second." ::= { aspDotNETApplicationsV2Entry 77 } adnAppl2ViewstateMACValidFailure OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of viewstate MAC validations that failed since the application was started." ::= { aspDotNETApplicationsV2Entry 78 } aspDotNETStateService OBJECT IDENTIFIER ::= { advanced 120 } adnssSessionsAbandoned OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions that have been explicitly abandoned." ::= { aspDotNETStateService 1 } adnssSessionsActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of sessions currently active." ::= { aspDotNETStateService 2 } adnssSessionsTimedOut OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions timed out." ::= { aspDotNETStateService 3 } adnssSessionsTotal OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions total." ::= { aspDotNETStateService 4 } authorizationManagerApplTable OBJECT-TYPE SYNTAX SEQUENCE OF AuthorizationManagerApplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'Authorization Manager Applications' objects." ::= { advanced 121 } authorizationManagerApplEntry OBJECT-TYPE SYNTAX AuthorizationManagerApplEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Authorization Manager Applications' object." INDEX { amaInstance } ::= { authorizationManagerApplTable 1 } AuthorizationManagerApplEntry ::= SEQUENCE { amaInstance InstanceName, amaNumberOfScopesLoadedInMemory Gauge32, amaTotalNumberOfScopes Gauge32 } amaInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { authorizationManagerApplEntry 1 } amaNumberOfScopesLoadedInMemory OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the number of scopes that are currently loaded in memory" ::= { authorizationManagerApplEntry 2 } amaTotalNumberOfScopes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Shows the total number of scopes in the application" ::= { authorizationManagerApplEntry 3 } certificationAuthorityTable OBJECT-TYPE SYNTAX SEQUENCE OF CertificationAuthorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing performance information for instances of 'Certification Authority' objects." ::= { advanced 122 } certificationAuthorityEntry OBJECT-TYPE SYNTAX CertificationAuthorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance information for one particular instance of 'Certification Authority' object." INDEX { caInstance } ::= { certificationAuthorityTable 1 } CertificationAuthorityEntry ::= SEQUENCE { caInstance InstanceName, caFailedRequestsPerSec Gauge32, caIssuedRequestsPerSec Gauge32, caPendingRequestsPerSec Gauge32, caRequestCryptographicSignTimeMs Gauge32, caRequestPolicyModulePrcTimeMs Gauge32, caRequestProcessingTimeMs Gauge32, caRequestsPerSec Gauge32, caRetrievalProcessingTimeMs Gauge32, caRetrievalsPerSec Gauge32 } caInstance OBJECT-TYPE SYNTAX InstanceName MAX-ACCESS read-only STATUS current DESCRIPTION "Instance name." ::= { certificationAuthorityEntry 1 } caFailedRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Failed certificate requests processed per second" ::= { certificationAuthorityEntry 2 } caIssuedRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Issued certificate requests processed per second" ::= { certificationAuthorityEntry 3 } caPendingRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Pending certificate requests processed per second" ::= { certificationAuthorityEntry 4 } caRequestCryptographicSignTimeMs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed for signing operation per request" ::= { certificationAuthorityEntry 5 } caRequestPolicyModulePrcTimeMs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed for policy module processing per request" ::= { certificationAuthorityEntry 6 } caRequestProcessingTimeMs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed per request" ::= { certificationAuthorityEntry 7 } caRequestsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Certificate requests processed per second" ::= { certificationAuthorityEntry 8 } caRetrievalProcessingTimeMs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Time elapsed per certificate retrieval request" ::= { certificationAuthorityEntry 9 } caRetrievalsPerSec OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Certifi